95 95 Cable Shear not suitable for steel wire and hard drawn copper conductors precision ground, hardened blades no crushing, slight deformation of the cable only with guard adjustable screw joint 95 05 165 95 06 230 Article-No. 9 EANLength mm 95 05 165 95 06 230 9 Head 9 Handles 9 Cutting Capacity Code 4003773- 019596 006305 bright polished bright polished with plastic handles plastic insulated VDE-tested 95 o mm 10 16 mm2 24 50 AWG 3 1 g 115 275 Model 95 05 165: cable shears for universal use; cuts cables up to 10 mm dia. / 24 mm2 with opening spring and locking lever blades made of stainless steel oil-hardened and tempered Model 95 06 230: for copper conductors single wire up to 16 mm2, multiple wire up to 50 mm2, fine strand up to 70 mm2 and aluminium conductors multiple wire up to 70 mm2 easy cutting with one-hand operation due to high transmission ratio stainless - special grade - steel, oil hardened and tempered VDE tested according to DIN EN/IEC 60900 95 Cable Shears for cutting copper and aluminium cables, single and multiple wire not suitable for steel wire and hard drawn copper conductors precision ground, hardened blades clean and smooth cut without crushing and deformation easy cutting with one-hand operation with guard adjustable screw joint, self-locking forged Vanadium steel, oil-hardned and tempered 95 11 165 95 12 165 Model 95 11/12 165: universal use for dismantling and stripping Cut performed with a Diagonal Cutter: high effort required, inaccurate cut, considerable deforming and crushing of the cable 95 16 165 Article-No. 9 EANLength mm 9 Head 9 Cutting capacity Code 4003773- 95 11 165 95 12 165 029175 029182 burnished burnished 95 16 165 039648 chrome plated 92 9 Handles plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE-tested o mm 15 15 mm2 50 50 AWG 1/0 1/0 g 210 245 15 50 1/0 255 Cut effected with a Cable Shear: easy, clean cut without any deformation of the cable