Commercial Chip - X7R 16Vdc to 10kVdc Standard EIA case sizes and available C/V values are listed below - special sizes, thicknesses and other voltage ratings are available; please contact the sales office for information. A range of commercial MLC chip capacitors in Stable EIA Class II dielectric. Class II X7R chips are used as decoupling, by-pass, filtering and transient voltage suppression elements and exhibit +/-15% temperature coefficient and predictable variation of electrical properties with time, temperature and voltage. Designed for surface mount application with nickel barrier terminations making them suitable for solder wave and reflow solder board attachment as well as vapor phase attachment for part sizes 2225 or smaller. Silver-palladium terminations are also available for hybrid use with conductive epoxy. Capacitance and voltage selection for popular chip sizes Size 0402 0504 0603 0805 1005 1206 1210 1515 1808 1812 1825 Min cap. 121 121 121 121 121 121 121 151 151 151 151 151 471 471 Tmax 0. 024 0.61 0.044 1.12 0.035 0.89 0.054 1.37 0.054 1.37 0.064 1.63 0.065 1.63 0.130 3.02 0.065 1.63 0.080* 2.03 0.065 1.63 0.100* 2.54 0.080 2.03 0.140* 3.56 16V 562 393 273 124 154 334 474 125 684 824 125 155 185 225 25V 472 333 223 104 124 274 474 105 564 564 105 125 155 225 50V 472 333 223 104 124 274 474 824 394 564 824 125 155 225 100V 472 333 223 683 823 184 334 684 274 394 564 824 125 185 200V 222 153 103 333 473 104 184 564 184 224 334 564 824 155 250V 152 103 682 273 393 683 124 394 124 154 224 394 684 125 300V * * * 153 183 473 823 274 823 104 154 224 474 824 400V * * * 123 123 273 563 224 563 823 104 184 334 564 500V * * * 123 822 223 563 154 563 683 104 154 334 474 600V * * * 822 822 183 393 124 393 563 683 124 224 394 800V * * * 472 472 103 273 823 273 333 473 683 124 274 1kV * * * 272 272 682 153 563 153 223 273 473 823 154 1.5kV * * * * * 222 472 183 472 682 822 153 273 563 2kV * * * * * 102 222 822 272 332 472 682 123 273 3kV * * * * * * * 152 561 821 122 122 472 103 4kV * * * * * * * 122 331 391 681 122 152 272 5kV * * * * * * * * * * * * 821 182 6kV * * * * * * * * * * * * * * 7kV * * * * * * * * * * * * * * 8kV * * * * * * * * * * * * * * 9kV * * * * * * * * * * * * * 10kV * * * * * * * * * * * * * inches: mm: * Units rated above 800V may require conformal coating to preclude arcing over chip surface 20 Phone: +1.661.295.5920 | www.novacap.com Commercial Chip - X7R 16Vdc to 10kVdc l For dielectric characteristics see page 6. l For dimensions see page 12. l For termination options see pages 3 & 15. l For capacitance tolerances available see page 15. l For ordering information see page 15. Note: Maximum capacitance values are shown below as 3 digit code: 2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF. Capacitance and voltage selection for popular chip sizes 2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size Min cap. 471 471 471 471 102 102 102 102 102 102 102 222 222 0.180 4.57 0.080 2.03 0.080 2.03 0.150* 3.81 0.180 4.57 0.250 6.35 0.250 6.35 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 185 155 225 275 355 525 525 825 905 106 126 206 256 16V 155 125 185 225 325 505 505 755 805 106 106 186 226 25V 155 125 185 225 325 425 425 705 755 905 106 156 206 50V 155 125 155 225 275 405 405 625 685 825 905 126 186 100V 125 684 105 185 225 355 355 565 625 705 825 106 156 200V 105 564 824 155 185 325 325 505 605 685 805 825 126 250V 824 394 474 105 125 225 225 475 505 575 705 755 106 300V 564 274 394 684 824 125 125 255 275 305 375 545 875 400V 474 274 334 564 684 105 105 185 185 185 225 335 475 500V 274 224 274 474 394 684 684 155 155 155 225 275 395 600V 224 124 154 334 274 474 394 684 824 105 155 225 275 800V 154 823 104 224 184 334 334 564 684 684 105 155 185 1kV 393 273 333 683 563 124 124 274 334 344 474 684 824 1.5kV 273 123 153 333 273 823 683 154 184 184 274 394 474 2kV 103 472 562 123 822 333 273 683 683 823 124 184 224 3kV 272 152 152 332 472 183 153 223 333 393 473 823 104 4kV 152 821 102 222 272 123 103 123 183 223 333 473 563 5kV * * * * * 682 562 822 123 153 223 333 393 6kV * * * * * * 472 562 822 103 153 223 273 7kV * * * * * * 332 472 682 822 123 153 223 8kV * * * * * * 272 332 472 562 103 123 183 9kV * * * * * * 182 272 392 472 682 103 123 10kV :inches :mm Tmax * Denotes non standard chip thickness. Order code needs to have an 'X' inserted together with the dimension in inches e.g. X080 where dimension is 0.080" Phone: +1.661.295.5920 | www.novacap.com 21 Case Size Dielectric Capacitance Capacitance Tolerance Voltage Termination Special Thickness High Reliability Testing Packaging Marking XX 1206 N 472 J 101 N X050 H T M High Reliability Test Criteria Prefix Chip Ordering Information - HB Capacitance Code 1st two digits are significant, third digit denotes number of zeros, R = decimal Examples: 1R0 = 1.0pF Special Thickness Packaging Marking 120 = 12pF None None None 471 = 470pF X 102 = 1,000pF 273 = 0.027F 474 = 0.47F 105 = 1.0F Standard thickness as per Novacap catalog specifications Denotes a special thickness other than standard. Specify in inches if required. (As shown above X = 0.050") Bulk T Tape and Reel W Waffle Pack None Standard product N C0G/NP0 Ultra Stable M C0G/NP0 Ultra Stable Magnetic Free F C0G/NP0 High Temp. (up to 160C) D C0G/NP0 High Temp. (up to 200C) Voltage Code K R3L Ultra Stable R R2D Pulse Energy Y Y5V General Purpose 1st two digits are significant, third digit denotes number of zeros. For example: Z Z5U General Purpose B X7R Stable C X7R Stable Magnetic Free X BX MIL S X8R High Temp. (up to 150C) E Class II High Temp. (up to 200C) G Class II High Temp. (up to 160C) W X5R Stable P Positive VTC Pulse Power RN NP0 RoHS 2013 < 200V RB X7R RoHS 2013 < 200V Unmarked Marked *Marking not available on sizes < 0603 High Reliability Testing Dielectric Codes M H High Reliability Testing H High Temp Screening { Hi-Reliability Testing Criteria HB MIL-PRF-55681 Group A HK MIL-PRF-38534 Class K HS MIL-PRF-123 Group A Termination Codes 160 = 16 Volts 101 = 100 Volts 501 = 500 Volts 102 = 502 = 103 = P Palladium Silver PR Palladium Silver* K Solderable Palladium Silver* N Nickel Barrier* 100% tin Y Nickel Barrier 90% tin, 10% lead NG Nickel Barrier Gold Flash* C FlexiCapTM/Nickel Barrier* D FlexiCapTM/Nickel Barrier 90% tin, 10% lead 1,000 Volts B Copper Barrier* 100% tin 5,000 Volts E Copper Barrier 90% tin, 10% lead 10,000 Volts S Silver* 100% tin * Indicates RoHS terminations Capacitance Tolerance Codes Code Tolerance N M B 0.10pF * * Prefix Definitions C 0.25pF * * None D 0.50pF * * Cap. Value < 10pF * Not RF series Standard chip Y5V R3L R2D Z5U C0G/NP0 F/D K R Y/Z X7R BX X8R B C X S Positive Class X5R VTC II E/G W P * * RF Improved ESR Capacitor p. 23 F 1% * * * LS Y3 Certified Safety Capacitor p. 42 - 43 G 2% * * * * ES Y Certified Safety Capacitor p. 42 - 43 J 5% * * * * * ** * ** * * ST Stacked Capacitor Assembly p. 48 - 53 K 10% * * * * * * * * * * * * SM Stacked Hi-Rel Capacitor Assembly p. 48 - 53 M 20% * * * * * * * * * * * * CR Cap-Rack Capacitor Array p. 54 Z +80% -20% * * * ** * RC Bleed Resistor p. 58 - 61 P +100% -0% * * * ** * 2 Phone: +1.661.295.5920 | www.novacap.com 15 T Technical Summary W Technical Information Novacap provides application notes throughout this catalog as a guide to chip selection and attachment methods. Refer to the Novacap Technical Brochure found at www.novacap.com for more details. This technical information includes the nature of capacitance, dielectric properties, electrical properties, classes of dielectrics, ferroelectric behavior, test standards, and high reliability test plans. Please do not hesitate to contact the sales office for any product or technical assistance. C0G/NP0: Ultra stable Class I dielectric, with negligible dependence of capacitance on temperature, voltage, frequency, and time. Used in circuitry requiring very stable performance. X7R: Stable Class II dielectric, with predictable change in properties across a temperature range of -55C to +125C. Used as blocking, decoupling, bypassing, and frequency discriminating elements. This dielectric is ferroelectric and provides higher capacitance than Class I materials. Capacitor Size Size availability is based primarily on capacitance values and voltage rating. Smaller units are generally less expensive. Because mass affects the thermal shock susceptibility of chip capacitors, size selection should consider the soldering method used to attach the chip to the board. Sizes 1812 and smaller can be wave, vapor phase, or reflow soldered. Larger units require reflow soldering. BX: The military specification for ceramic chip capacitors (MILPRF-55681) defines a mid-K stable dielectric designated as BX. The BX specification has voltage temperature limits in addition to temperature limits of capacitance. The BX dielectric is limited to 15% maximum change in capacitance between 25C and -55C or +125C and also has a voltage restriction of +15% / -25% maximum change in capacitance between 25C and -55C or +125C at rated voltage. Chip Selection Multilayer capacitors (MLC) are categorized by dielectric performance with temperature. The Temperature Coefficient of Capacitance describes the variance of capacitance value with temperature. The choice of components is therefore largely determined by the temperature stability required of the device and the size necessary for the desired capacitance value and voltage rating. * * * * * * * * Phone: +1.661.295.5920 | www.novacap.com D * * * Solderable Silver FlexiCapTM/Nickel Barrier 100% tin RoHS RoHS NG C * * * * * * * * * * * Copper Barrier 90/10% tin/lead Y * * * * * * * Nickel Barrier Gold flash Nickel Barrier 90/10% tin/lead Nickel Barrier 100% tin Solderable Palladium Silver RoHS RoHS RoHS PR K N * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Termination Material Copper Barrier 100% tin P * * * Palladium Silver Palladium Silver Dielectric Code N/RN C0G/NP0 K R3L B/RB X7R W X5R X BX Y Y5V Z Z5U M C0G/NP0 (Mag free) C X7R (Mag free) S X8R F C0G/NP0 (160C) D C0G/NP0 (200C) G Class II (160C) E Class II (200C) P Pulse Power R R2D FlexiCapTM/Nickel Barrier 90/10% tin/lead Z5U/Y5V: General purpose Class III dielectrics with higher dielectric constant and greater variation of properties over temperature and voltage. Very high capacitance per volume is attainable for general purpose applications where stability over a wide temperature range is not critical. Packaging Units are available reeled, in waffle pack, or bulk packaged. Bar coded labels are standard for reeled and bulk packaging. Dielectric Termination Combinations RoHS B E RoHS S * * * * * * * * * MB Primary Dielectric Types * * * * * * We recommend the following termination types: Solder Attachment: N Nickel Barrier, 100% matte tin plated - RoHS C FlexiCapTM with Nickel Barrier, 100% tin plated - RoHS Y Nickel Barrier, tin-lead plated D FlexiCapTM Nickel Barrier, tin-lead plated * B Copper Barrier 100% matte tin plated - RoHS * E Copper Barrier, tin-lead plated K Solderable Palladium Silver RoHS * * S * * * * * Solderable Silver - RoHS Conductive Epoxy attachment: P Palladium Silver PR Palladium Silver - RoHS NG Nickel Barrier Gold Flash, also suitable for soldering attachment - RoHS 3 Dielectric Characteristics X7R (B) Stable and RoHS 2013 (RB) type -55C to 125C Temperature coefficient : 15% DC Max. Dissipation factor 2.5% max 3.5% max >25V rating: <25V rating: Insulation resistance: Dielectric withstanding voltage @25C: @125C: <200V: 201-500V: >500V: Ageing rate: >100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater 20 UPPER LIMIT 15 10 5 TYPICAL 0 -5 -10 -15 -20 -55 <2.0% per decade Test parameters: TEMPERATURE COEFFICIENT %DC %CAPACITANCE CHANGE Operating temperature range: LOWER LIMIT -35 -15 5 25 45 65 85 105 125 105 125 105 125 TEMPERATURE C 1KHz, 1.0 0.2 VRMS, 25C X7R (C) Stable Non Magnetic -55C to 125C Temperature coefficient: 15% DC Max. Dissipation factor 2.5% max 3.5% max >25V rating: <25V rating: Insulation resistance: Dielectric withstanding voltage @25C: @125C: <200V: 201-500V: >500V: Ageing rate: >100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater 20 UPPER LIMIT 15 10 5 TYPICAL 0 -5 -10 -15 -20 -55 <2.0% per decade Test parameters: TEMPERATURE COEFFICIENT %DC %CAPACITANCE CHANGE Operating temperature range: LOWER LIMIT -35 -15 5 25 45 65 85 TEMPERATURE C 1KHz, 1.0 0.2 VRMS, 25C BX (X) Stable -55C to 125C Temperature coefficient: Temp-voltage coefficient: 15% DC Max. +15% -25% DC Max. Dissipation factor 2.5% max 3.5% max Insulation resistance: Dielectric withstanding voltage >25V rating: <25V rating: @25C: @125C: <200V: 201-500V: >500V: >100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: <2.0% per decade Test parameters: 1KHz, 1.0 0.2 VRMS, 25C TEMPERATURE COEFFICIENT %DC 20 %CAPACITANCE CHANGE Operating temperature range: UPPER LIMIT 15 10 5 TYPICAL 0 -5 -10 -15 -20 -55 LOWER LIMIT -35 -15 5 25 45 65 85 TEMPERATURE C X8R (S) Stable -55C to 150C Temp. coefficient <150C: 15% DC Max. Dissipation factor 2.5% max 3.5% max Insulation resistance Dielectric withstanding voltage >25V rating: <25V rating: @25C: @150C: <200V: 201-500V: >500V: >100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: <2.0% per decade Test parameters: 1KHz, 1.0 0.2 VRMS, 25C 6 TEMPERATURE COEFFICIENT %DC 40 % CAPACITANCE CHANGE Operating temperature range: 20 0 -20 -40 -55 -25 0 25 50 75 100 125 150 TEMPERATURE C Phone: +1.661.295.5920 | www.novacap.com Chip Dimensions L T W MB Dimensions - inches (mm) Size Length (L) Width (W) Max. Thickness (T)* Termination Band (MB) 0402 0.040 0.004 (1.02 0.102) 0.020 0.004 (0.508 0.102) 0.024 (0.610) 0.010 0.006 (0.254 0.152) 0504 0.050 0.006 (1.27 0.152) 0.040 0.006 (1.02 0.152) 0.044 (1.12) 0.014 0.006 (0.356 0.152) 0.055 +0.015 -0.010 (1.4 +0.38 -0.25) 0.055 0.015 (1.40 0.381) 0.057 (1.45) 0.014 0.006 (0.356 0.152) 0603 0.060 0.006 (1.52 0.152) 0.030 0.006 (0.762 0.152) 0.035 (0.889) 0.014 0.006 (0.356 0.152) 0805 0.080 0.008 (2.03 0.203) 0.050 0.008 (1.27 0.203) 0.054 (1.37) 0.020 0.010 (0.508 0.254) 0907 0.090 0.008 (2.29 0.203) 0.070 0.008 (1.78 0.203) 0.060 (1.52) 0.020 0.010 (0.508 0.254) 1005 0.100 0.008 (2.54 0.203) 0.050 0.008 (1.27 0.203) 0.054 (1.37) 0.020 0.010 (0.508 0.254) 0.110+0.025 -0.010 (2.79 +0.64 -0.25) 0.110 0.015 (2.79 0.381) 0.102 (2.59) 0.020 0.010 (0.508 0.254) 1206 0.125 0.008 (3.18 0.203) 0.060 0.008 (1.52 0.203) 0.064 (1.63) 0.020 0.010 (0.508 0.254) 1210 0.125 0.008 (3.18 0.203) 0.100 0.008 (2.54 0.203) 0.065 (1.65) 0.020 0.010 (0.508 0.254) 1515 0.150 0.015 (3.81 0.381) 0.150 0.015 (3.81 0.381) 0.130 (3.30) 0.030 0.015 (0.762 0.381) 1808 0.180 0.012 (4.57 0.305) 0.080 0.008 (2.03 0.203) 0.065 (1.65) 0.024 0.014 (0.610 0.356) 1812 0.180 0.012 (4.57 0.305) 0.125 0.008 (3.18 0.203) 0.065 (1.65) 0.024 0.014 (0.610 0.356) 1825 0.180 0.012 (4.57 0.305) 0.250 0.015 (6.35 0.381) 0.080 (2.03) 0.024 0.014 (0.610 0.356) 2020 0.200 0.015 (5.08 0.381) 0.200 0.015 (5.08 0.381) 0.180 (4.57) 0.024 0.014 (0.610 0.356) 2221 0.220 0.015 (5.59 0.381) 0.210 0.015 (5.33 0.381) 0.080 (2.03) 0.030 0.015 (0.762 0.381) 2225 0.220 0.015 (5.59 0.381) 0.250 0.015 (6.35 0.381) 0.080 (2.03) 0.030 0.015 (0.762 0.381) 2520 0.250 0.015 (6.35 0.381) 0.200 0.015 (5.08 0.381) 0.180 (4.57) 0.030 0.015 (0.762 0.381) 0.230 +0.020 -0.012 (5.84 +0.51 -0.30) 0.250 0.015 (6.35 0.381) 0.165 (4.19) 0.030 0.015 (0.762 0.381) 3333 0.330 0.017 (8.38 0.432) 0.330 0.017 (8.38 0.432) 0.250 (6.35) 0.030 0.015 (0.762 0.381) 3530 0.350 0.018 (8.89 0.457) 0.300 0.015 (7.62 0.381) 0.250 (6.35) 0.030 0.015 (0.762 0.381) 4040 0.400 0.020 (10.2 0.508) 0.400 0.020 (10.2 0.508) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 4540 0.450 0.023 (11.4 0.584) 0.400 0.020 (10.2 0.508) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 5440 0.540 0.027 (13.7 0.686) 0.400 0.020 (10.2 0.508) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 5550 0.550 0.028 (14.0 0.711) 0.500 0.025 (12.7 0.635) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 6560 0.650 0.033 (16.5 0.838) 0.600 0.030 (15.2 0.762) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 7565 0.750 0.038 (19.1 0.965) 0.650 0.033 (16.5 0.838) 0.300 (7.62) 0.040 0.020 (1.02 0.508) RF0505 RF1111 RF2525 * Non standard thicknesses are available - consult the sales office for details. 12 Phone: +1.661.295.5920 | www.novacap.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Novacap: 1812B102J202N 1812B102K202YHM 0805B102K501Y 1812B471M302NT 5550B473K402N 0805B331J601YHTHB 1808B102M202NT 2520B102K502P 1210B472K102NT 1206B823J500N 2020B103K202NT 1210B152K152N 1206B472K102NT 0805B562K501NTM 1812B473K501NT 1812B223K501CT 1812B104K501NT 1812B104K201NT 1812B472K202NT 1812B222K202CT 1812B222K202NT 0805B102K201CT 0603B102K201CT 1812B102K202NT 1210B472K152NT 1825B684K251NT 2225B104K102NT 2225B474K251NT 1808B103K102NT 1812B824K101CXT 2225B105K101NT 1210B223K501NT 1210B473K501NT 1210B473K501CT 1825B105K101NT 1825B105K101CT 1812B334K251CXT 1515B102K202NT 1825B154M201NT 1825B104K501CT 2225B474K500NT 1206B102K202NT 1206B471K202NT 1808B222M202NT 1515B103K102NT 1825B474K201CT 1825B104K201NT 1812B223K102NT 1812B273K102NT 1812B473K102NXT 1825B102K202NT 1825B103K202NT 1812B103K102NT 1812B103K102CT 0504B102K101NT 0504B103K101NT 1808B102K202NT 1808B152K202NT 2225B103K202NT 1812B224K251CT 1812B224K251NT 1206B471K501CT 1206B472K501CT 1808B221K302NT 1808B151K302NT 2225B102K302NT 1206B224K500CT 1206B102K500CT 2225B222K302NT 1210B102K202NT 1210B102K202CT 2225B105K251NXT 1210B471K202NT 1825B104K102CXT 1210B104K201NT 1206B103M501CT 1812B105K500CXT 0805B221K501CT 1812B471K302NT 1812B102K302NT 1210B104K101CT 1210B473K251CT 0805B102K501YT 1812B102K202YHTM 1812B102J202NT 1206B104Z500PT 2225B332K202NT 1812B683J501NT 0805B271K601N 1808B103J102NT 2020B104M801NT 1206B102M202N 1206B104J101N 1206B223K501N 1825B104K601N 1825B334K501Y 2225B103J202NX122 1825B474K301NX 1808B102M202N 2225B105K500N