Phone: +1.661.295.5920 | www.novacap.com
Commercial Chip - X7R 16Vdc to 10kVdc
A range of commercial MLC chip capacitors in Stable EIA Class
II dielectric. Class II X7R chips are used as decoupling, by-pass,
filtering and transient voltage suppression elements and exhibit
+/-15% temperature coefficient and predictable variation of
electrical properties with time, temperature and voltage.
Designed for surface mount application with nickel barrier
terminations making them suitable for solder wave and reflow
solder board attachment as well as vapor phase attachment for
part sizes 2225 or smaller. Silver-palladium terminations are also
available for hybrid use with conductive epoxy.
Capacitance and voltage selection for popular chip sizes
Size 0402 0504 0603 0805 1005 1206 1210 1515 1808 1812 1825
Min cap.
121 121 121 121 121 121 121 151 151 151 151 151 471 471
Tmax inches:
mm:
0. 024
0.61
0.044
1.12
0.035
0.89
0.054
1.37
0.054
1.37
0.064
1.63
0.065
1.63
0.130
3.02
0.065
1.63
0.080*
2.03
0.065
1.63
0.100*
2.54
0.080
2.03
0.140*
3.56
16V
562 393 273 124 154 334 474 125 684 824 125 155 185 225
25V
472 333 223 104 124 274 474 105 564 564 105 125 155 225
50V
472 333 223 104 124 274 474 824 394 564 824 125 155 225
100V
472 333 223 683 823 184 334 684 274 394 564 824 125 185
200V
222 153 103 333 473 104 184 564 184 224 334 564 824 155
250V
152 103 682 273 393 683 124 394 124 154 224 394 684 125
300V
•••153 183 473 823 274 823 104 154 224 474 824
400V
•••123 123 273 563 224 563 823 104 184 334 564
500V
•••123 822 223 563 154 563 683 104 154 334 474
600V
•••822 822 183 393 124 393 563 683 124 224 394
800V†
•••472 472 103 273 823 273 333 473 683 124 274
1kV†
•••272 272 682 153 563 153 223 273 473 823 154
1.5kV†
•••••222 472 183 472 682 822 153 273 563
2kV†
•••••102 222 822 272 332 472 682 123 273
3kV†
•••••••152 561 821 122 122 472 103
4kV†
•••••••122 331 391 681 122 152 272
5kV†
••••••••••••821 182
6kV†
••••••••••••••
7kV†
••••••••••••••
8kV†
••••••••••••••
9kV†
•••••••••••••
10kV†
•••••••• • •••••
† Units rated above 800V may require conformal coating to preclude arcing over chip surface
Phone: +1.661.295.5920 | www.novacap.com
Standard EIA case sizes and available C/V values are listed below
- special sizes, thicknesses and other voltage ratings are available;
please contact the sales office for information.
20
Phone: +1.661.295.5920 | www.novacap.com
Capacitance and voltage selection for popular chip sizes
Size 0402 0504 0603 0805 1005 1206 1210 1515 1808 1812 1825
Min cap.
121 121 121 121 121 121 121 151 151 151 151 151 471 471
Tmax inches:
mm:
0. 024
0.61
0.044
1.12
0.035
0.89
0.054
1.37
0.054
1.37
0.064
1.63
0.065
1.63
0.130
3.02
0.065
1.63
0.080*
2.03
0.065
1.63
0.100*
2.54
0.080
2.03
0.140*
3.56
16V
562 393 273 124 154 334 474 125 684 824 125 155 185 225
25V
472 333 223 104 124 274 474 105 564 564 105 125 155 225
50V
472 333 223 104 124 274 474 824 394 564 824 125 155 225
100V
472 333 223 683 823 184 334 684 274 394 564 824 125 185
200V
222 153 103 333 473 104 184 564 184 224 334 564 824 155
250V
152 103 682 273 393 683 124 394 124 154 224 394 684 125
300V
•••153 183 473 823 274 823 104 154 224 474 824
400V
•••123 123 273 563 224 563 823 104 184 334 564
500V
•••123 822 223 563 154 563 683 104 154 334 474
600V
•••822 822 183 393 124 393 563 683 124 224 394
800V†
•••472 472 103 273 823 273 333 473 683 124 274
1kV†
•••272 272 682 153 563 153 223 273 473 823 154
1.5kV†
•••••222 472 183 472 682 822 153 273 563
2kV†
•••••102 222 822 272 332 472 682 123 273
3kV†
•••••••152 561 821 122 122 472 103
4kV†
•••••••122 331 391 681 122 152 272
5kV†
••••••••••••821 182
6kV†
••••••••••••••
7kV†
••••••••••••••
8kV†
••••••••••••••
9kV†
•••••••••••••
10kV†
•••••••• • •••••
† Units rated above 800V may require conformal coating to preclude arcing over chip surface
Commercial Chip - X7R 16Vdc to 10kVdc
Capacitance and voltage selection for popular chip sizes
2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size
471 471 471 471 102 102 102 102 102 102 102 222 222
Min cap.
0.180
4.57
0.080
2.03
0.080
2.03
0.150*
3.81
0.180
4.57
0.250
6.35
0.250
6.35
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
0.300
7.62
:inches Tmax
:mm
185 155 225 275 355 525 525 825 905 106 126 206 256
16V
155 125 185 225 325 505 505 755 805 106 106 186 226
25V
155 125 185 225 325 425 425 705 755 905 106 156 206
50V
155 125 155 225 275 405 405 625 685 825 905 126 186
100V
125 684 105 185 225 355 355 565 625 705 825 106 156
200V
105 564 824 155 185 325 325 505 605 685 805 825 126
250V
824 394 474 105 125 225 225 475 505 575 705 755 106
300V
564 274 394 684 824 125 125 255 275 305 375 545 875
400V
474 274 334 564 684 105 105 185 185 185 225 335 475
500V
274 224 274 474 394 684 684 155 155 155 225 275 395
600V
224 124 154 334 274 474 394 684 824 105 155 225 275
800V†
154 823 104 224 184 334 334 564 684 684 105 155 185
1kV†
393 273 333 683 563 124 124 274 334 344 474 684 824
1.5kV†
273 123 153 333 273 823 683 154 184 184 274 394 474
2kV†
103 472 562 123 822 333 273 683 683 823 124 184 224
3kV†
272 152 152 332 472 183 153 223 333 393 473 823 104
4kV†
152 821 102 222 272 123 103 123 183 223 333 473 563
5kV†
•••••682 562 822 123 153 223 333 393
6kV†
••••••472 562 822 103 153 223 273
7kV†
••••••332 472 682 822 123 153 223
8kV†
••••••272 332 472 562 103 123 183
9kV†
••••••182 272 392 472 682 103 123
10kV†
* Denotes non standard chip thickness.
Order code needs to have an ’X’ inserted together with the dimension in inches e.g. X080 where dimension is 0.080”
l For dielectric characteristics see page 6.
l For dimensions see page 12.
l For termination options see pages 3 & 15.
l For capacitance tolerances available see page 15.
l For ordering information see page 15.
Note: Maximum capacitance values are shown below as 3 digit
code: 2 significant figures followed by the no. of zeros
e.g. 183 = 18,000pF.
Phone: +1.661.295.5920 | www.novacap.com 21
Phone: +1.661.295.5920 | www.novacap.com
Chip Ordering Information
Capacitance Code
1st two digits are
significant, third
digit denotes
number of zeros,
R = decimal
Examples:
1R0 = 1.0pF
120 = 12pF
471 = 470pF
102 = 1,000pF
273 = 0.027µF
474 = 0.47µF
105 = 1.0µF
Voltage Code
1st two digits are significant,
third digit denotes number of
zeros. For example:
160 = 16 Volts
101 = 100 Volts
501 = 500 Volts
102 = 1,000 Volts
502 = 5,000 Volts
103 = 10,000 Volts
Termination Codes
PPalladium Silver
PR Palladium Silver*
KSolderable Palladium Silver*
NNickel Barrier*100% tin
YNickel Barrier 90% tin, 10% lead
NG Nickel Barrier Gold Flash*
CFlexiCap™/Nickel Barrier*100% tin
DFlexiCap™/Nickel Barrier 90% tin, 10% lead
BCopper Barrier*100% tin
ECopper Barrier 90% tin, 10% lead
SSilver*
* Indicates RoHS terminations
Marking
None Unmarked
MMarked
*Marking not
available on
sizes < 0603
Packaging
None Bulk
TTape and Reel
W Waffle Pack
Hi-Reliability
Testing Criteria
HB MIL-PRF-55681 Group A
HK MIL-PRF-38534 Class K
HS MIL-PRF-123 Group A
Prefix
Case Size
Dielectric
Capacitance
Capacitance
Tolerance
Voltage
Termination
Special
Thickness
High Reliability
Testing
Packaging
Marking
High Reliability
Test Criteria
XX 1206 N 472 J 101 N X050 H T M HB
Dielectric Codes
NC0G/NP0 Ultra Stable
MC0G/NP0 Ultra Stable Magnetic Free
FC0G/NP0 High Temp. (up to 160ºC)
DC0G/NP0 High Temp. (up to 200ºC)
KR3L Ultra Stable
RR2D Pulse Energy
YY5V General Purpose
ZZ5U General Purpose
BX7R Stable
CX7R Stable Magnetic Free
XBX MIL
SX8R High Temp. (up to 150ºC)
EClass II High Temp. (up to 200ºC)
GClass II High Temp. (up to 160ºC)
WX5R Stable
PPositive VTC Pulse Power
RN NP0 RoHS 2013 < 200V
RB X7R RoHS 2013 < 200V
Capacitance Tolerance Codes
Code Tolerance
* Not RF series
C0G/NP0 R3L R2D Y5V
Z5U X7R BX X8R Class
II X5R Positive
VTC
N M F/D K R Y/Z B C X S E/G W P
B±0.10pF
Cap. Value
< 10pF
• •
C±0.25pF • • •
D±0.50pF • • •
F±1% •••
G±2% ••••
J±5% ••••• •*• •*• •
K±10% ••••• •••••••
M±20% • •••••••••••
Z+80% -20% • • • •*•
P+100% -0% • • • •*•
High Reliability
Testing
None Standard product
H High Reliability Testing
HHigh Temp Screening
Special Thickness
None Standard thickness
as per Novacap
catalog specifications
X Denotes a special
thickness other than
standard. Specify in
inches if required.
(As shown above X
= 0.050”)
{
-
Prefix Definitions
None Standard chip
RF Improved ESR Capacitor p. 23
LS Y3 Certified Safety Capacitor p. 42 - 43
ES Y2 Certified Safety Capacitor p. 42 - 43
ST Stacked Capacitor Assembly p. 48 - 53
SM Stacked Hi-Rel Capacitor Assembly p. 48 - 53
CR Cap-Rack Capacitor Array p. 54
RC Bleed Resistor p. 58 - 61
15
Phone: +1.661.295.5920 | www.novacap.com
L
W
MB
T
L
W
MB
T
Technical Summary
Palladium Silver
Palladium Silver
Solderable
Palladium Silver
Nickel Barrier
100% tin
Nickel Barrier
90/10% tin/lead
Nickel Barrier
Gold flash
FlexiCap™/Nickel Barrier
100% tin
FlexiCap™/Nickel Barrier
90/10% tin/lead
Copper Barrier
100% tin
Copper Barrier
90/10% tin/lead
Solderable Silver
RoHS RoHS RoHS RoHS RoHS RoHS RoHS
Dielectric Code
P PR K N Y NG C D B E S
C0G/NP0
N/RN
•••••••• •
R3L
K
••••••••
X7R
B/RB
•••••••• •
X5R
W
•••
BX
X
•••••••• •
Y5V
Y
• • • •
Z5U
Z
• • • •
C0G/NP0 (Mag free)
M
••• ••
X7R (Mag free)
C
••• ••
X8R
S
••••• •• •
C0G/NP0 (160ºC)
F
••••• •• •
C0G/NP0 (200ºC)
D
• •
Class II (160ºC)
G
••••• •• •
Class II (200ºC)
E
• •
Pulse Power
P
•••
R2D
R
•••
Technical Information
Novacap provides application notes throughout this catalog as
a guide to chip selection and attachment methods. Refer to the
Novacap Technical Brochure found at www.novacap.com for
more details. This technical information includes the nature of
capacitance, dielectric properties, electrical properties, classes
of dielectrics, ferroelectric behavior, test standards, and high
reliability test plans. Please do not hesitate to contact the sales
office for any product or technical assistance.
Capacitor Size
Size availability is based primarily on capacitance values and
voltage rating. Smaller units are generally less expensive.
Because mass affects the thermal shock susceptibility of chip
capacitors, size selection should consider the soldering method
used to attach the chip to the board. Sizes 1812 and smaller
can be wave, vapor phase, or reflow soldered. Larger units
require reflow soldering.
Chip Selection
Multilayer capacitors (MLC) are categorized by dielectric
performance with temperature. The Temperature Coefficient
of Capacitance describes the variance of capacitance value with
temperature. The choice of components is therefore largely
determined by the temperature stability required of the device
and the size necessary for the desired capacitance value and
voltage rating.
Packaging
Units are available reeled, in waffle pack, or bulk packaged. Bar
coded labels are standard for reeled and bulk packaging.
Dielectric
Termination
Combinations
Primary Dielectric Types
C0G/NP0:
Ultra stable Class I dielectric, with negligible dependence of
capacitance on temperature, voltage, frequency, and time. Used
in circuitry requiring very stable performance.
X7R:
Stable Class II dielectric, with predictable change in properties
across a temperature range of -55°C to +125°C. Used as
blocking, decoupling, bypassing, and frequency discriminating
elements. This dielectric is ferroelectric and provides higher
capacitance than Class I materials.
BX:
The military specification for ceramic chip capacitors (MIL-
PRF-55681) defines a mid-K stable dielectric designated as BX.
The BX specification has voltage temperature limits in addition
to temperature limits of capacitance. The BX dielectric is limited
to ±15% maximum change in capacitance between 25°C and
-55°C or +125°C and also has a voltage restriction of +15%
/ -25% maximum change in capacitance between 25°C and
-55°C or +125°C at rated voltage.
Z5U/Y5V:
General purpose Class III dielectrics with higher dielectric
constant and greater variation of properties over temperature
and voltage. Very high capacitance per volume is attainable
for general purpose applications where stability over a wide
temperature range is not critical.
Termination Material
We recommend the following
termination types:
Solder Attachment:
N Nickel Barrier, 100% matte tin
plated - RoHS
C FlexiCap™ with Nickel Barrier,
100% tin plated - RoHS
Y Nickel Barrier, tin-lead plated
D FlexiCap™ Nickel Barrier, tin-lead
plated
B Copper Barrier 100% matte tin
plated - RoHS
E Copper Barrier, tin-lead plated
K Solderable Palladium Silver -
RoHS
S Solderable Silver - RoHS
Conductive Epoxy attachment:
P Palladium Silver
PR Palladium Silver - RoHS
NG Nickel Barrier Gold Flash,
also suitable for soldering
attachment - RoHS
3
Phone: +1.661.295.5920 | www.novacap.com
Dielectric Characteristics
X7R (B) Stable and RoHS 2013 (RB) type
Operating temperature range: -55°C to 125°C
Temperature coefficient : ±15% DC Max.
Dissipation factor >25V rating:
<25V rating:
2.5% max
3.5% max
Insulation resistance: @25ºC:
@125ºC:
>100GW or >1000WF whichever is less
>10GW or >100WF whichever is less
Dielectric <200V:
withstanding 201-500V:
voltage >500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: <2.0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
TEMPERATURE COEFFICIENT
-55 -35 -15 52545 65 10585 125
TYPICAL
UPPER LIMIT
LOWER LIMIT
20
15
10
5
0
-5
-10
-15
-20
%DC
TEMPERATURE °C
%CAPACITANCE CHANGE
BX (X) Stable
Operating temperature range: -55°C to 125°C
Temperature coefficient:
Temp-voltage coefficient:
±15% DC Max.
+15% -25% DC Max.
Dissipation factor >25V rating:
<25V rating:
2.5% max
3.5% max
Insulation resistance: @25ºC:
@125ºC:
>100GW or >1000WF whichever is less
>10GW or >100WF whichever is less
Dielectric <200V:
withstanding 201-500V:
voltage >500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: <2.0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
TEMPERATURE COEFFICIENT
-55 -35 -15 52545 65 10585 125
TYPICAL
UPPER LIMIT
LOWER LIMIT
20
15
10
5
0
-5
-10
-15
-20
%DC
TEMPERATURE °C
%CAPACITANCE CHANGE
X8R (S) Stable
Operating temperature range: -55°C to 150°C
Temp. coefficient <150ºC: ±15% DC Max.
Dissipation factor >25V rating:
<25V rating:
2.5% max
3.5% max
Insulation
resistance
@25ºC:
@150ºC:
>100GW or >1000WF whichever is less
>10GW or >100WF whichever is less
Dielectric
withstanding
voltage
<200V:
201-500V:
>500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: <2.0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
TEMPERATURE °C
-55 -25 02550 10075 125 150
20
40
0
-20
-40
%DC
% CAPACITANCE CHANGE
TEMPERATURE COEFFICIENT
X7R (C) Stable Non Magnetic
Operating temperature range: -55°C to 125°C
Temperature coefficient: ±15% DC Max.
Dissipation factor >25V rating:
<25V rating:
2.5% max
3.5% max
Insulation resistance: @25ºC:
@125ºC:
>100GW or >1000WF whichever is less
>10GW or >100WF whichever is less
Dielectric <200V:
withstanding 201-500V:
voltage >500V:
250%
150% or 500V whichever is greater
120% or 750V whichever is greater
Ageing rate: <2.0% per decade
Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C
TEMPERATURE COEFFICIENT
-55 -35 -15 52545 65 10585 125
TYPICAL
UPPER LIMIT
LOWER LIMIT
20
15
10
5
0
-5
-10
-15
-20
%DC
TEMPERATURE °C
%CAPACITANCE CHANGE
6
Phone: +1.661.295.5920 | www.novacap.com
L
W
MB
T
Chip Dimensions
Dimensions - inches (mm)
Size Length (L) Width (W) Max. Thickness (T)* Termination Band (MB)
0402 0.040 ± 0.004 (1.02 ± 0.102) 0.020 ± 0.004 (0.508 ± 0.102) 0.024 (0.610) 0.010 ± 0.006 (0.254 ± 0.152)
0504 0.050 ± 0.006 (1.27 ± 0.152) 0.040 ± 0.006 (1.02 ± 0.152) 0.044 (1.12) 0.014 ± 0.006 (0.356 ± 0.152)
RF0505 0.055 +0.015 -0.010 (1.4 +0.38 -0.25) 0.055 ± 0.015 (1.40 ± 0.381) 0.057 (1.45) 0.014 ± 0.006 (0.356 ± 0.152)
0603 0.060 ± 0.006 (1.52 ± 0.152) 0.030 ± 0.006 (0.762 ± 0.152) 0.035 (0.889) 0.014 ± 0.006 (0.356 ± 0.152)
0805 0.080 ± 0.008 (2.03 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254)
0907 0.090 ± 0.008 (2.29 ± 0.203) 0.070 ± 0.008 (1.78 ± 0.203) 0.060 (1.52) 0.020 ± 0.010 (0.508 ± 0.254)
1005 0.100 ± 0.008 (2.54 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254)
RF1111 0.110+0.025 -0.010 (2.79 +0.64 -0.25) 0.110 ± 0.015 (2.79 ± 0.381) 0.102 (2.59) 0.020 ± 0.010 (0.508 ± 0.254)
1206 0.125 ± 0.008 (3.18 ± 0.203) 0.060 ± 0.008 (1.52 ± 0.203) 0.064 (1.63) 0.020 ± 0.010 (0.508 ± 0.254)
1210 0.125 ± 0.008 (3.18 ± 0.203) 0.100 ± 0.008 (2.54 ± 0.203) 0.065 (1.65) 0.020 ± 0.010 (0.508 ± 0.254)
1515 0.150 ± 0.015 (3.81 ± 0.381) 0.150 ± 0.015 (3.81 ± 0.381) 0.130 (3.30) 0.030 ± 0.015 (0.762 ± 0.381)
1808 0.180 ± 0.012 (4.57 ± 0.305) 0.080 ± 0.008 (2.03 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356)
1812 0.180 ± 0.012 (4.57 ± 0.305) 0.125 ± 0.008 (3.18 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356)
1825 0.180 ± 0.012 (4.57 ± 0.305) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.024 ± 0.014 (0.610 ± 0.356)
2020 0.200 ± 0.015 (5.08 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.024 ± 0.014 (0.610 ± 0.356)
2221 0.220 ± 0.015 (5.59 ± 0.381) 0.210 ± 0.015 (5.33 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381)
2225 0.220 ± 0.015 (5.59 ± 0.381) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381)
2520 0.250 ± 0.015 (6.35 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.030 ± 0.015 (0.762 ± 0.381)
RF2525 0.230 +0.020 -0.012 (5.84 +0.51 -0.30) 0.250 ± 0.015 (6.35 ± 0.381) 0.165 (4.19) 0.030 ± 0.015 (0.762 ± 0.381)
3333 0.330 ± 0.017 (8.38 ± 0.432) 0.330 ± 0.017 (8.38 ± 0.432) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381)
3530 0.350 ± 0.018 (8.89 ± 0.457) 0.300 ± 0.015 (7.62 ± 0.381) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381)
4040 0.400 ± 0.020 (10.2 ± 0.508) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
4540 0.450 ± 0.023 (11.4 ± 0.584) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
5440 0.540 ± 0.027 (13.7 ± 0.686) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
5550 0.550 ± 0.028 (14.0 ± 0.711) 0.500 ± 0.025 (12.7 ± 0.635) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
6560 0.650 ± 0.033 (16.5 ± 0.838) 0.600 ± 0.030 (15.2 ± 0.762) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
7565 0.750 ± 0.038 (19.1 ± 0.965) 0.650 ± 0.033 (16.5 ± 0.838) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508)
* Non standard thicknesses are available - consult the sales office for details.
Phone: +1.661.295.5920 | www.novacap.com
12
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Novacap:
1812B102J202N 1812B102K202YHM 0805B102K501Y 1812B471M302NT 5550B473K402N 0805B331J601YHT-
HB 1808B102M202NT 2520B102K502P 1210B472K102NT 1206B823J500N 2020B103K202NT 1210B152K152N
1206B472K102NT 0805B562K501NTM 1812B473K501NT 1812B223K501CT 1812B104K501NT 1812B104K201NT
1812B472K202NT 1812B222K202CT 1812B222K202NT 0805B102K201CT 0603B102K201CT 1812B102K202NT
1210B472K152NT 1825B684K251NT 2225B104K102NT 2225B474K251NT 1808B103K102NT
1812B824K101CXT 2225B105K101NT 1210B223K501NT 1210B473K501NT 1210B473K501CT 1825B105K101NT
1825B105K101CT 1812B334K251CXT 1515B102K202NT 1825B154M201NT 1825B104K501CT
2225B474K500NT 1206B102K202NT 1206B471K202NT 1808B222M202NT 1515B103K102NT 1825B474K201CT
1825B104K201NT 1812B223K102NT 1812B273K102NT 1812B473K102NXT 1825B102K202NT 1825B103K202NT
1812B103K102NT 1812B103K102CT 0504B102K101NT 0504B103K101NT 1808B102K202NT 1808B152K202NT
2225B103K202NT 1812B224K251CT 1812B224K251NT 1206B471K501CT 1206B472K501CT 1808B221K302NT
1808B151K302NT 2225B102K302NT 1206B224K500CT 1206B102K500CT 2225B222K302NT 1210B102K202NT
1210B102K202CT 2225B105K251NXT 1210B471K202NT 1825B104K102CXT 1210B104K201NT
1206B103M501CT 1812B105K500CXT 0805B221K501CT 1812B471K302NT 1812B102K302NT 1210B104K101CT
1210B473K251CT 0805B102K501YT 1812B102K202YHTM 1812B102J202NT 1206B104Z500PT
2225B332K202NT 1812B683J501NT 0805B271K601N 1808B103J102NT 2020B104M801NT 1206B102M202N
1206B104J101N 1206B223K501N 1825B104K601N 1825B334K501Y 2225B103J202NX122 1825B474K301NX
1808B102M202N 2225B105K500N
