High-Performance Surface-Mount TTL Delay Lines CTTLDL, BJTTLDL, GBTTLDL, BTTLDL n Military models with temperature range -55 to n Five equal taps in 20% increments of total delay. n Lumped constant, active series. n Transfer-molded packaging for highest reliability. n Designed for leading edge timing. Trailing edge +125oC and ceramic package IC to meet MIL-STD883C, but not screened to that specification, add suffix "M" to part number. n Military models as above, but with ceramic package IC screened to MIL-STD 883C and 38510, add suffix "MX" to part number. n Military models as "MX" above, but with in-house burn-in and thermal shock, add suffix "MY". timing available. n Supports Schottky TTL, FAST, and FACT logics. n Fanout 1 -- 20 loads; logic 0 -- 10 loads. n Temperature coefficient +2 ns or +4% (whichever is greater) at maximum delay, 0 to 70oC. LOW PROFILE SURFACE-MOUNT 5-TAP TTL DELAY LINES TAP D ELA YS (ns) T ECH NITROL PART NO. O.175" MAX HEIGHT ALL TAPS TDD 1 TDD 2 TDD 3 TDD 4 TDD5 TRO RO TFO FO CT TLDL025 5.0 10.0 15.0 20.0 25.0 2.0 2.0 CT TLDL050 10.0 20.0 30.0 40.0 50.0 2.0 2.0 CT TLDL075 15.0 30.0 45.0 60.0 75.0 2.0 2.0 CT TLDL100 20.0 40.0 60.0 80.0 100.0 2.0 5.0 CT TLDL125 25.0 50.0 75.0 100.0 125.0 2.0 5.0 CT TLDL150 30.0 60.0 90.0 120.0 150.0 2.0 6.0 CT TLDL200 40.0 80.0 120.0 160.0 200.0 2.0 7.0 Delay Characteristics measured at Vcc = 5.0V, 25oC, no load. Delay Tolerance +2 ns or 5%, whichever is greater. Rise time measured @ 0.8V to 2.0V levels. For minimum input pulse width -- contact factory. For TTL delay lines qualified to MIL-D-83532, refer to PSC information sheet entitled "QPL Active Delay Lines." MECHANICAL OUTLINE SCHEMATIC Notes n Pin numbers shown are for reference only and are not necessarily marked on unit. TWO PEARL BUCK COURT l n Lead material is electro tin plated (alloy 42) or solder dipped. BRISTOL, PA 19007-6812 l TEL 215-781-6400 l n All specifications are subject to change without notice. FAX 215-781-6403 l www.pulsespecialty.com CTTLDL, BJTTLDL, GBTTLDL, BTTLDL SURFACE-MOUNT 5-TAP TTL DELAY LINES -- 1/2" SQ. ALL TAPS T ECHNITR OL PAR T NO. PART NO. PA RT NO. TAP D ELAYS (ns) (Max.) TDD 1 TDD2 TDD 3 TDD4 TDD 5 TRO RO TFO FO BJT TLDL025 GBTT LDL025 BT TTLDL25 5.0 10.0 15.0 20.0 25.0 2.0 2.0 BJT TLDL050 GBTT LDL050 BT TTLDL50 10.0 20.0 30.0 40.0 50.0 2.0 2.0 BJT TLDL075 GBTT LDL075 BT TTLDL75 15.0 30.0 45.0 60.0 75.0 2.0 2.0 BJT TLDL100 GBTT LDL100 BTTTLDL100 20.0 40.0 60.0 80.0 100.0 2.0 5.0 BJT TLDL125 GBTT LDL125 BTTTLDL125 25.0 50.0 75.0 100.0 125.0 2.0 6.0 BJT TLDL150 GBTT LDL150 BTTTLDL150 30.0 60.0 90.0 120.0 150.0 2.0 7.0 BJT TLDL200 GBTT LDL200 BTTTLDL200 40.0 80.0 120.0 160.0 200.0 2.0 8.0 Delay Characteristics measured at Vcc = 5.0V, 25oC, no load. Delay Tolerance +2 ns or 5%, whichever is greater. Rise time measured @ 0.8V to 2.0V levels. For minimum input pulse width -- contact factory. SCHEMATICS MECHANICAL OUTLINES BJTTLDL J-Lead BJTTLDL GBTTLDL and BTTLDL C-Lead BTTLDL Gull Wing GBTTLDL Notes n Pin numbers shown are for reference only and are not necessarily marked on unit. TWO PEARL BUCK COURT l n Lead material is electro tin plated (alloy 42) or solder dipped. n All specifications are subject to change without notice. BRISTOL, PA 19007-6812 l TEL 215-781-6400 l FAX 215-781-6403 l www.pulsespecialty.com