February 2011
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
NC7SZ19
TinyLogic® UHS 1-of-2 Decoder / Demultiplexer
Features
Ultra-High Speed: tPD 2.7ns Typical at 5V
VCC
Broad VCC Operating Range: 1.65V to 5.55V
Power Down High Impedance Inputs/Outputs
Over-Voltage Tolerance Inputs Facilitate 5V to 3V
Translation
Proprietary Noise/EMI Reduction Circuitry
Ultra-Small MicroPak™ Packages
Description
The NC7SZ19 is a 1-of-2 decoder with a common
output enable. The device is fabricated with advanced
CMOS technology to achieve ultra-high speed with high
output drive while maintaining low static power
dissipation over a broad VCC operating range. The
device is specified to operate over the 1.65V to 5.5V VCC
range. The inputs and outputs are high impedance when
VCC is 0V. Inputs tolerate voltages up to 5.5V
independent of VCC operating voltage.
Ordering Information
Part Number Top Mark Package Packing Method
NC7SZ19P6X Z19 6-Lead SC70, EIAJ SC88 1.25mm Wide 3000 Units on Tape & Reel
NC7SZ19L6X B4 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & Reel
NC7SZ19FHX B4 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel
TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation.
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 2
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
Pin Configurations
Figure 1. SC70 (Top View) Figure 2. MicroPak™ (Top Through View)
Figure 3. Pin 1 Orientation
Notes:
1. AAA represents product code top mark (see Ordering Information).
2. Orientation of top mark determines pin one location.
3. Reading the top mark left to right, pin one is the lower left pin.
Pin Definitions
Pin # SC70 Pin # MicroPak™ Name Description
1 1 A Decoder Address / Demultiplexer Select
2 2 GND Ground
3 3 /E Decoder Output Enable / Demultiplexer Data
4 4 Y1 Output
5 5 VCC Supply Voltage
6 6 Y0 Output
Function Table
Inputs Output
A /E Y0 = A + /E Y1 = /A + /E
L L L H
H L H L
X H H H
H = HIGH Logic Level
L = LOW Logic Level
X = Don’t Care
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 3
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol Parameter Min. Max. Unit
VCC Supply Voltage -0.5 7.0 V
VIN DC Input Voltage -0.5 7.0 V
VOUT DC Output Voltage -0.5 7.0 V
IIK DC Input Diode Current VIN < -0.5V -50 mA
IOK DC Output Diode Current VIN < -0.5V -50 mA
IOUT DC Output Current ±50 mA
ICC or IGND DC VCC or Ground Current ±100 mA
TSTG Storage Temperature Range -65 +150 °C
TJ Junction Temperature Under Bias +150 °C
TL Junction Lead Temperature (Soldering, 10 Seconds) +260 °C
PD Power Dissipation at +85°C SC70-6 180
mW MicroPak™-6 130
MicroPak2™-6 120
ESD Human Body Model, JEDEC:JESD22-A114 4000 V
Charge Device Model, JEDEC:JESD22-C101 2000
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol Parameter Conditions Min. Max. Unit
VCC Supply Voltage Operating 1.65 5.50
V
Supply Voltage Data Retention 1.5 5.5
VIN Input Voltage 0 5.5 V
VOUT Output Voltage 0 VCC V
tr, tf Input Rise and Fall Times
VCC at 1.8V, ±0.15V,
2.5V ± 0.2V 0 20
ns/V
VCC at 3.3V ± 0.3V 0 10
VCC at 5.0V ± 0.5V 0 5
TA Operating Temperature -40 +85 °C
JA Thermal Resistance SC70-6 425
°C/W
MicroPak™-6 500
MicroPak2™-6 560
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 4
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
DC Electrical Characteristics
Symbol Parameter VCC Condition TA=+25°C TA=-40 to
+85°C Unit
Min. Typ. Max. Min. Max.
VIH HIGH Level Input
Voltage 1.65 0.75VCC 0.75VCC V
2.30 to 5.50 0.70VCC 0.70VCC
VIL LOW Level Input
Voltage 1.65 0.25VCC 0.25VCC V
2.30 to 5.50 0.30VCC 0.30VCC
VOH HIGH Level
Output Voltage
1.65 VIN=VIH,
or VOL,
IOH=-100µA
1.55 1.65 1.55
V
2.30 2.20 2.30 2.20
3.00 2.90 3.00 2.90
4.50 4.40 4.50 4.40
1.65 IOH=-4mA 1.29 1.52 1.29
2.30 IOH=-8mA 1.90 2.15 1.90
3.00 IOH=-16mA 2.40 2.80 2.40
3.00 IOH=-24mA 2.30 3.68 2.30
4.50 IOH=-32mA 3.80 4.20 3.80
VOL LOW Level
Output Voltage
1.65
VIN=VIL ,or, VIH,
IOL=100µA
0.00 0.10 0.10
V
2.30 0.00 0.10 0.10
3.00 0.00 0.10 0.10
4.50 0.00 0.10 0.10
1.65 IOL=4mA 0.08 0.24 0.24
2.30 IOL=8mA 0.10 0.30 0.30
3.00 IOL=16mA 0.15 0.40 0.40
3.00 IOL=24mA 0.22 0.55 0.55
4.50 IOL=32mA 0.22 0.55 0.55
IIN Input Leakage
Current 0 to 5.5 VIN=5.5V, GND ±0.1 ±1.0 µA
IOFF Power Off
Leakage Current 0 VIN or VOUT=5.5V 1 10 µA
ICC Quiescent
Supply Current 1.65 to 5.50 VIN=5.5V, GND 1 10 µA
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 5
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
AC Electrical Characteristics
Symbol Parameter VCC Condition TA=+25°C TA=-40 to
+85°C Unit Figure
Min. Typ. Max. Min. Max.
tPLH, tPHL Propagation Delay
A or /E to Output
1.80 ± 0.15
CL=15pF,
RL=1M
2.5 5.9 10.5 2.5 11.0
ns Figure 5
Figure 6
2.50 ± 0.20 1.2 3.5 6.0 1.2 6.4
3.30 ± 0.30 0.8 2.7 4.1 0.8 4.5
5.00 ± 0.50 0.5 2.1 3.2 0.5 3.5
3.30 ± 0.30 CL=50pF,
RL=500 1.2 3.2 5.1 1.2 5.4
5.00 ± 0.50 0.8 2.7 4.0 0.8 4.3
CIN Input Capacitance 0 2.3 pF
CPD Power Dissipation
Capacitance(4) 3.30 10.5 pF Figure 5
5.00 12.8
Note:
4. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating
current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic
operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic).
Notes:
5. CL includes load and stray capacitance.
6. Input PRR = 1.0MHz, tW = 500ns.
Figure 4. AC Test Circuit
Figure 5. ICCD Test Circuit Figure 6. AC Waveforms
Note:
7. Input=AC Waveform; tr=tf=1.8ns.
8. PRR=10MHz; Duty Cycle=50%.
9. /E Input=GND.
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 6
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
Physical Dimensions
DETAIL A
SCALE: 60X
B
1.90
2.00±0.20
0.50 MIN
1.00
0.80
1.10
0.80
0.10 C
0.25
0.10
0.46
0.26
0.20
GAGE
PLANE (R0.10)
30°
SEATING
PLANE
C0.10
0.00
NOTES: UNLESS OTHERWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO EIAJ
SC-88, 1996.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE BURRS
OR MOLD FLASH.
D) DRAWING FILENAME: MKT-MAA06AREV6
2.10±0.30
0.10 AB
0.65
1.30
(0.25) 0.30
0.15
1
1.25±0.10
3
1.30 0.40 MIN
SEE DETAIL A
LAND PATTERN RECOMMENDATION
6
A
4
C
0.65 L
SYMM
PIN ONE
Figure 7. 6-Lead, SC70, EIAJ SC88, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf.
Package Designator Tape Section Cavity Number Cavity Status Cov er Type Status
P6X Leader (Start End) 125 (Typical) Empty Sealed
Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (Typical) Empty Sealed
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 7
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
Physical Dimensions
2. DIMENSIONS ARE IN MILLIMETERS
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
4. FILENAME AND REVISION: MAC06AREV4
Notes:
3. DRAWING CONFORMS TO ASME Y14.5M-1994
TOP VIE W
RECOMMENED
LAND PATTERN
BOTTOM VI EW
1.45
1.00
A
B0.05 C
0.05 C
2X
2X
0.55MAX
0.05 C
(0.49)
(1)
(0.75)
(0.52)
(0.30)
6X
1X
6X
PIN 1
DETAIL A
0.075 X 45
CHAMFER
0.25
0.15
0.35
0.25
0.40
0.30
0.5
(0.05)
1.0
5X
DETAIL A
PIN 1 TERMINAL
0.40
0.30
0.45
0.35
0.10
0.00
0.10 CBA
0.05 C
C0.05 C
0.05
0.00
5X
5X
6X (0.13)
4X
6X
PIN 1 IDENTIFIER
(0.254)
5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY
5
OTHER LINE IN THE MARK CODE LAYOUT.
Figure 8. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator Tape Section Cavity Number Cavity Status Cov er Type Status
L6X Leader (Start End) 125 (Typical) Empty Sealed
Carrier 5000 Filled Sealed
Trailer (Hub End) 75 (Typical) Empty Sealed
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 8
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer
Physical Dimensions
1.00
B. DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994
NOTES:
A. COMPLIES TO JEDEC MO-252 STANDARD
0.05 CA
B
0.55MAX
0.05 C
C
0.35
0.09
0.19
123
0.35
0.25
5X
6X
DETAIL A
0.60
(0.08)
4X
(0.05) 6X
0.40
0.30
0.075X45°
CHAMFER
5X 0.40
0.35
1X 0.45
6X 0.19
TOP VIEW
BOTTOM VIEW
0.66
0.10 CBA
.05 C
0.89
PIN 1
0.05 C
2X
2X 1.00
D. LANDPATTERN RECOMMENDATION IS BASED ON FSC
E. DRAWING FILENAME AND REVISION: MGF06AREV3
0.52
0.73
0.57
0.20 6X
1X
5X
RECOMMENDED LAND PATTERN
FOR SPACE CONSTRAINED PCB
DETAIL A
PIN 1 LEAD SCALE: 2X
ALTERNATIVE LAND PATTERN
FOR UNIVERSAL APPLICATION
DESIGN.
0.90
MIN 250uM
654
0.35
(0.08) 4X
SIDE VIEW
Figure 9. 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.
Package Designator Tape Section Cavity Number Cavity Status Cov er Type Status
FHX Leader (Start End) 125 (Typical) Empty Sealed
Carrier 5000 Filled Sealed
Trailer (Hub End) 75 (Typical) Empty Sealed
© 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SZ19 • Rev. 1.0.2 9
NC7SZ19 — TinyLogic
®
UHS 1-of-2 Decoder / Demultiplexer