HD74HC4060 14-stage Binary Counter Description The HD74HC4060 is a 14 stage counter, this device increments on the falling edge (negative transition) of the input clock, and all their outputs are reset to a low level by applying a logical high on their reset input. The HD74HC4060 also has two additional inputs to enable easy connection of either an RC or crystal oscillator. Features * * * * * High Speed Operation: tpd (Clock to Q4) = 41.5 ns typ (C L = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C) Function Table Clock in X X : Irrelevant Reset Outputs State L No change L Advance to next state H All outputs are low HD74HC4060 Pin Arrangement 16 VCC Q12 1 Q12 Q13 2 Q13 Q10 15 Q10 Q14 3 Q14 Q8 14 Q8 Q6 4 Q6 Q9 13 Q9 Q5 5 Q5 Reset Q7 6 Q7 Clock in Q4 7 Q4 Clock out 1 Clock out 2 12 Reset 11 Clock in 10 Clock out 1 GND 8 9 Clock out 2 (Top view) Block Diagram Clock out 2 Clock out 1 Clock in C Q C Q C Q C Q C Q C C Q C Q C Q C Q C Q C R R R R R Q R Q Reset Q5 Q4 Q Q Q14 2 R C Q C Q Q13 R C Q C Q Q12 R C Q C Q R C Q C Q Q10 R C Q C Q Q9 R C Q C Q Q8 R Q6 C Q C Q Q7 R C C HD74HC4060 Timing Diagram Clock in 1 2 4 8 16 32 64 128 256 512 1,024 2,048 4,096 8,192 16,384 Reset Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q10 Q11 Q12 Q13 Q14 3 HD74HC4060 DC Characteristics Ta = -40 to +85C Ta = 25C Item Symbol VCC (V) Min Typ Max Min Max Unit Input voltage VIH 2.0 1.5 -- -- 1.5 -- V 4.5 3.15 -- -- 3.15 -- 6.0 4.2 -- -- 4.2 -- 2.0 -- -- 0.5 -- 0.5 4.5 -- -- 1.35 -- 1.35 6.0 -- -- 1.8 -- 1.8 2.0 1.9 2.0 -- 1.9 -- 4.5 4.4 4.5 -- 4.4 -- 6.0 5.9 6.0 -- 5.9 -- 4.5 4.18 -- -- 4.13 -- I OH = -4 mA 6.0 5.68 -- -- 5.63 -- I OH = -5.2 mA 2.0 -- 0.0 0.1 -- 0.1 4.5 -- 0.0 0.1 -- 0.1 6.0 -- 0.0 0.1 -- 0.1 4.5 -- -- 0.26 -- 0.33 I OL = 4 mA 6.0 -- -- 0.26 -- 0.33 I OL = 5.2 mA VIL Output voltage VOH VOL Test Conditions V V V Vin = VIH or VIL I OH = -20 A Vin = VIH or VIL I OL = 20 A Input current Iin 6.0 -- -- 0.1 -- 1.0 A Vin = VCC or GND Quiescent supply current I CC 6.0 -- -- 4.0 40 A Vin = VCC or GND, Iout = 0 A 4 -- HD74HC4060 AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Ta = -40 to +85C Ta = 25C Item Symbol VCC (V) Min Typ Max Min Max Unit Maximum clock f max 2.0 -- -- 4 -- 3 MHz 4.5 -- -- 20 -- 16 6.0 -- -- 24 -- 19 Propagation delay t PLH 2.0 -- -- 300 -- 375 time 4.5 -- 42 60 -- 75 6.0 -- -- 51 -- 63 2.0 -- -- 300 -- 375 4.5 -- 41 60 -- 75 6.0 -- -- 51 -- 63 2.0 -- -- 240 -- 300 4.5 -- 16 48 -- 60 6.0 -- -- 41 -- 51 2.0 100 -- -- 125 -- 4.5 20 10 -- 25 -- 6.0 17 -- -- 21 -- 2.0 80 -- -- 100 -- 4.5 16 7 -- 20 -- 6.0 14 -- -- 17 -- frequency t PHL t PHL Removal time Pulse width t rem tw Output rise/fall t TLH 2.0 -- -- 75 -- 95 time t THL 4.5 -- 5 15 -- 19 6.0 -- -- 13 -- 16 -- -- 5 10 -- 10 Input capacitance Cin Test Conditions ns Clock to Q4 ns Clock to Q4 ns Reset to output ns ns ns pF 5 Unit: mm 19.20 20.00 Max 1 7.40 Max 9 6.30 16 8 1.3 0.48 0.10 2.54 Min 5.06 Max 2.54 0.25 0.51 Min 1.11 Max 7.62 + 0.13 0.25 - 0.05 0 - 15 Hitachi Code JEDEC EIAJ Weight (reference value) DP-16 Conforms Conforms 1.07 g Unit: mm 10.06 10.5 Max 9 1 8 1.27 *0.42 0.08 0.40 0.06 0.10 0.10 0.80 Max *0.22 0.05 0.20 0.04 2.20 Max 5.5 16 0.20 7.80 +- 0.30 1.15 0 - 8 0.70 0.20 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) FP-16DA -- Conforms 0.24 g Unit: mm 9.9 10.3 Max 9 1 8 0.635 Max *0.42 0.08 0.40 0.06 0.15 *0.22 0.03 0.20 0.03 1.27 0.11 0.14 +- 0.04 1.75 Max 3.95 16 0.10 6.10 +- 0.30 1.08 0 - 8 0.67 0.60 +- 0.20 0.25 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) FP-16DN Conforms Conforms 0.15 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.