DESCRIPTION
If you have an 8mm linear rail, you'll want to give it a bit of guidance and support to help it
through the day. Sometimes a good word and a pat on the back is all you need, but when that's
not enough, use a pair of these aluminum cast rail supports!
Usable with any 8mm linear guide, you can simply slide the rail through, then tighten the clamp
screw at the top to fix it in place. Then use up to 6mm diameter bolts to attach them. If you need
to disassemble or otherwise repair your robot or machine, its easy to open up the clamp and
remove the rail.
Each item comes with one support, so chances are you'll want to buy two of these to support a
single railing. We have a bunch of bearings and platforms that you may want to use with an
8mm based rail system so check out our CNC category