1
Dear Customer:
Since our rst CostSaver Nut Ring came off the assembly line over 30 years ago,
Fastener Specialty, Inc. has been committed to creating innovative solutions for your
fastener needs. Throughout the years technology has made great strides, but our
philosophy has remained simple and straightforward: to facilitate the mounting of
electrical connectors and other components in conned areas of panels and bulkheads.
From our humble beginnings, we have built and expanded our standard product line
and provided customers with fastener solutions to meet their most demanding special
application needs. If you have used our products, you can attest to their versatility
and quality. If you are not familiar with our line, you are encouraged to take a closer
look. By eliminating loose nuts and washers, you save on installation time and avoid
loose hardware falling into circuitry. The non-wrenching feature allows closer design of
connectors in a panel.
As we enter the 21st century, Fastener Specialty hardware has become a standard on
more than 90 percent of all the production airframes in the U.S. and a growing number
in Europe. In addition to commercial and military aircraft, the captive-nut concept is
utilized in many other applications - the Joint Strike Fighter, the B2 “Stealth” bomber
and the Northrop Grumman Global Hawk to name a few. The only limits to its uses are
your imagination!
Our products, standard and custom, as well as our service and quality are second
to none. We have the personnel and capabilities to help with the most challenging
applications - large or small. Please call, fax or email us for design assistance.
We look forward to serving you - now and in the future. Our Success Is Mounting!
Phone: (972) 988-0064
Fax: (972) 660-3153
email: info@fastenerspecialty.com
web site: www.fastenerspecialty.com
2
FSU
FSU/MD FSC/MD
FR FHA
FSS1
FSS2
FSS4 FSS6
FS9
MS3100 • • • • • •
MS3102 • • • • • •
MS3400 • • • • • •
MS3402 • • • • • •
MS3412 • • • • • •
MS3450 • • • • • • •
MS3452 • • • • • • • • •
MS3110
• • • • • •
MS3112
• • • • • •
MS3119
• • • • • •
MS3120 • • • • • •
MS3122 • • • • • •
MS3127 • • • • • • • •
MS3128 • • • • • • • •
MS3130 • • • •
MS3470 • • •
MS3472 •
MS27466 • • • • • •
MS27469
• • • •
MS27472 • • • • • •
MS27475 • • • •
MS27476 • • • • • •
MS27479 • • • • • •
MS27482 • • • •
MS27496 • • • • • •
MS27497 • • • • •
MS27499 • • • • • •
MS27504 • • • • • •
MS27505 • • • • • •
MS27508 • •
MS27513 • • • • • •
MS27515 • • • • • •
MS27656
• • • • • •
D38999/20 • •
D38999/21
• •
D38999/22 • •
D38999/40 •
D38999/42 •
MS24264 • • • • • •
NAS1650 • • • • • •
NAS1651
• •
MIL-C-81511
• • • • • •
MIL-C-83723/1A
• • • • • •
MIL-C-83723/2B
• • • • • •
MIL-C-83723/3B
• •
MIL-C-83723/4B
• •
MIL-C-28876
•
MIL-C-28840
•
APPLICATION CROSS REFERENCE CHART
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Revised 5/07
Cage Code 04967
APPLICATION CROSS
REFERENCE CHART
(Connector Series to Nut Ring Series)
NUT RING SERIES
MIL
-C-
5015
MIL
-C-
26482
MIL
-C-
38999
MISC
C
O
N
N
E
C
T
O
R
S
E
R
I
E
S
3
CROSSOVER
MIL-C-85049
(AS85049)
Revised 5/07
Cage Code 04967
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
CROSSOVER MIL-C-85049
HEAVY DUTY
MIL-C-85049/94 NO. F/S PART NO.
MEDIUM DUTY
MIL-C-85049/95 NO. F/S PART NO.
LIGHT DUTY
MIL-C-85049/96 NO. F/S PART NO.
M85049/94-8 FSC/MD-8A01PD M85049/95-3A FSU-301PD M85049/96-3 FSS4-301PD
M85049/94-10 FSC/MD-10A01PD M85049/95-7A FSU-10/701PD M85049/96-7 FSS4-1001PD
M85049/94-12 FSC/MD-12A01PD M85049/95-8A FSU/MD-8A01PD M85049/96-8 FSS4-801PD
M85049/94-14 FSC/MD-14A01PD M85049/95-10A FSS1-1001PD M85049/96-10 FSS4-1001PD
M85049/94-16 FSC/MD-16A01PD M85049/95-10B FR-1001PD M85049/96-12 FSS4-1201PD
M85049/94-18 FSC/MD-18A01PD M85049/95-12A FSS1-1201PD M85049/96-14 FSS4-1401PD
M85049/94-20 FSC/MD-20A01PD M85049/95-12B FR-1201PD M85049/96-16 FSS4-1601PD
M85049/94-22 FSC/MD-22A01PD M85049/95-14A FSS1-1401PD M85049/96-18 FSS4-1801PD
M85049/94-24 FSC/MD-24A01PD M85049/95-14B FR-1401PD M85049/96-19 FSS4-1401PD
M85049/94-25 FSC/MD-25A01PD M85049/95-16A FSS1-1601PD M85049/96-20 FSS4-2001PD
M85049/95-16B FR-1601PD M85049/96-22 FSS4-2201PD
M85049/95-18A FSS1-1801PD M85049/96-24 FSS4-2401PD
M85049/95-18B FR-1801PD M85049/96-25 FSS4-2501PD
M85049/95-20A FSS1-2001PD M85049/96-27 FSS4-1601PD
M85049/95-20B FR-2001PD M85049/96-28 FSS4-2801PD
M85049/95-22A FSS1-2201PD M85049/96-32 FSS4-3201PD
M85049/95-22B FR-2201PD M85049/96-36 FSS4-3601PD
M85049/95-24A FR-2401PD M85049/96-37 FSS4-3701PD
M85049/95-24B FSS1-2401PD M85049/96-61 FSS4-6101PD
M85049/95-25A FSU/MD-25A01PD
M85049/95-27A FSU-16/2701PD
M-85049/95-28A FSU-2801PD
M85049/95-32A FSU-3201PD
M85049/95-36A FSU-3601PD
M85049/95-37A FSU-3701PD
M85049/95-61A FSU-6101PD
MIL-C-85049 to Fastener Specialty Crossover
Fastener Specialty currently supplies all congurations and variations of
MIL-C-85049/94, /95 and /96 (AS85049/94, /95 and /96).
4
Primer coated per MIL-P-23377 (“-A” Option)
MIL-C-85049 to Fastener Specialty Crossover
CROSSOVER MIL-C-85049
Revised 5/07
Cage Code 04967
Fastener Specialty currently supplies all congurations and variations of
MIL-C-85049/94, /95 and /96 (AS85049/94, /95 and /96).
CROSSOVER
MIL-C-85049
(AS85049)
HEAVY DUTY
MIL-C-85049/94 NO. F/S PART NO.
MEDIUM DUTY
MIL-C-85049/95 NO. F/S PART NO.
LIGHT DUTY
MIL-C-85049/96 NO.
F/S PART NO.
M85049/94-8-A FSC/MD-8A01
06PD M85049/95-3A-A FSU-30106PD M85049/96-3
-A
FSS4-30106PD
M85049/94-10-A FSC/MD-10A01
06PD M85049/95-7A-A FSU-10/70106PD M85049/96-7
-A
FSS4-100106PD
M85049/94-12-A FSC/MD-12A01
06PD M85049/95-8A-A FSU/MD-8A0106PD M85049/96-8
-A
FSS4-80106PD
M85049/94-14-A FSC/MD-14A01
06PD M85049/95-10A-A FSS1-100106PD M85049/96-10
-A
FSS4-100106PD
M85049/94-16-A FSC/MD-16A01
06PD M85049/95-10B-A FR-100106PD M85049/96-12
-A
FSS4-120106PD
M85049/94-18-A FSC/MD-18A01
06PD M85049/95-12A-A FSS1-120106PD M85049/96-14
-A
FSS4-140106PD
M85049/94-20-A FSC/MD-20A01
06PD M85049/95-12B-A FR-120106PD M85049/96-16
-A
FSS4-160106PD
M85049/94-22-A FSC/MD-22A01
06PD M85049/95-14A-A FSS1-140106PD M85049/96-18
-A
FSS4-180106PD
M85049/94-24-A FSC/MD-24A01
06PD M85049/95-14B-A FR-140106PD M85049/96-19
-A
FSS4-140106PD
M85049/94-25-A FSC/MD-25A01
06PD M85049/95-16A-A FSS1-160106PD M85049/96-20
-A
FSS4-200106PD
M85049/95-16B-A FR-160106PD M85049/96-22
-A
FSS4-220106PD
M85049/95-18A-A FSS1-180106PD M85049/96-24
-A
FSS4-240106PD
M85049/95-18B-A FR-180106PD M85049/96-25
-A
FSS4-250106PD
M85049/95-20A-A FSS1-200106PD M85049/96-27
-A
FSS4-160106PD
M85049/95-20B-A FR-200106PD M85049/96-28
-A
FSS4-280106PD
M85049/95-22A-A FSS1-220106PD M85049/96-32
-A
FSS4-320106PD
M85049/95-22B-A FR-220106PD M85049/96-36
-A
FSS4-360106PD
M85049/95-24A-A FR-240106PD M85049/96-37
-A
FSS4-370106PD
M85049/95-24B-A FSS1-240106PD M85049/96-61
-A
FSS4-610106PD
M85049/95-25A-A FSU/MD-25A0106PD
M85049/95-27A-A FSU-16/270106PD
M85049/95-28A-A FSU-280106PD
M85049/95-32A-A FSU-320106PD
M85049/95-36A-A FSU-360106PD
M85049/95-37A-A FSU-370106PD
M85049/95-61A-A FSU-610106PD
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
5
CROSS REFERENCE CHART
MIL-C-85528
Revised 5/07
Cage Code 04967
CROSS REFERENCE CHART MIL-C-85528
Fastener Specialty currently supplies all congurations to the
MIL-C-85528 and its variations.
M85528/1 M85528/2 M85528/3
M
85528/1-8 FSC/MD-8A M85528/2-3A FSU-3 M85528/3-3 FSS4-3
M85528/1-10 FSC/MD-10A M85528/2-6A FSU-6 M85528/3-6 FSS4-6
M85528/1-12 FSC/MD-12A M85528/2-7A FSU-10/7 M85528/3-7 FSS4-10
M85528/1-14 FSC/MD-14A M85528/2-8A FSU/MD-8A M85528/3-8 FSS4-8
M85528/1-16 FSC/MD-16A M85528/2-10A FSS1-10 M85528/3-10 FSS4-10
M85528/1-18 FSC/MD-18A M85528/2-10B FR-10 M85528/3-12 FSS4-12
M85528/1-20 FSC/MD-20A M85528/2-12A FSS1-12 M85528/3-14 FSS4-14
M85528/1-22 FSC/MD-22A M85528/2-12B FR-12 M85528/3-16 FSS4-16
M85528/1-24 FSC/MD-24A M85528/2-14A FSS1-14 M85528/3-18 FSS4-18
M85528/1-25 FSC/MD-25A M85528/2-14B FR-14 M85528/3-19 FSS4-14
M85528/2-16A FSS1-16 M85528/3-20 FSS4-20
M85528/2-16B FR-16 M85528/3-22 FSS4-22
M85528/2-18A FSS1-18 M85528/3-24 FSS4-24
M85528/2-18B FR-18 M85528/3-25 FSS4-25
M85528/2-19A FSU-14/19 M85528/3-27 FSS4-16
M85528/2-20A FSS1-20 M85528/3-28 FSS4-28
M85528/2-20B FR-20 M85528/3-32 FSS4-32
M85528/2-22A FSS1-22 M85528/3-36 FSS4-36
M85528/2-22B FR-22 M85528/3-37 FSS4-37
M85528/2-24A FR-24 M85528/3-61 FSS4-61
M85528/2-24B FSS1-24
M85528/2-25A FSU/MD-25A
M85528/2-27A FSU-16/27
M85528/2-28A FSU-28
M85528/2-32A FSU-32
M85528/2-36A FSU-36
M85528/2-37A FSU-37
M85528/2-61A FSU-61
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
6
ORDERING INFORMATION
Revised 5/07
Cage Code 04967
ORDERING INFORMATION
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
FSU
FSU/MD
FSC/MD
FR
FHA
FSS1
FSS2
FSS4
FSS6
FSS7
FSO
FS9
FSS11
FSUM
FSM1
FSSM4
FSD
FSIM
SERIES SHELL SIZEPAGE OPTIONS (SEE NOTE 1)
XXXX - XX XX
See column
under each
series
Example: FSU = Series
14 = Shell Size
01 = Stainless Nuts or Standoffs
06 = MIL-P-23377 Primer
F = Non Locking
Part No. FSU-140106F
Note 1: Add to number only when applicable.
Note 2: For special requirements with
metric nuts, contact factory.
01 Use corrosion resisting steel nuts
01N Use nylon locking insert stainless steel clinch nuts
01PD Dry film lube on passivated locking cres nut
01PF Passivated non-locking cres nut
01PZ Tiolube 460 low outgassing dry film lube on
passivated locking cres nut
01PZ1 Tiolube 1175
low outgassing dry film lube on
passivated locking cres nut
N Use nylon insert alloy steel clinch nuts, cadmium
plated per QQ-P-416
F
Non-locking nuts
X
Zinc-plated nuts, non-locking, steel
XL
Zinc-plated nuts, locking, steel
06
Use primer per MIL-P-23377 on retainer, available
by request.
07
Use primer MMS425 on retainer, available by
request.
09 Primer per MIL-P-23377 followed by
Topcoat
MIL-C-83286. (Contact factory for availability)
A
Delete Primer MMS425 on retainer. MMS425
primer is standard on FSU/MD and FSC/MD Series
retainers only. If desired on any others, add as “07.”
B Black anodize on retainer
C Clear anodize on retainer
7
GENERAL INFORMATION
Revised 5/07
Cage Code 04967
GENERAL INFORMATION
RETAINER MATERIAL
RETAINER FINISH
STANDARD NUTS OR STANDOFFS
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Type of material varies with each series. See specications.
2024-T3 Aluminum alloy (QQ-A-250/4)
6061-T6 Aluminum alloy (QQ-A-250/11)
Optional high temperature retainer material available.
Per MIL-C-5541 (Alodine is standard nish. If anodize is
desired, it must be requested at time of order.)
Per MIL-A-8625
Per MMS425 applied per P.S. 13375 (Primer is standard on
FSU/MD and FSC/MD Series only.)
Per MIL-P-23377 (Epoxy polyamide coating primer to be
applied after nut installation.)
Alodine
Anodize (Clear)
Primer (Blue/Green)
Primer (Yellow)
Nuts Steel, self-locking UNJC-3B, cadmium plated per QQ-P-416
plus dry lm lubricant. Molybdenum Disulde (MIL-L-46010).
Nuts meet MIL-N-25027 performance requirements.
Nuts Corrosion resistant steel, self-locking UNJC-3B or 6H-ISO metric,
cadmium plated per QQ-P-416 plus dry lm lubricant.
Molybdenum Disulde (MIL-L-46010). Nuts meet MIL-N-25027
performance requirements.
Standoffs Type 303 stainless steel, passivated per QQ-P-35
8
FSU SERIES
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Revised 5/07
Cage Code 04967
SPECIFICATIONS FSU SERIES
See pages 3 - 5
for applicable
MIL-C numbers
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
FSU-3 3 4.40 .625 .925 .641 .106/.166 .325
FSU-6 64.40 .469 .755 .366 .106/.166 .183
FSU-7 7 4.40 .719 1.019 .688 .106/.166 .433
FSU-8 8 4.40 .594 .880 .554 .106/.166 .308
FSU-10 10 4.40 .719 1.019 .688 .106/.166 .433
FSU-12 12 4.40 .812 1.098 .828 .106/.166 .526
FSU-14 14 4.40 .906 1.192 .953 .106/.166 .620
FSU-16 16 4.40 .969 1.255 1.094 .106/.166 .683
FSU-18 18 4.40 1.062 1.348 1.185 .106/.166 .776
FSU-19 19 4.40 .906 1.192 .953 .106/.166 .620
FSU-20 20 4.40 1.156 1.500 1.305 .106/.166 .865
FSU-22 22 4.40 1.250 1.593 1.428 .106/.166 .907
FSU-23 23 4.40 1.375 1.750 1.560 .106/.166 1.000
FSU-24 24 6.32 1.375 1.750 1.560 .123/.183 1.000
FSU-25 25 6.32 1.500 1.812 1.582 .123/.183 1.062
FSU-27 27 4.40 .969 1.255 1.094 .106/.166 .683
FSU-28 28 6.32 1.562 2.000 1.820 .123/.183 1.125
FSU-32 32 6.32 1.750 2.312 2.062 .123/.183 1.188
FSU-36 36 6.32 1.938 2.500 2.312 .123/.183 1.375
FSU-37 37 4.40 1.187 1.500 1.281 .106/.166 .874
FSU-4001 40 8.32 2.188 2.925 2.675 .128/.210 1.500
FSU-4801 48 10.32 2.625 3.250 2.950 .140/.180 1.975
FSU-61 61 4.40 1.437 1.812 1.594 .106/.166 1.062
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating are available.
* When ordering, add “01” to part number. Example: FSU-1801.
Part No. Shell
Size
T Thrd
unjc-3bA + .003 B + .015 C
+ .015
- .000 D E + .020
9
Revised 5/07
Cage Code 04967
FSU/MD SERIES
FSU/MD SERIES SPECIFICATIONS
FSU/MD-8 8 4.40 .594 .880 .570 .106/.166 .308
FSU/MD-10 10 4.40 .719 1.005 .700 .106/.166 .433
FSU/MD-12 12 4.40 .812 1.098 .820 .106/.166 .526
FSU/MD-14 14 4.40 .906 1.192 .945 .106/.166 .620
FSU/MD-16 16 4.40 .969 1.255 1.070 .106/.166 .683
FSU/MD-18 18 4.40 1.062 1.348 1.196 .106/.166 .776
FSU/MD-20 20 4.40 1.156 1.500 1.320 .106/.166 .812
FSU/MD-22 22 4.40 1.250 1.625 1.440 .106/.166 .906
FSU/MD-24 24 6.32 1.375 1.750 1.570 .123/.183 1.000
FSU/MD-25 25 6.32 1.500 1.891 1.658 .123/.183 1.125
FSU/MD-28 28 6.32 1.562 2.000 1.820 .123/.183 1.125
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .015 C
+ .015
- .000 D E + .000
- .030
T Thrd
unjc-3b
1. Retainer Material - .040 + .003 thick 6061-T6 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541 plus two (2) coats of MMS425 primer per
P.S. 13375. Should primer not be required, add “A” to part number.
Example: FSU/MD-24A
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating
are available.
* When ordering, add “01” to part number. Example: FSU/MD-2401.
See pages 3 - 5
for applicable
MIL-C numbers
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
10
FSC/MD SERIES
Revised 5/07
Cage Code 04967
SPECIFICATIONS FSC/MD SERIES
FSC/MD-8 8 4.40 .594 .880 .570 .106/.166
FSC/MD-10 10 4.40 .719 1.005 .700 .106/.166
FSC/MD-12 12 4.40 .812 1.098 .820 .106/.166
FSC/MD-14 14 4.40 .906 1.192 .945 .106/.166
FSC/MD-16 16 4.40 .969 1.255 1.070 .106/.166
FSC/MD-18 18 4.40 1.062 1.348 1.196 .106/.166
FSC/MD-20 20 4.40 1.156 1.500 1.320 .106/.166
FSC/MD-22 22 4.40 1.250 1.625 1.440 .106/.166
FSC/MD-24 24 6.32 1.375 1.750 1.570 .123/.183
FSC/MD-25 25 6.32 1.500 1.891 1.658 .123/.183
FSC/MD-28 28 6.32 1.562 2.000 1.820 .123/.183
1. Retainer Material - .040 + .003 thick 6061-T6 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541 plus two (2) coats of MMS425 primer per
P.S. 13375. Should primer not be required, add “A” to part number.
Example: FSC/MD-24A
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating
are available.
* When ordering, add “01” to part number. Example: FSC/MD-2401.
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
See pages 3 - 5
for applicable
MIL-C numbers
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
Part No. Shell
Size
T Thrd
unjc-3bA + .003 B + .015 C
+ .015
- .000 D
11
Revised 5/07
Cage Code 04967
FR SERIES
FR SERIES SPECIFICATIONS
FR-10 10 6.32 .812 1.187 .749 .123/.183 .433
FR-12 12 6.32 .938 1.312 .938 .123/.183 .526
FR-14 14 6.32 1.031 1.406 1.031 .123/.183 .620
FR-16 16 6.32 1.125 1.500 1.125 .123/.183 .683
FR-18 18 6.32 1.203 1.578 1.234 .123/.183 .776
FR-20 20 6.32 1.297 1.688 1.359 .123/.183 .865
FR-22 22 6.32 1.375 1.738 1.483 .123/.183 .907
FR-24 24 6.32 1.500 1.891 1.560 .123/.183 1.000
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .015 C
+ .015
- .000 D E + .020
T Thrd
unjc-3b
See pages 3 - 5
for applicable
MIL-C numbers
Note:
All dimensions are
symmetrical about
centerlines.
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant
coating are available.
* When ordering, add “01” to part number. Example: FR-1201.
12
FHA SERIES
Revised 5/07
Cage Code 04967
SPECIFICATIONS FHA SERIES
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
FHA-3 3 4.40 .625 .925 .320 .106/.166 .162
FHA-6 64.40 .469 .755 .183 .106/.166 .091
FHA-7 7 4.40 .719 1.019 .344 .106/.166 .216
FHA-8 8 4.40 .594 .880 .277 .106/.166 .154
FHA-10 10 4.40 .719 1.019 .344 .106/.166 .216
FHA-12 12 4.40 .812 1.098 .414 .106/.166 .263
FHA-14 14 4.40 .906 1.192 .476 .106/.166 .310
FHA-16 16 4.40 .969 1.255 .546 .106/.166 .341
FHA-18 18 4.40 1.062 1.348 .592 .106/.166 .388
FHA-19 19 4.40 .906 1.192 .476 .106/.166 .310
FHA-20 20 4.40 1.156 1.500 .652 .106/.166 .432
FHA-22 22 4.40 1.250 1.593 .714 .106/.166 .453
FHA-24 24 6.32 1.375 1.750 .780 .123/.183 .500
FHA-25 25 6.32 1.500 1.812 .791 .123/.183 .531
FHA-27 27 4.40 .969 1.255 .547 .106/.166 .341
FHA-28 28 6.32 1.562 2.000 .910 .123/.183 .562
FHA-32 32 6.32 1.750 2.312 1.031 .123/.183 .594
FHA-36 36 6.32 1.938 2.500 1.156 .123/.183 .687
FHA-37 37 4.40 1.187 1.500 .640 .106/.166 .437
FHA-61 61 4.40 1.437 1.812 .797 .106/.166 .531
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating
are available.
* When ordering, add “01 “to part number. Example: FHA-301, FHA-6101
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .015 C
+ .010
- .000 D E
T Thrd
unjc-3b
+ .000
- .010
13
Revised 5/07
Cage Code 04967
FSS1 SERIES
FSS1 SERIES SPECIFICATIONS
FSS1-8 8 4.40 .594 .886 .550 .106/.166 .308
FSS1-10 10 4.40 .719 1.019 .720 .106/.166 .433
FSS1-12 12 4.40 .812 1.104 .855 .106/.166 .530
FSS1-14 14 4.40 .906 1.198 .984 .106/.166 .624
FSS1-16 16 4.40 .969 1.280 1.094 .106/.166 .687
FSS1-18 18 4.40 1.062 1.406 1.220 .106/.166 .780
FSS1-20 20 4.40 1.156 1.535 1.345 .106/.166 .874
FSS1-22 22 4.40 1.250 1.665 1.478 .106/.166 .968
FSS1-24 24 6.32 1.375 1.785 1.595 .123/.183 1.031
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating
are available.
* When ordering, add “01” to part number. Example: FSSI-1801.
See pages 3 - 5
for applicable
MIL-C numbers
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .010 C
+ .010
- .000 D E
T Thrd
unjc-3b
+ .000
- .010
14
FSS2 SERIES
Revised 5/07
Cage Code 04967
SPECIFICATIONS FSS2 SERIES
Note:
All dimensions are
symmetrical about
centerlines.
FSS2- 8 8 6.32 .734 1.093 .697 .123/.183 .375
FSS2-10 10 6.32 .812 1.171 .789 .123/.183 .453
FSS2-12 12 6.32 .938 1.296 .967 .123/.183 .579
FSS2-14 14 6.32 1.031 1.390 1.099 .123/.183 .672
FSS2-16 16 6.32 1.125 1.484 1.231 .123/.183 .766
FSS2-18 18 6.32 1.203 1.562 1.342 .123/.183 .844
FSS2-20 20 6.32 1.297 1.656 1.437 .123/.183 .938
FSS2-22 22 6.32 1.375 1.734 1.531 .123/.183 1.016
FSS2-24 24 6.32 1.500 1.859 1.656 .123/.183 1.141
FSS2-25 25 6.32 1.438 1.792 1.530 .123/.183 1.080
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .010 C
+ .010
- .000 D E
T Thrd
unjc-3b
+ .000
- .010
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating
are available.
* When ordering, add “01” to part number. Example: FSS2-2401
15
Revised 5/07
Cage Code 04967
FSS4 SERIES
FSS4 SERIES SPECIFICATIONS
FSS4-3 3 4.40 .625 .925 .320 .106/.166 .300
FSS4-6 64.40 .469 .766 .183 .106/.166 .298
FSS4-7 7 4.40 .719 1.016 .359 .106/.166 .298
FSS4-8 8 4.40 .594 .891 .277 .106/.166 .296
FSS4-10 10 4.40 .719 1.016 .359 .106/.166 .298
FSS4-12 12 4.40 .812 1.109 .425 .106/.166 .296
FSS4-14 14 4.40 .906 1.203 .492 .106/.166 .296
FSS4-16 16 4.40 .969 1.266 .547 .106/.166 .298
FSS4-18 18 4.40 1.062 1.390 .610 .106/.166 .328
FSS4-19 19 4.40 .906 1.203 .492 .106/.166 .296
FSS4-20 20 4.40 1.156 1.510 .672 .106/.166 .354
FSS4-22 22 4.40 1.250 1.640 .739 .106/.166 .390
FSS4-24 24 6.32 1.375 1.760 .797 .123/.183 .386
FSS4-25 25 6.32 1.500 1.859 .845 .123/.183 .358
FSS4-27 27 4.40 .969 1.266 .547 .106/.166 .298
FSS4-28 28 6.32 1.562 2.000 .920 .123/.183 .438
FSS4-32 32 6.32 1.750 2.312 1.058 .123/.183 .562
FSS4-36 36 6.32 1.938 2.500 1.170 .123/.183 .562
FSS4-37 37 4.40 1.187 1.500 .670 .106/.166 .314
FSS4-61 61 4.40 1.437 1.812 .812 .106/.166 .376
See pages 3 - 5
for applicable
MIL-C numbers
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating
are available.
* When ordering, add “01” to part number. Example: FSS4-2401
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .015 C
+ .010
- .000 D E
T Thrd
unjc-3b
+ .010
- .000
16
FSS6 SERIES
Revised 5/07
Cage Code 04967
SPECIFICATIONS FSS6 SERIES
Note:
All dimensions are
symmetrical about
centerlines.
FSS6-2801 28 8.32 1.562 2.000 1.820 .120/.210 1.125
FSS6-3201 32 8.32 1.750 2.312 2.062 .120/.210 1.188
FSS6-3601 36 8.32 1.938 2.500 2.312 .120/.210 1.375
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Corrosion resistant steel, cadmium plated followed by a solid dry
lm lubricant. Nuts meet performance requirements of MIL-N-25027 specication.
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .015 C
+ .015
- .000 D E + .020
T Thrd
unjc-3b
17
Revised 5/07
Cage Code 04967
FSS7 SERIES
FSS7 SERIES SPECIFICATIONS
FSS7-801 8 4.40 .594 .880 .554 .106/.166 .308 1.130 .440 .207
FSS7-1001 10 4.40 .719 1.019 .688 .106/.166 .433 1.269 .509 .207
FSS7-1201 12 4.40 .812 1.098 .828 .106/.166 .526 1.348 .409 .189
FSS7-1401 14 4.40 .906 1.192 .953 .106/.166 .620 1.442 .436 .186
FSS7-1601 16 4.40 .969 1.255 1.094 .106/.166 .683 1.505 .388 .190
FSS7-1801 18 4.40 1.062 1.348 1.185 .106/.166 .776 1.598 .374 .206
FSS7-2001 20 4.40 1.156 1.500 1.305 .106/.166 .865 1.788 .425 .219
FSS7-2201 22 4.40 1.250 1.593 1.428 .106/.166 .907 1.891 .447 .229
FSS7-2401 24 4.40 1.375 1.750 1.560 .106/.166 1.000 2.000 .500 .219
FSS7-2501 25 4.40 1.500 1.840 1.580 .106/.166 1.062 2.050 .550 .215
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Corrosion resistant steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
4. Stud - Corrosion resistant steel passivated per QQ-P-35 threads 4-40 class 2A per MIL-S-7742.
* When ordering, you may specify right hand or left hand stud installation. With the assembled Nut Ring laying
at (nuts turned upward) and the open end pointing toward you, right hand is on right, left on left. Specify as
RH (right hand) or LH (left hand). (Exceptions are shell sizes 8 and 10 which are placed in the center only.)
Right hand shown.
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .015 C
+ .015
- .000 D
E + .010
T Thrd
unjc-3b
F + .015 G + .010 H + .010
18
FSO SERIES
Revised 5/07
Cage Code 04967
SPECIFICATIONS FSO SERIES
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
FSO-1001 10 4.40 .719 1.019 .688 .430/.456 .433
FSO-1201 12 4.40 .812 1.098 .828 .430/.456 .526
FSO-1401 14 4.40 .906 1.192 .953 .430/.456 .620
FSO-1601 16 4.40 .969 1.255 1.094 .430/.456 .683
FSO-1801 18 4.40 1.062 1.348 1.185 .430/.456 .776
FSO-2001 20 4.40 1.156 1.500 1.305 .430/.456 .865
FSO-2201 22 4.40 1.250 1.593 1.428 .430/.456 .907
FSO-2401 24 4.40 1.375 1.750 1.560 .430/.456 1.000
1. Retainer Material - .063 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Standoffs - Corrosion resistant steel, passivated per QQ-P-35.
Locking feature available upon request. Add “L” to part number.
* Standoffs with other “D” dimensions available. When ordering, add desired “D” dimension.
Example: FSO-1201-.375
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .010 C
+ .010
- .000 D *E + .010
T Thrd
unjc-3b
19
Revised 5/07
Cage Code 04967
FS9 SERIES
FS9 SERIES SPECIFICATIONS
FS9-11 11 4.40 .750 1.045 .770 .106/.166 .460
FS9-13 13 4.40 .843 1.138 .902 .106/.166 .550
FS9-15 15 4.40 .968 1.263 1.075 .106/.166 .678
FS9-17 17 4.40 1.015 1.310 1.145 .106/.166 .725
FS9-19 19 4.40 1.140 1.495 1.322 .106/.166 .850
FS9-23 23 4.40 1.281 1.700 1.522 .106/.166 .990
FS9-25 25 6.32 1.392 1.790 1.614 .123/.183 1.031
FS9-29 29 6.32 1.568 2.062 1.885 .123/.183 1.210
FS9-33 33 6.32 1.734 2.290 2.093 .123/.183 1.380
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant coating
are available.
* When ordering, add “01” to part number. Example: FS9-1501
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size A + .003 B + .010 C
+ .010
- .000 D E + .010
T Thrd
unjc-3b
20
FSS11 SERIES (COAXIAL)
Revised 5/07
Cage Code 04967
SPECIFICATIONS FSS11 SERIES
Note:
All dimensions
are symmetrical
about centerlines.
FSS11-201 2.56 .340 .570 .200 .100/.125 .162
FSS11-401 2.56 .500 .730 .442 .100/. 125 .240
FSS11-7 4.40 .500 .730 .442 .106/. 166 .240
FSS11-8 4.40 .531 .750 .448 .106/. 166 .260
FSS11-13 4.40 .718 1.000 .718 .106/. 166 .322
FSS11-1601 2.56 .906 1.312 .801 .100/.125 .520
FSS11-18 6.32 1.187 1.550 1.270 .123/.183 .734
1. Retainer Material - .040 + .003 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
* Optional corrosion resistant steel nuts, cadmium plated plus dry lm lubricant.
* When ordering, add “01” to part number. Example: FSS11-701
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. A + .003 B + .015 C
+ .015
- .001 D E + .020
T Thrd
unjc-3b
21
Revised 5/07
Cage Code 04967
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
FSUM SERIES (METRIC)
FSUM-601
6M3 x 0.5
11.91
19.18
9.26
2.7/4.2
4.65
FSUM-701
7 M3 x 0.5
18.26
25.88
17.47
2.7/4.2
11.00
FSUM-801
8 M3 x 0.5
15.09
22.35
14.07
2.7/4.2
7.82
FSUM-1001
10 M3 x 0.5
18.26
25.88
17.47
2.7/4.2
11.00
FSUM-1201
12 M3 x 0.5
20.62
27.88 21.03
2.7/4.2
13.36
FSUM-1401
14 M3 x 0.5 23.01
30.28
24.20
2.7/4.2
15.75
FSUM-1601
16 M3 x 0.5
24.61
31.87
27.78
2.7/4.2
17.34
FSUM-1801
18 M3 x 0.5
26.97
34.24 30.10
2.7/4.2
19.71
FSUM-1901
19 M3 x 0.5
23.01
30.28
24.21
2.7/4.2
15.75
FSUM-2001
20 M3 x 0.5
29.36
38.10
33.15
2.7/4.2
21.97
FSUM-2201
22 M3 x 0.5
31.75 40.46
36.27
2.7/4.2
23.04
FSUM-2301
23 M3 x 0.5
34.93 44.45
39.62
2.7/4.2
25.40
FSUM-2701
27 M3 X 0.5
24.61
31.87
27.78
2.7/4.2
17.35
FSUM-2801
28 M4 x 0.7
39.67
50.80
46.23
3.5/5.0
28.58
FSUM-28501
28 M5 x 0.8
39.67
50.80 46.23
4.0/5.5
28.58
FSUM-2801S
28 M3 x 0.5
39.67 50.80 46.23
2.7/4.2
28.58
FSUM-3201
32 M4 x 0.7
44.45 58.73
52.37
3.5/5.0
30.18
FSUM-32501
32 M5 x 0.8
44.45
58.73
52.37
4.0/5.5
30.18
FSUM-3601
36 M4 x 0.7
49.23
63.50 58.72
3.5/5.0
34.93
FSUM-36501
36 M5 x 0.8
49.23
63.50
58.72
4.0/5.5
34.93
FSUM-3701
37 M3 x 0.5
30.15
38.10
32.54
2.7/4.2
22.20
FSUM-6101
61 M3 x 0.5
36.50 46.02 40.49
2.7/4.2
26.97
FSUM-4001
40 M4 X 0.7
55.58
74.30
67.95
3.5/5.0
38.10
FSUM-40501
40 M5 x 0.8
55.58
74.30
67.95
4.0/5.5
38.10
FSUM-4801
48 M4 x 0.7
66.68
82.55
74.93
3.5/5.0
50.17
FSUM-48501
48 M5 x 0.8
66.68
82.55
74.93
4.0/5.5
50.17
FSUM SPECIFICATIONS
Note:
All dimensions
are in millimeters
and symmetrical
about centerlines.
1. Retainer Material - 1.02 + .08 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Corrosion resistant steel, cadmium plated followed by a solid dry lm
lubricant. Nuts meet performance requirements of MIL-N-25027 specication.
Part No. Shell
Size T Thrd A + .08 B + .4 C
+ .38
- .00 D E + .5
22
FSM1 SERIES (METRIC)
Revised 5/07
Cage Code 04967
Note:
All dimensions
are in millimeters
and symmetrical
about centerlines.
SPECIFICATIONS FSM1 SERIES
FSM1-701
7 M3 x 0.5
15.09
22.35
14.48
2.7/4.2
7.82
FSM1-901
9 M3 x 0.5
18.26
25.53
17.78
2.7/4.2
11.00
FSM1-1101
11 M3 x 0.5
20.62 27.89 20.83
2.7/4.2
13.36
FSM1-1301
13 M3 x 0.5
23.01
30.28
24.00
2.7/4.2
15.75
FSM1-1501
15 M3 x 0.5
24.61
31.88 27.18
2.7/4.2
17.35
FSM1-1701
17 M3 x 0.5
26.97
34.24 30.38
2.7/4.2
19.71
FSM1-1901
19 M3 x 0.5
29.36
38.10 33.53
2.7/4.2
20.62
FSM1-2101
21 M3 x 0.5
31.75
41.27 36.58
2.7/4.2
23.01
FSM1-2301
23 M3 x 0.5
34.92
44.45 39.88
2.7/4.2
25.40
FSM1-2501
25 M3 x 0.5
38.10
48.03
42.11
2.7/4.2
28.57
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
1. Retainer Material - 1.02 + .08 thick 6061-T6 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Corrosion resistant steel, cadmium plated followed by a solid dry lm
lubricant. Nuts meet performance requirements of MIL-N-25027 specication.
Part No. Shell
Size T Thrd A + .08 B + .38 D E + .76
C + .38
23
Revised 5/07
Cage Code 04967
FSSM4 SERIES (METRIC)
FSSM4 SERIES SPECIFICATIONS
Note:
All dimensions
are in millimeters
and symmetrical
about centerlines.
FSSM4- 301
3 M3 x 0.5
15.88
23.50 8.13
2.7/4.2
7.62
FSSM4- 601
6M3 x 0.5
11.91
19.46
4.65
2.7/4.2
7.57
FSSM4- 701
7 M3 x 0.5
18.26
25.81
9.12
2.7/4.2
7.57
FSSM4- 801
8 M3 x 0.5
15.09
22.63
7.04
2.7/4.2
7.52
FSSM4-1001
10 M3 x 0.5
18.26
25.81
9.12
2.7/4.2
7.57
FSSM4-1201
12 M3 x 0.5
20.62
28.17
10.80
2.7/4.2
7.52
FSSM4-1401
14 M3 x 0.5
23.01
30.56
12.50
2.7/4.2
7.52
FSSM4-1601
16 M3 x 0.5
24.61
32.16
13.89
2.7/4.2
7.57
FSSM4-1801
18 M3 x 0.5
26.97
35.31
15.49
2.7/4.2
8.33
FSSM4-1901
19 M3 x 0.5
23.01
30.56
12.50
2.7/4.2
7.52
FSSM4-2001
20 M3 x 0.5
29.36
38.35
17.07
2.7/4.2
8.99
FSSM4-2201
22 M3 x 0.5
31.75
41.66
18.77
2.7/4.2
9.90
FSSM4-2401
24 M3 x 0.5
34.93
44.70
20.24
2.7/4.2
9.80
FSSM4-2501
25 M3 x 0.5
38.10 47.22
21.46
2.7/4.2
9.09
FSSM4-2701
27 M3 x 0.5
24.61
32.16
13.89
2.7/4.2
7.57
FSSM4-2801
28 M3 x 0.5
39.67 50.80
23.37
2.7/4.2
11.13
FSSM4-3201
32 M3 x 0.5
44.45
58.72
26.87
2.7/4.2
14.27
FSSM4-3601
36 M3 x 0.5
49.23
63.50 29.72
2.7/4.2
14.27
FSSM4-3701
37 M3 x 0.5
30.15 38.10
17.02
2.7/4.2
7.98
FSSM4-6101
61 M3 x 0.5
36.50
46.02 20.62
2.7/4.2
9.55
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Part No. Shell
Size T Thrd A + .08 B + .25 C
+ .25
- .00 D E + .25
1. Retainer Material - 1.02 + .08 thick 2024-T3 aluminum alloy
2. Retainer Finish - Alodine per MIL-C-5541
3. Nut, Self-Locking - Corrosion resistant steel, cadmium plated followed by a solid dry lm
lubricant. Nuts meet performance requirements of MIL-N-25027 specication.
24
FSD SERIES
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Revised 5/07
Cage Code 04967
PATENT NUMBER 312,712
FSD-1 E/09 4.40 1.270 .984 .674 .430 .285
FSD-2 A/15 4.40 1.598 1.312 1.002 .430 .285
FSD-3 B/25 4.40 2.138 1.852 1.542 .430 .285
FSD-4 C/37 4.40 2.786 2.500 2.190 .430 .285
FSD-5 D/50 4.40 2.692 2.406 2.088 .511 .340
Note:
All dimensions are
symmetrical about
centerlines.
Metric threads are
available for this
series. Contact
the factory for
information.
*OPTIONAL NUTS
FSD SERIES PATENT NUMBER 312,712 SPECIFICATIONS
1. Corrosion Resisting - Steel nuts, cadmium plated plus dry lm lubricant.
When ordering, add “01” to part number. Example: FSD-301
2. Nylon Insert - Steel clinch nuts, cadmium plated per QQ-P-416.
When ordering, add “N” to part number. Example: FSD-3N
Nylon Insert - Corrosion resistant steel clinch nuts, passivated per QQ-P-35.
When ordering, add “01N” to part number. Example: FSD-301N
3. Metric - Corrosion resistant, cadmium plated plus dry lm lubricant.
When ordering, add “M-01” to part number. Example: FSD-3 would change to FSDM-301
1. Retainer Material - ZA8 (technical data sheet available upon request)
2. Retainer Finish - Chromate nish per MIL-C-17711
Retainer with Steel Nuts - Yellow chromate nish
Retainer with Corrosion Resistant Nuts - Clear chromate nish
3. Nut, Self-Locking - Steel, cadmium plated followed by a solid dry lm lubricant.
Nuts meet performance requirements of MIL-N-25027 specication.
Please contact Fastener Specialty for information on the FSDC Series
commercial version D-sub retainer.
Part No. Shell
Size A + .015 B + .005 C+ .010 D+ .010 E + .005
T Thrd
unjc-3b
Application: To be used to mount MIL-C-24308 D-subminiature connectors.
25
SPECIFICATIONS FSIM SERIES
Revised 5/07
Cage Code 04967
FSIM SERIES
FSIM-01 3.125 6-32 2.475 3.360 3.160 .123/.183 22° .25 x 45°
FSIM-02 3.125 6-32 2.475 3.360 3.160 .123/.183 22° .25 x 45°
FSIM-03 2.250 6-32 1.865 2.530 2.290 .123/.183 15° .25 x 45°
FSIM-04 2.250 6-32 1.865 2.530 2.290 .123/.183 15° .25 x 45°
Note: All dimensions are symmetrical about centerlines.
Kit Includes: Instructions, installation and mounting hardware.
-01 & -03 CONFIGURATION
-02 & -04 CONFIGURATION
FAA/PMA# PQ1026SW
Lightweight brackets with self-wrenching, self-locking
press nuts.
Eliminates the risk of loose hardware behind the
panel.
Quick and easy installation.
Another Innovation From The Aerospace
Electronics Mounting Specialist!
www.fastenerspecialty.com
info@fastenerspecialty.com
TO PLACE AN ORDER DIAL: (972) 988-0064
TO FAX AN ORDER DIAL: (972) 660-3153
Material:
1. Retainer - 6061-T6 Aluminum, .040 THK
2. Pressnut - Self-locking, Stainless Steel, meet MIL-N-45938.
3. Mounting Screws - Stainless Steel - 300 Series.
Finish:
1. Retainer - Alodine per MIL-C-5541.
2. Pressnut - CAD per QQ-P-416 followed by dry lm lube per MIL-L-46010.
3. Mounting Screws - Black Oxide.
Note: All FSIM kits are available with optional Brass Screws with nylon locking patch and free
spinning pressnuts. Add “BN” to part number. Example: FSIM-01BN
Part No. Shell
Size A + .003 B + .015 C
+ .015
- .000 D F + .5°
T Thrd
unjc-3bCH
26
NOTES