DBLS104G ....... DBLS107G Single Phase 1.0 Amp. Glass Passivated Bridge Rectifiers Dimensions in mm. CASE: THIN DF-S Current 1.0 A Voltage 400 V-1000V 10.3 7.6 8.51 8.13 45 2.6 2.4 6.5 6.2 0.33 0.22 5.2 5 1.53 1.02 0.33 0.076 * Glass passivated junction * Ideal for printed circuit board * Reliable low cost construction utilizing molded plastic technique * High temperature soldering guaranteed: 260 C / 10 seconds / 9.5mm lead length at 5 Ibs., (2.3 Kg) tension * Small size, simple installation Pure tin plated terminal, Lead free. Leads solderable per MIL-STD-202, Method 208 * High surge current capability 1.2 1.02 Maximum Ratings and Electrical Characteristics DBLS 104G 400 DBLS 105G 600 DBLS 106G 800 DBLS 107G 1000 Maximum RMS Voltage (V) 280 420 560 700 Maximum DC Blocking Voltage (V) 400 600 800 1000 VRRM VRMS VDC Maximum Recurrent Peak Reverse Voltage (V) IF(AV) Maximum average Forward Rectified Current @TA = 40 C 1.0 A IFSM Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) 50 A Cj Typical Junction Capacitance 25 pF Rth (j-l) Rth (j-a) Tj Tstg Typical Thermal Resistance (Note 1) 15 C/W 40 C/W Operating Temperature Range -50 to + 150 C Storage Temperature Range -50 to + 150 C Electrical Characteristics at Tamb = 25 C DBLS 104G VF IR DBLS 105G DBLS 106G Max. Instantaneous Forward Voltage @ 1.0A 1.1 V Maximum DC Reverse Current @ TA = 25 C 10 A at Rated DC Blocking Voltage @ TA = 125 C 500 A DBLS 107G Note: 1. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted On P.C.B. with 5 x 5mm Copper Pads. 2. DBLS for Surface Mount Package. Jun - 09 DBLS104G ....... DBLS107G IF(AV), average forward Current (A) MAXIMUM DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 1.0 1.5mm PCB Copper Pauls 13mm x13mm 0.5 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 IR, instantaneous reverse current (A) Rating And Charasterictic Curves TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 Tj = 125 C 10 1 Tj = 25 C 0.1 0.01 0 Tamb, ambient temperature (C) 40 60 80 100 120 140 TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 Cj, junction capacitance (pF) IFSM, peak forward surge current (A) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Tj = 25C Single Sine-wave (JEDEC Method) 50 40 30 20 10 Tj = 25 C f=1.0MHz Vsig=50mVp-p 10 1 0 1 2 4 6 10 20 40 60 100 Number of cycles at 60HZ IF, instantaneous forward current (A) 20 Percent of rated peak reverse voltage (%) 1 10 100 VR, reverse voltage (V) TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 10 1 0.1 0.01 0.4 Tj = 25 C PULSE WIDTH = 300 s 2% DUTY CYCLE 0.6 0.8 1.0 1.2 1.4 1.6 VF, forward voltage (V) Jun - 09