W005G thru W10G Vishay Semiconductors formerly General Semiconductor Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage 50 and 1000V Forward Current 1.5A Case Style WOG Features 0.388 (9.86) 0.348 (8.84) * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * This series is UL listed under the Recognized Component Index, file number E54214 * Glass passivated chip junction * High case dielectric strength * Typical IR less than 0.1A * High overload surge current * Ideal for printed circuit boards * High temperature soldering guaranteed: 260C/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3kg) tension 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. Dimensions in inches and (millimeters) 0.032 (0.81) 0.060 (1.52) 0.028 (0.71) 0.020 (0.51) Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.04 oz., 1.1 g Packaging codes/options: 1/100 EA. per Bulk Bag 0.220 (5.6) 0.348 (8.84) 0.180 (4.6) 0.308 (7.82) 0.220 (5.6) 0.180 (4.6) Maximum Ratings & Thermal Characteristics Parameter Ratings at 25C ambient temperature unless otherwise specified. Symbols W005G W01G W02G W04G W06G W08G W10G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at 0.375" (9.5mm) lead length at TA=25C IF(AV) 1.5 A Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A I2t 10 A2sec RJA RJL 36 11 C/W TJ -55 to +150 C TSTG -55 to +150 C Rating for fusing (t<8.3ms) Typical thermal resistance per leg (1) Operating junction temperature range Storage temperature range Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Parameter Symbols W005G W01G W02G W04G W06G W08G W10G Units Maximum instantaneous forward voltage drop per leg at 1.0A VF 1.0 V Maximum DC reverse current at rated TA=25C DC blocking voltage per leg TA=125C IR 5.0 500 A Typical junction capacitance per leg at 4.0V, 1MHz CJ 14 pF Notes: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length P.C.B. mounting Document Number 88769 19-Feb-02 www.vishay.com 1 W005G thru W10G Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 1 -- Derating Curve Output Rectified Current 60 1.4 1.2 0.375" (9.5mm) P.C.B. 1.0 Copper Pads 0.22 x 0.22" (5.5 x 5.5mm) 0.8 0.6 0.4 0.2 0 20 Capacitive Load I(pk) 5.0 = 10 I(AV) 20 Peak Forward Surge Current (A) Average Forward Output Current (A) 1.6 60 HZ Resistive or Inductive Load Fig. 2 -- Maximum Non-Repetitive Peak Forward Surge Current Per Leg TA = 25C Single Sine-Wave (JEDEC Method) 50 40 30 20 10 1.0 Cycle 0 60 40 10 1 140 150 120 100 80 Ambient Temperature (C) Number of Cycles at 60 HZ Fig. 3 -- Typical Forward Characteristics Per Leg Fig. 4 -- Typical Reverse Leakage Characteristics Per Leg 50 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) 20 10 TJ = 25C Pulse Width = 300s 1% Duty Cycle 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 TJ = 100C 1 0.1 TJ = 25C 0.01 1.6 1.4 10 0 Instantaneous Forward Voltage (V) 60 80 100 100 TJ = 25C f = 1.0MHZ Vsig = 50mVp-p 10 1 10 Reverse Voltage (V) 100 Transient Thermal Impedance (C/W) Junction Capacitance (pF) 40 Fig. 6 -- Typical Transient Thermal Impedance 100 www.vishay.com 2 20 Percent of Rated Peak Reverse Voltage (%) Fig. 5 -- Typical Junction Capacitance Per Leg 1 0.1 100 10 1 0.1 0.01 0.1 1 10 100 t, Heating Time (sec.) Document Number 88769 19-Feb-02