LQA20T300C, LQA20B300C QspeedTM Family 300 V, 20 A Q-Series Common-Cathode Diode Product Summary IF(AVG) per diode VRRM QRR (Typ at 125 C) IRRM (Typ at 125 C) Softness tb/ta (Typ at 125 C) 10 300 38 2.3 0.7 General Description A V nC A This device has the lowest QRR of any 300 V Silicon diode. Its recovery characteristics increase efficiency, reduce EMI and eliminate snubbers. Applications Pin Assignment * AC/DC and DC/DC output rectification * Output & freewheeling diodes * Motor drive circuits * DC-AC inverters Features TO-220AB TO-263AB LQA20T300C LQA20B300C A1 A2 K RoHS Compliant Package uses Lead-free plating and Green mold compound.Halogen free per IEC 61249-2-21. * Low QRR, Low IRRM, Low tRR * High dIF/dt capable (1000A/s) * Soft recovery Benefits * Increases efficiency * Eliminates need for snubber circuits * Reduces EMI filter component size & count * Enables extremely fast switching Absolute Maximum Ratings Absolute maximum ratings are the values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Symbol Parameter VRRM IF(AVG) Peak repetitive reverse voltage Average forward current IFSM IFSM TJ TSTG Non-repetitive peak surge current Non-repetitive peak surge current Maximum junction temperature Storage temperature Lead soldering temperature Power dissipation PD Conditions Per Diode, TJ = 150 C, TC = 115 C Per Device, TJ = 150 C, TC = 115 C 60 Hz, 1/2 cycle 1/2 cycle of t = 28 s Sinusoid, TC = 25 C Leads at 1.6mm from case, 10 sec TC = 25 C Rating Units 300 10 20 80 350 150 -55 to 150 300 52 V A A A A C C C W Rating Units 62 2.4 1.2 C/W C/W C/W Thermal Resistance Symbol Resistance from: Conditions RJA Junction to ambient RJC Junction to case TO-220AB (only) Per Diode Per Device www.powerint.com January 2011 LQA20T300C, LQA20B300C Electrical Specifications at TJ= 25 C (unless otherwise specified) Symbol Parameter Conditions Min Typ Max Units - 0.32 1.58 1.36 33 25 1.9 - A mA V V pF - 12.6 24 10.2 38 1.3 2.3 16 1.7 - ns ns nC nC A A - 0.7 0.7 - DC Characteristics per diode IR Reverse current per diode VF Forward voltage per diode CJ Junction capacitance per diode VR = 300 V, TJ = 25 C VR = 300 V, TJ = 125 C IF = 10 A, TJ = 25 C IF = 10 A, TJ = 150 C VR = 10 V, 1 MHz Dynamic Characteristics per diode tRR Reverse recovery time, per diode dIF/dt =200 A/s VR=200, IF=10 A QRR Reverse recovery charge, per diode dIF/dt =200 A/s VR=200, IF=10 A IRRM Maximum reverse recovery current, per diode dIF/dt =200 A/s VR=200, IF=10 A TJ=25 C TJ=125 C TJ=25 C TJ =125 C TJ =25 C TJ=125 C S t Softness per diode= b dIF/dt =200 A/s VR=200, IF=10 A TJ =25 C TJ=125 C ta Note to component engineers: Q-Series diodes employ Schottky technologies in their design and construction. Therefore, component engineers should plan their test setups to be similar to traditional Schottky test setups. (For further details, see application note AN-300.) VR D1 DUT L1 tRR IF dIF/dt ta 15V Pulse generator tb + Rg Q1 0 0.1xIRRM IRRM Figure 1. Reverse Recovery Definitions Figure 2. Reverse Recovery Test Circuit 2 www.powerint.com Rev 1.5 01/11 LQA20T300C, LQA20B300C Electrical Specifications at TJ= 25 C (unless otherwise specified) 20 1.0 18 0.9 16 0.7 0.6 12 10 Tj=25C 8 IF (A) IF (A) Tj=125C 0.8 Tj=125C 14 0.5 0.4 6 0.3 4 0.2 2 0.1 0 Tj=25C 0.0 0.0 0.5 1.0 1.5 2.0 0.0 0.1 0.2 0.3 0.4 VF (V) 0.6 0.7 0.8 0.9 1.0 Figure 4. Typical IF vs VF Figure 3. Typical IF vs VF 120 30 100 25 80 20 IF(AV) (A) C j (pF) 0.5 VF (V) 60 15 40 10 20 5 0 0 0 20 40 60 80 100 120 140 160 25 180 50 75 100 125 150 o Case Temperature, TC ( C) VR (V) Figure 6. DC Current Derating Curve Figure 5. Typical Cj vs VR 30 80 70 dIF /dt=200A/us 25 20 dIF /dt=500A/us 50 tRR (ns) QRR (nC) 60 40 30 dIF /dt=500A/us 10 dIF /dt=200A/us 20 15 5 10 0 0 0 2 4 6 8 10 12 IF (A) Figure 7. Typical QRR vs IF at Tj=125 C 14 0 2 4 6 8 10 12 14 I F (A) Figure 8. Typical tRR vs IF at Tj=125 C 3 Rev 1.5 01/11 www.powerint.com LQA20T300C, LQA20B300C 60 50 IF(PEAK) (A) P (W) 40 30 20 10 0 25 50 75 100 125 150 duty cycle=10% 50 45 40 35 30 25 20 15 10 5 0 duty cycle=30% duty cycle=50% DC 25 o Case Temperature, TC ( C) 50 75 100 T C(C) 125 150 Figure 10. IF(Peak) vs TC, f=70 kHz Figure 9. Power Derating Curve LQA20x300C 1 D= 0.5 D = 0.3 D= 0.1 0.1 Zth(j-c)/Rth(j-c) D= 0.05 D= 0.02 D= 0.01 0.01 D=0.005 D=0.002 Single Pulse 0.001 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 t1(sec) Figure 11. Normalized Maximum Transient Thermal Impedance 4 www.powerint.com Rev 1.5 01/11 LQA20T300C, LQA20B300C Dimensional Outline Drawings TO-220AB A E Q oP D D1 L1 b2 L b c e e1 Millimeters A1 A2 Dim MIN MAX A 4.32 4.70 A1 1.11 1.38 A2 2.59 2.79 b 0.77 1.00 b2 1.23 1.36 C 0.34 0.47 D 14.71 15.75 D1 9.05 9.25 E 9.96 10.36 e 2.44 2.64 e1 4.98 5.18 L 12.70 14.22 L1 - 3.90 OP 3.71 3.96 Q 2.54 2.90 Mechanical Mounting Method Maximum Torque / Pressure specification Screw through hole in package tab Clamp against package body 1 Newton Meter (nm) or 8.8 inch-pounds (lb-in) 12.3 kilogram-force per square centimeter (kgf/cm2) or 175 lbf/in2 Millimeters TO-263AB Dim MIN MAX A 4.40 4.70 A1 0.00 0.25 A2 2.59 2.79 b 0.77 0.90 b2 1.23 1.36 c2 1.22 1.32 D 9.05 9.25 E 10.06 10.26 e 2.54 BSC 2.54 BSC H 14.70 15.50 L 2.00 2.60 L1 1.17 1.40 L2 - 1.75 L3 0.25 BSC 0.25 BSC L4 2.00 BSC 2.00 BSC 0 8 1 5 9 2 1 5 5 Rev 1.5 01/11 www.powerint.com LQA20T300C, LQA20B300C Soldering time and temperature: This product has been designed for use with hightemperature, lead-free solder. The component leads can be subjected to a maximum temperature of 300 C, for up to 10 seconds. See Application Note AN-303, for more details. Ordering Information Part Number Package Packing LQA20T300C LQA20B300C TO-220AB TO-263AB 50 units/tube 800 units/reel The information contained in this document is subject to change without notice. 6 www.powerint.com Rev 1.5 01/11 LQA20T300C, LQA20B300C Revision 1.4 1.5 Notes Released by Qspeed Converted to Power Integrations Document Date 06/10 01/11 7 Rev 1.5 01/11 www.powerint.com LQA20T300C, LQA20B300C For the latest updates, visit our website: www.powerint.com Power Integrations reserves the right to make changes to its products at any time to improve reliability or manufacturability. Power Integrations does not assume any liability arising from the use of any device or circuit described herein. POWER INTEGRATIONS MAKES NO WARRANTY HEREIN AND SPECIFICALLY DISCLAIMS ALL WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. PATENT INFORMATION The products and applications illustrated herein (including transformer construction and circuits external to the products) may be covered by one or more U.S. and foreign patents, or potentially by pending U.S. and foreign patent applications assigned to Power Integrations. A complete list of Power Integrations' patents may be found at www.powerint.com. Power Integrations grants its customers a license under certain patent rights as set forth at http://www.powerint.com/ip.htm. The PI Logo, TOPSwitch, TinySwitch, LinkSwitch, DPA-Switch, PeakSwitch, CAPZero, SENZero, LinkZero, HiperPFS, HiperTFS, Qspeed, EcoSmart, Clampless, E-Shield, Filterfuse, StackFET, PI Expert and PI FACTS are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. (c)Copyright 2011 Power Integrations, Inc. Power Integrations Worldwide Sales Support Locations WORLD HEADQUARTERS 5245 Hellyer Avenue San Jose, CA 95138, USA. Main: +1-408-414-9200 Customer Service: Phone: +1-408-414-9665 Fax: +1-408-414-9765 e-mail: usasales@powerint.com GERMANY Rueckertstrasse 3 D-80336, Munich Germany Phone: +49-89-5527-3911 Fax: +49-89-5527-3920 e-mail: eurosales@powerint.com JAPAN Kosei Dai-3 Building 2-12-11, Shin-Yokohama, Kohoku-ku, Yokohama-shi, Kanagawa 222-0033 Japan Phone: +81-45-471-1021 Fax: +81-45-471-3717 e-mail: japansales@powerint.com TAIWAN 5F, No. 318, Nei Hu Rd., Sec. 1 Nei Hu District Taipei 114, Taiwan R.O.C. Phone: +886-2-2659-4570 Fax: +886-2-2659-4550 e-mail: taiwansales@powerint.com CHINA (SHANGHAI) Rm 1601/1610, Tower 1 Kerry Everbright City No. 218 Tianmu Road West Shanghai, P.R.C. 200070 Phone: +86-021-6354-6323 Fax: +86-021-6354-6325 e-mail: chinasales@powerint.com INDIA th #1, 14 Main Road Vasanthanagar Bangalore-560052 India Phone: +91-80-4113-8020 Fax: +91-80-4113-8023 e-mail: indiasales@powerint.com KOREA RM 602, 6FL Korea City Air Terminal B/D, 159-6 Samsung-Dong, Kangnam-Gu, Seoul, 135-728 Korea Phone: +82-2-2016-6610 Fax: +82-2-2016-6630 e-mail: koreasales@powerint.com EUROPE HQ 1st Floor, St. James's House East Street, Farnham Surrey GU9 7TJ United Kingdom Phone: +44 (0) 1252-730-141 Fax: +44 (0) 1252-727-689 e-mail: eurosales@powerint.com CHINA (SHENZHEN) th Rm A, B & C 4 Floor, Block C, Electronics Science and Technology Building 2070 Shennan Zhong Road Shenzhen, Guangdong, P.R.C. 518031 Phone: +86-755-8379-3243 Fax: +86-755-8379-5828 e-mail: chinasales@powerint.com ITALY Via De Amicis 2 20091 Bresso MI Italy Phone: +39-028-928-6000 Fax: +39-028-928-6009 e-mail: eurosales@powerint.com SINGAPORE 51 Newton Road, #19-01/05 Goldhill Plaza Singapore, 308900 Phone: +65-6358-2160 Fax: +65-6358-2015 e-mail: singaporesales@powerint.com APPLICATIONS HOTLINE World Wide +1-408-414-9660 APPLICATIONS FAX World Wide +1-408-414-9760 8 www.powerint.com Rev 1.5 01/11