MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified * * * * * * * * * * * Features: Resistive Product Solutions Thin film technology for precision and stability Excellent power to size ratio Outstanding pulse handling Excellent overall stability Sn termination on Ni barrier layer Tight tolerance down to 0.1% Extremely low TCR down to 15ppm/C High power rating up to 1 Watt SMD enabled structure AEC-Q200 qualified RoHS compliant, lead-free and halogen-free Electrical Specifications Type/Code Package Size MLFA13(3) Power Rating (Watts) @ 70C 0102 0.3W Maximum Working Maximum Overload (1) (2) Voltage Voltage 200V 400V Resistance Temperature Coefficient 0.1% 50 ppm/C - 100 ppm/C 0204 10 - 300K 25 ppm/C 0.4W 200V 400V 50 ppm/C 10 - 1M 10 - 1M 1 - 1M 350V 700V 0.2 - 1M - 0.1 - 1M - 0 (<15m) 15 ppm/C 10 - 300K 25 ppm/C 1W 50 ppm/C 10 - 1M 10 - 1M 100 ppm/C Jumper: 4A 5% 8.2 - 1M 15 ppm/C 100 ppm/C 0207 1% 8.2 - 1M 0 (<15m) Jumper: 2A MLFA1 0.5% - Jumper: 2A MLFA25 Ohmic Range () and Tolerance 1 - 1M 0.2 - 1M - 0.1 - 1M 0 (<15m) - Working Voltage = (P*R) or Max. Operating Voltage listed above, whichever is lower. Overload Voltage = 2.5*(P*R) or Max. Overload Voltage listed above, whichever is lower. (3) Lower TCR with lower Power Ratings may be available - contact factory RCWV (Rated Continuous Working Voltage) = (P*R) or Max Operating Voltage, whichever is lower. (1) (2) Mechanical Specifications L Body Length 0.087 0.004 2.20 0.10 D Body Diameter 0.043 0.004 1.10 0.10 K Termination 0.018 0.002 0.45 0.05 inches mm 18.7 0.138 0.008 3.50 0.20 0.055 0.006 1.40 0.15 0.031 0.004 0.80 0.10 inches mm 80.9 0.232 0.008 5.90 0.20 0.087 0.008 2.20 0.20 0.051 0.004 1.30 0.10 inches mm Type / Code Weight (1000 pc) (g) MLFA13 7.7 MLFA25 MLFA1 Unit Operating Temperature Range: -55 ~ +155C Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 1 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Power Derating Curve: 100 Resistive Product Solutions -55C 70C 80 60 40 20 155C 0 -60 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) Performance Characteristics Test Test Method Biased Humidity JIS-C-5201-1 4.8 IEC-60115-1 4.8 -55C ~ +125C, 25C is the reference temperature JIS-C-5201-1 4.13 IEC-60115-1 4.13 RCWV*2.5 or max. overload voltage whichever is lower for 5 seconds JIS-C-5201-1 4.6 IEC-60115-1 4.6 Max. overload voltage for 1 minute JIS-C-5201-1 4.25 IEC-60115-1 4.25.1 702C, RCWV for 1000 hours with 1.5 hour "ON" and 0.5 hour "OFF" MIL-STD-202 Method 103 1000 hours 85C/85% RH 10% of operating power High Temperature Exposure MIL-STD-202 Method 108 at +155C for 1000 hours Board Flex AEC-Q200-005 Bending once for 60 seconds with 2mm Temperature Coefficient of Resistance (T.C.R.) Short Time Overload Insulation Resistance Endurance JIS-C-5201-1 4.17 IEC-60115-1 4.17 J-STD-002 2455C for 3 seconds MIL-STD-202 Method 210 2605C for 10 seconds Solderability Resistance to Soldering Heat Voltage Proof JIS-C-5201-1 4.7 IEC-60115-1 4.7 1.42 times max. operating voltage for 1 minute Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 2 Test Specification As specified 10-270K:(0.1%+0.05) <10&>270K:(0.15%+0.05) MLFA13: (0.15%+0.05) 10G 10-270K:(0.25%+0.05) <10&>270K:(0.5%+0.05) MLFA13: (0.5%+0.05) 10-270K:(0.5%+0.05) <10&>270K:(1%+0.05) MLFA13: (2%+0.05) 10-270K:(0.25%+0.05) <10&>270K:(0.5%+0.05) MLFA13: (1%+0.05) 10-270K:(0.1%+0.05) <10&>270K:(0.5%+0.05) MLFA13: (0.5%+0.05) 95% min. coverage 10-270K:(0.1%+0.05) <10&>270K:(0.25%+0.05) MLFA13: (0.25%+0.05) No breakdown or flashover www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions Performance Characteristics (cont.) Test Test Method Test Specification JIS-C-5201-1 4.18 IEC-60068-2-58 8.2.1 2605C for 30 seconds JESD22 Method JA-104 -55C to +125C, 1000 cycles Leaching Temperature Cycling Individual leaching area 5% Total leaching area 10% 10-270K:(0.25%+0.05) <10&>270K:(0.5%+0.05) MLFA13: (1%+0.05) MIL-STD-202 Method 213 (0.25%+0.05) Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. MIL-STD-202 Method 204 Vibration (0.5%+0.05) 5 g's for 20 minutes., 12 cycles each of 3 orientations, 10-2000 Hz AEC-Q200-002 ESD (0.5%+0.05) Human body, 2KV MIL-STD-202 Method 215 No visible damage on appearance Resistance to Solvents Add aqueous wash chemical - OKEM clean or and marking. equivalent. Do not use banned solvents. AEC-Q200-006 Terminal Strength No breakage Force of 1.8 Kg for 60 seconds No ignition of the tissue paper or UL-94 Flammability scorching of the pinewood board V-0 or V-1 are acceptable. Electrical test not required. RCWV (rated continuous working voltage) = (P*R) or max. operating voltage whichever is lower. Storage temperature: 15~28 C. Humidity < 80% R.H. Mechanical Shock Reel Specifications Type / Code MLFA13 MLFA25 MLFA1 oA Reel Diameter 0.276 7.00 0.276 7.00 0.276 7.00 7.028 178.50 7.028 178.50 7.028 178.50 oB 0.059 1.50 0.059 1.50 0.059 1.50 2.362 60.00 2.362 60.00 2.362 60.00 Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. oC 0.039 1.00 0.039 1.00 0.039 1.00 3 0.512 13.00 0.512 13.00 0.512 13.00 T W 0.008 0.20 0.008 0.20 0.020 0.50 0.354 9.00 0.354 9.00 0.512 13.00 0.020 0.50 0.020 0.50 0.020 0.50 0.492 12.50 0.492 12.50 0.610 15.50 Unit 0.020 0.50 0.020 0.50 0.020 0.50 inches mm inches mm inches mm www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions Packaging Specifications - Embossed Plastic Tape Type / Code MLFA13 MLFA25 MLFA1 A MLFA25 MLFA1 W E 0.004 0.10 0.004 0.10 0.004 0.10 P1 0.094 2.40 0.144 3.65 0.242 6.15 0.004 0.10 0.004 0.10 0.004 0.10 P2 0.315 8.00 0.315 8.00 0.472 12.00 0.004 0.10 0.004 0.10 0.004 0.10 D0 0.157 4.00 0.157 4.00 0.157 4.00 0.079 2.00 0.079 2.00 0.079 2.00 0.059 1.50 0.059 1.50 0.059 1.50 Type / Code MLFA13 B 0.051 1.30 0.061 1.55 0.094 2.40 0.004 0.10 0.004 0.10 0.004 0.10 0.002 0.05 0.002 0.05 0.002 0.05 0.004 0.10 0.004 0.10 0.004 0.10 0.069 1.75 0.069 1.75 0.069 1.75 F 0.004 0.10 0.004 0.10 0.004 0.10 D1 0.035 0.90 0.035 0.90 0.055 1.40 min. min. min. min. min. min. P0 0.138 3.50 0.138 3.50 0.217 5.50 T 0.002 0.05 0.002 0.05 0.002 0.05 0.059 1.50 0.071 1.80 0.106 2.70 0.004 0.10 0.004 0.10 0.004 0.10 0.157 4.00 0.157 4.00 0.157 4.00 Unit Unit 0.004 0.10 0.004 0.10 0.004 0.10 inches mm inches mm inches mm inches mm inches mm inches mm Recommended Pad Layout Type / Code MLFA13 MLFA25 MLFA1 A 0.039 1.00 0.063 1.60 0.118 3.00 Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. B 0.031 0.80 0.047 1.20 0.067 1.70 4 C 0.059 1.50 0.063 1.60 0.094 2.40 Unit inches mm inches mm inches mm www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions Soldering Condition: (1) Time of IR reflow soldering at maximum temperature point 260C : 10s (2) Time of wave soldering at maximum temperature point 260C : 10s (3) Time of soldering iron at maximum temperature point 410C : 5s Pulse Withstanding Capacity The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown. MLFA13 Single Pulse Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 5 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions MLFA25/MLFA1 Single Pulse (100 Ohm) Continuous Pulse The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value. MLFA13 Continuous Pulse Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 6 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions MLFA13 Pulse Voltage (100 Ohm) MLFA25/MLFA1 Continuous Pulse (100 Ohm) Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 7 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions MLFA25/MLFA1 Pulse Voltage (100 Ohm) Frequency Behavior Resistors are designed to function according to Ohmic laws. This is basically true of resistors for frequencies up to 100 kHz. At higher frequencies, there is an additional contribution to the impedance by an ideal resistor switched in series with a coil and both switched parallel to a capacitor. The values of the capacitance and inductance are mainly determined by the dimensions of the terminations and the conductive path length. The environment surrounding components has a large influence on the behavior of the component on the printed-circuit board. MLFA25 Frequency versus Impedance Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 8 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions MLFA25 Frequency versus Phase Angle MLFA1 Frequency versus Impedance Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 9 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions MLFA1 Frequency versus Phase Angle Lightning Surge Resistors are tested in accordance with IEC 60 115-1 using both 1.2/50s and 10/700s pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value. MLFA13 1.2/50s Lightning Surge Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 10 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions MLFA13 10/700s Lightning Surge MLFA25/MLFA1 1.2/50s Lightning Surge Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 11 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions 10/700s Lightning Surge RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union's directive regarding "Restrictions on Hazardous Substances" (RoHS 2). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament. RoHS Compliance Status Standard Product Series MLFA Description Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) Metal Film Melf Resistor (AEC-Q200 Qualified) SMD YES 100% Matte Sn Always Always Conflict Metals" Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the "conflict region" of the Eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 12 www.seielect.com marketing@seielect.com MLFA Series Stackpole Electronics, Inc. Metal Film Melf Resistor - AEC-Q200 Qualified Resistive Product Solutions Compliance to "REACH" We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, "The Registration, Evaluation, Authorization and Restriction of Chemicals", otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order 1 2 3 4 5 6 7 8 10 11 12 13 14 M L F A 2 5 F T S 1 0 0 K Product Series MLFA Power Rating Power Code Size 13 0102 0.3W 25 0204 0.4W 1 0207 1W Tolerance Code Tol Value B 0.1% E96, E24 D 0.5% F 1% J 5% E24 Z Jumper Rev Date: 04/11/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. Code T 13 Packaging Description Product Code MLFA13 7" Reel MLFA25 Plastic Tape MLFA1 Quantity 3,000 2,000 TCR Code ppm Z jumper S 15 E 25 C 50 D 100 Resistance Value Four characters with the multiplier used as the decimal holder. 1 ohm = 1R00 100 Kohm = 100K 1 Mohm = 1M00 zero ohm jumper = 0R00 www.seielect.com marketing@seielect.com