W005G thru W10G
Vishay Semiconductors
for merly General Semiconductor
Document Number 88769 www.vishay.com
19-Feb-02 1
Glass Passivated Single-Phase
Bridge Rectifier Rever se V oltage 50 and 1000V
Forward Current 1.5A
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbols W005G W01G W02G W04G W06G W08G W10G Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current at
0.375" (9.5mm) lead length at TA=25°C IF(AV) 1.5 A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method) IFSM 50 A
Rating for fusing (t<8.3ms) I2t10A
2sec
Typical ther mal resistance per leg (1) RΘJA 36 °C/W
RΘJL 11
Operating junction temperature range TJ-55 to +150 °C
Storage temperature range TSTG -55 to +150 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbols W005G W01G W02G W04G W06G W08G W10G Units
Maximum instantaneous forward voltage drop
per leg at 1.0A VF1.0 V
Maximum DC reverse current at rated TA=25°C 5.0
DC blocking voltage per leg TA=125°C IR500 µA
Typical junction capacitance per leg at 4.0V, 1MHz CJ14 pF
Notes: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length P.C.B. mounting
0.220 (5.6)
0.160 (4.1)
0.388 (9.86)
0.348 (8.84)
0.032 (0.81)
0.028 (0.71)
1.0
(25.4)
MIN.
0.060 (1.52)
0.020 (0.51)
0.348 (8.84)
0.308 (7.82)
0.220 (5.6)
0.180 (4.6)
0.220 (5.6)
0.180 (4.6)
Dimensions in inches
and (millimeters)
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This ser ies is UL listed under the Recognized
Component Index, file number E54214
• Glass passivated chip junction
• High case dielectric strength
• Typical IRless than 0.1µA
• High overload surge current
• Ideal for pr inted circuit boards
• High temperature soldering guaranteed:
260°C/10 seconds, 0.375 (9.5mm) lead length,
5lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any
Weight: 0.04 oz., 1.1 g
Packaging codes/options: 1/100 EA. per Bulk Bag
Case Style WOG
W005G thru W10G
Vishay Semiconductors
for merly General Semiconductor
www.vishay.com Document Number 88769
219-Feb-02
Ratings and
Characteristic Curves(TA= 25°C unless otherwise noted)
Ambient Temperature (°C)
Fig. 1 — Derating Curve
Output Rectified Current
Average Forward Output Current (A)
Fig. 3 — Typical Forward
Characteristics Per Leg
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
Fig. 4 — Typical Reverse Leakage
Characteristics Per Leg
Fig. 6 — Typical Transient
Thermal Impedance
Number of Cycles at 60 HZ
t, Heating Time (sec.)
Fig. 2 — Maximum Non-Repetitive
Peak Forward Surge Current Per Leg
Peak Forward Surge Current (A)
Reverse Voltage (V)
Junction Capacitance (pF)
Transient Thermal Impedance (°C/W)
Fig. 5 — Typical Junction
Capacitance Per Leg
20 40 60 80 100 120 140
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
150
Capacitive Load
5.0
10
20
=
I(pk)
I(AV)
1
0
10
40
50
60
30
20
10 100
TA = 25°C
Single Sine-Wave
(JEDEC Method)
1.0 Cycle
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1
10
20
T
J
= 25°C
Pulse Width = 300µs
1% Duty Cycle
020 40 60 80 100
0.01
0.1
1
10
50
0.1 110 100
1
10
100
TJ = 25°C
f = 1.0MHZ
Vsig = 50mVp-p
0.1
0.01 110 100
1
10
100
0.1
TJ = 100°C
TJ = 25°C
P.C.B.
0.375"
(9.5mm)
Copper Pads
0.22 x 0.22"
(5.5 x 5.5mm)
60 HZ
Resistive or
Inductive Load
