MURB1660CTG, MURB1660CTT4G, NRVUB1660CTT4G
http://onsemi.com
2
MAXIMUM RATINGS (Per Leg)
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
600 V
Average Rectified Forward Current
(Rated VR, TC = 150C) Total Device
IF(AV) 8.0
16
A
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz, TC = 150C)
IFM 16
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
IFSM 100
A
Operating Junction and Storage Temperature Range TJ, Tstg −65 to +175 C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
THERMAL CHARACTERISTICS (Per Leg)
Rating Symbol Value Unit
Maximum Thermal Resistance, Junction−to−Case RqJC 2.0 C/W
Maximum Thermal Resistance, Junction−to−Ambient (Note 1) RqJA 50 C/W
Temperature for Soldering Purposes: 1/8 from Case for 5 Seconds TL260 C
1. See Chapter 7 for mounting conditions.
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic Symbol Max Unit
Maximum Instantaneous Forward Voltage (Note 2)
(iF = 8.0 Amp, TC = 150C)
(iF = 8.0 Amp, TC = 25C)
vF1.20
1.50
V
Maximum Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, TC = 150C)
(Rated dc Voltage, TC = 25C)
iR500
10
mA
Maximum Reverse Recovery Time
(IF = 1.0 Amp, di/dt = 50 Amp/ms)
(IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp)
trr 60
50
ns
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%.
VR, REVERSE VOLTAGE (V)
IR, REVERSE CURRENT (A)
0.01
0.04
0.4
2.0
10
40
400
1.0 K
600500400300200100
100
50
20
, INSTANTANEOUS FORWARD CURRENT (AMPS)
iF
10
5.0
2.0
1.0
0.1 0.4 0.6 1 1.2 1.6 1.8
vF, INSTANTANEOUS VOLTAGE (V)
0.3
100C
25C
TJ = 150C
0.8 1.4
100C
TJ = 150C
25C100
0.1
1.0
10 K
Figure 1. Typical Forward Voltage, Per Leg Figure 2. Typical Reverse Current, Per Leg