YAGEO CORPORATION SMD INDUCTOR / BEADS
SHAPES AND DIMENSIONS
TYPE A B C D E F G
LS0603 1.8+0 1.25+0 1.02+0 0.38Ref 0.86 0.33 0.76
LS1008 2.92+0 2.79+0 2.20+0 0.70Ref 1.52 0.51 2.03
Wire Wound Ferrite
Chip Inductors
LS Series
Open Type / For High Frequency & Low Loss Applications
LS Series is the latest combo open type ferrite wire wound chip inductor. Thw wire wound ferrite
construction provides higher SRF, lower DCR and superior Q values than other ferrite chip in duc-
tors.
LS - -
PRODUCT IDENTIFICATION
Intemal No.
Tolerance
Inductance
Dimensions
Product Symbol
APPLICATIONS
Telecom and datacom applications such as xDSL,Cable Modem,Set-top Box,CATV filter/
tuner,wireless LAN and so on.
FEATURES
Very strong solderability by reow soldering and soldering iron or wave soldering.
Highly accurate dimensions can be mounted automatically.
Terminals are highly resistant to pull forces.
Highly resistant to mechanical shocks and pressure.
Highly reliable in environments of sudden temperature change and humidity.
Lowest DCR & better Q value in ferrite Series.
Dimensions : mm
Tolerance : J=±5% ; K= ±10%
YAGEO will start to release lead-free that meet
SONY SS-00259's criteria, and Internal No. well
be changed to "N" as identication.
Ex. LS0603-R47 -N
B
A
FEF
GD
C
Terminal
Pad B
B
C
A
Layout
RECOMMENDED PATTERN
TYPE A B C
LS0603 1.02 0.64 0.64
LS1008 2.54 1.02 1.27
105
ELECTRICAL CHARACTERISTICS
PART NO. INDUCTANCE TEST FREQ TOLERANCE Q SRF MIN RDC MAX IDC MAX Color
(nH) (MHz) (±%) TYP- (MHz) (Ω) (mA)
LS0603-R47 -S 470 7.9 10/5 17 800 0.45 1100 Brown
LS0603-1R0 -S 1000 7.9 10/5 18 310 0.81 400 Blue
LS0603-2R2 -S 2200 7.9 10/5 19 250 1.35 500 Black
LS0603-4R7 -S 4700 7.9 10/5 19 95 2.80 400 Yellow
LS0603-6R8 -S 6800 7.9 10/5 19 55 3.30 400 Blue
LS0603-100 -S 10000 7.9 10/5 19 40 4.80 300 White
• Tolerance : J = ±5% , K = ±10%
• Packaging : Clear tape and reel (standard)
• L /Q : Agilent / HP4291A + Agilent / HP 16193A
• SRF : Agilent / HP4291A
• RDC : DIGITAL MULTIMETER SC-7401
• Idc for Inductance drop 10% from its value without current.
• Operating temperature range from -25°C to 85°C
TEST INSTRUMENTS : HP4291A Impedance / Material Analyzer
Typical L vs. Frequency Typical Q vs. Frequency
ELECTRICAL CHARACTERISTICS : LEAD-FREE & ROHS COMPLIANCE
PART NO. INDUCTANCE TEST FREQ Q SRF MIN RDC MAX IDC MAX TOLERANCE Color
(µH) (MHz) TYP- (MHz) (Ω) (mA) (±%)
LS0603-47N -N 0.047 7.9/7.9 17 1700 0.075 1500 5,10 BLK
LS0603-72N -N 0.072 7.9/7.9 17 1700 0.12 1500 5,10 BRN
LS0603-R10 -N 0.1 7.9/7.9 17 1650 0.13 1500 5,10 RED
LS0603-R12 -N 0.12 7.9/7.9 17 1400 0.15 1500 5,10 ORN
LS0603-R15 -N 0.15 7.9/7.9 17 1350 0.15 1450 5,10 YEL
LS0603-R18 -N 0.18 7.9/7.9 17 1350 0.15 1400 5,10 GRN
LS0603-R22 -N 0.22 7.9/7.9 17 1150 0.16 1350 5,10 BLU
LS0603-R24 -N 0.24 7.9/7.9 17 1050 0.19 1300 5,10 VIO
LS0603-R27 -N 0.27 7.9/7.9 17 1050 0.3 1050 5,10 GRY
LS0603-R33 -N 0.33 7.9/7.9 17 850 0.46 1200 5,10 WHT
LS0603-R39 -N 0.39 7.9/7.9 17 810 0.51 1200 5,10 BLK
LS0603-R47 -N 0.47 7.9/7.9 17 720 0.62 1050 5,10 BRN
LS0603-R56 -N 0.56 7.9/7.9 17 600 0.44 850 5,10 RED
LS0603-R68 -N 0.68 7.9/7.9 17 600 0.52 850 5,10 ORN
LS0603-R78 -N 0.78 7.9/7.9 17 460 0.83 850 5,10 YEL
LS0603-R82 -N 0.82 7.9/7.9 17 480 0.69 750 5,10 GRN
LS0603-1R0 -N 1 7.9/7.9 18 310 0.81 600 5,10 BLU
LS0603-1R2 -N 1.2 7.9/7.9 17 270 0.87 550 5,10 VIO
LS0603-1R5 -N 1.5 7.9/7.9 17 270 1.06 540 5,10 GRY
106
PART NO. INDUCTANCE TEST FREQ Q SRF MIN RDC MAX IDC MAX TOLERANCE Color
(µH) (MHz) TYP- (MHz) (Ω) (mA) (±%)
LS0603-1R8 -N 1.8 7.9/7.9 17 230 1.1 520 5,10 WHT
LS0603-2R2 -N 2.2 7.9/7.9 17 150 1.2 500 5,10 BLK
LS0603-2R7 -N 2.7 7.9/7.9 17 105 1.5 480 5,10 BRN
LS0603-3R3 -N 3.3 7.9/7.9 17 84 1.5 440 5,10 RED
LS0603-3R9 -N 3.9 7.9/7.9 17 80 1.6 430 5,10 ORN
LS0603-4R7 -N 4.7 7.9/7.9 18 69 2.1 420 5,10 YEL
LS0603-5R6 -N 5.6 7.9/7.9 18 65 2.6 400 5,10 GRN
LS0603-6R8 -N 6.8 7.9/7.9 19 55 3.1 400 5,10 BLU
LS0603-7R8 -N 7.8 7.9/7.9 17 47 3.5 400 5,10 VIO
LS0603-8R2 -N 8.2 7.9/7.9 17 42 3.6 400 5,10 GRY
LS0603-100 -N 10 7.9/7.9 19 40 4.8 300 5,10 WHT
NOTE: -tolerance J= ±5% / K= ±10% / L= ±15% / M=± 20%
1.Operating temperature range -25°C~85°C
2.L /Q Test OSC @200mV
3. IDC for Inductance drop 10% from its value without current
“N“ FOR Completely lead free type (Including Ferrite Body & Solder )
ELECTRICAL CHARACTERISTICS
PART NO. INDUCTANCE TOLERANCE Q TYP SRF RDC IDC MAX Color Code
(µH) (±%) 7.9MHz 25MHz 50MHZ (MHz)Min. (Ω)Max. (mA) 1ST 2ND 3RD
LS1008-1R2 -S 1.2@7.9MHz 10/5 35 47 55 350 0.50 1200 Brown Red Red
LS1008-1R5 -S 1.5@7.9MHz 10/5 38 53 58 300 0.65 1200 Brown Green Red
LS1008-1R8 -S 1.8@7.9MHz 10/5 34 47 54 280 0.75 1050 Brown Gray Red
LS1008-2R2 -S 2.2@7.9MHz 10/5 34 43 48 250 0.90 950 Red Red Red
LS1008-2R7 -S 2.7@7.9MHz 10/5 38 49 51 200 1.00 950 Red Violet Red
LS1008-3R3 -S 3.3@7.9MHz 10/5 42 57 58 200 1.15 900 Orange Orange Red
LS1008-3R9 -S 3.9@7.9MHz 10/5 37 46 47 170 1.25 850 Orange White Red
LS1008-4R7 -S 4.7@7.9MHz 10/5 37 43 38 130 1.35 700 Yellow Violet Red
LS1008-5R6 -S 5.6@7.9MHz 10/5 36 40 29 110 1.45 700 Green Blue Red
LS1008-6R8 -S 6.8@7.9MHz 10/5 33 39 33 105 1.60 600 Blue Gray Red
LS1008-8R2 -S 8.2@7.9MHz 10/5 40 43 28 90 1.80 550 Gray Red Red
LS1008-100 -S 10.0@7.9MHz 10/5 40 41 25 85 2.40 500 Brown Black Orange
ELECTRICAL CHARACTERISTICS : LEAD-FREE & ROHS COMPLIANCE
PART NO. INDUCTANCE TEST FREQ Q SRF RDC IDC TOLERANCE Color Code
(µH) (MHZ) TYP. (MHz)Min. (Ω)Max. (mA)Max. (±%) IST 2ND 3RD
LS1008-1R2 -N 1.2 7.9/50 55 350 0.5 1200 5,10 BRN RED RED
LS1008-1R5 -N 1.5 7.9/50 58 300 0.65 1200 5,10 BRN GRN RED
LS1008-1R8 -N 1.8 7.9/50 54 280 0.75 1050 5,10 BRN GRY RED
LS1008-2R2 -N 2.2 7.9/50 48 250 0.9 950 5,10 RED RED RED
LS1008-2R7 -N 2.7 7.9/50 51 200 1 950 5,10 RED VIO RED
LS1008-3R3 -N 3.3 7.9/50 58 200 1.15 900 5,10 ORN ORN RED
LS1008-3R9 -N 3.9 7.9/50 37 170 1.25 850 5,10 ORN WHT RED
LS1008-4R7 -N 4.7 7.9/7.9 37 130 1.35 700 5,10 YEL VIO RED
LS1008-5R6 -N 5.6 7.9/7.9 36 110 1.45 700 5,10 GRN BLU RED
LS1008-6R8 -N 6.8 7.9/7.9 33 105 1.6 600 5,10 BLU GRY RED
LS1008-8R2 -N 8.2 7.9/7.9 40 90 1.8 550 5,10 GRY RED RED
LS1008-100 -N 10 7.9/7.9 40 85 2.4 500 5,10 BRN BLK ORN
LS1008-150 -N 15 7.9/7.9 35 40 2.4 450 5,10 BRN GRN ORN
NOTE: -tolerance J= ±5% / K= ±10% /M=± 20%
1.Operating temperature range -25°C~85°C
2.L/Q Test OSC@200mV.
3.IDC for Inductance drop 10% from its value without current
"-N" FOR COMPLETELY LEAD FREE TYPE(INCLUDING FERRITE BODY & SOLDER)
107
TEST INSTRUMENTS : HP4291A IMPEDANCE / MATERIAL ANALYEZER
Typical L vs. Frequency Typical Q vs. Frequency
PACKAGING SPECIFICATIONS
Tape Dimensions Reel Dimensions
TYPE TAPE DIMENSIONS REEL DIMENSIONS Q'TY/REEL
A B T W P F K A B C D
LS0603 1.15 1.83 0.23 8 4 3.5 1.00 178 60 12 1.5 4,000
LS1008 2.70 2.95 0.23 8 4 3.5 2.25 178 60 12 1.5 2,000
Dimensions : mm
4
.
0
±
0
.
1
T2.0 ± 0.05
W
F
1
.
75
±
0
.
1
KPA
T
rai
l
e
r
Blank part(160mm min.)
C
Blank Compartments with Cover Tape
and Leader (330mm min.)
B
1.5 +0.1/-0.0
c
D
B
D: 21±0.5
D: 13±0.5
2±0.5
A
108
temperature °C
time:second
pre-heating
60 second
120 second 80 second
5~10 second
soldering natural cooling
230 °C
150 °C
RECOMMEND SOLDERING CONDITIONS
for:CS/ CT/ LCN/ HC/ HQ/ CMM/ NL (open type)/ NLC (open type)/ LS
