VS-1N1...A, VS-1N36..A Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 1Document Number: 93493
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Medium Power Silicon Rectifier Diodes, (Stud Version), 12 A
FEATURES
Voltage ratings from 50 V to 1000 V
High surge capability
Low thermal impedance
High temperature rating
Can be supplied as JAN and JAN-TX devices in
accordance with MIL-S-19500/260
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
JEDEC® registered values are in bold
ELECTRICAL SPECIFICATIONS
Notes
JEDEC® registered values are in bold
Basic part number indicates cathode to case; for anode to case, add “R” to part number, e.g., 1N1199RA
PRIMARY CHARACTERISTICS
IF(AV) 12 A
Package DO-4 (DO-203AA)
Circuit configuration Single
DO-4 (DO-203AA)
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IF(AV)
12 A
TC150 °C
IFSM
50 Hz 230 A
60 Hz 240
I2t50 Hz 260 A2s
60 Hz 240
TJ-65 to +200 °C
VRRM Range 50 to 1000 V
VOLTAGE RATINGS
TYPE NUMBER
VRRM, MAXIMUM
REPETITIVE PEAK
REVERSE VOLTAGE
(TC = -65 °C TO 200 °C)
V
VR(RMS), MAXIMUM RMS
REVERSE VOLTAGE
(TC = -65 °C TO 200 °C)
V
VRSM, MAXIMUM
NON-REPETITIVE PEAK
REVERSE VOLTAGE
(TC = -65 °C TO 200 °C)
V
VRM, MAXIMUM DIRECT
REVERSE VOLTAGE
(TC = -65 °C TO 200 °C)
V
VS-1N1199A 50 35 100 50
VS-1N1200A 100 70 200 100
VS-1N1201A 150 105 300 150
VS-1N1202A 200 140 350 200
VS-1N1203A 300 210 450 300
VS-1N1204A 400 280 600 400
VS-1N1205A 500 350 700 500
VS-1N1206A 600 420 800 600
VS-1N3670A 700 490 900 700
VS-1N3671A 800 560 1000 800
VS-1N3672A 900 630 1100 900
VS-1N3673A 1000 700 1200 1000
VS-1N3624 1000 1200 1400 1000
VS-1N1...A, VS-1N36..A Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 2Document Number: 93493
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
JEDEC® registered values are in bold
(1) I2t for time tx = I2t x tx
(2) Maximum peak reverse current (IRM) under same conditions 2 x rated IR(AV)
Note
JEDEC registered values are in bold
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at case temperature IF(AV) 180° sinusoidal conduction 12 A
150 °C
Maximum peak one cycle non-repetitive
surge current IFSM
Half cycle 50 Hz sine wave
or 6 ms rectangular pulse Following any rated load
condition and with rated
VRRM applied
230
A
Half cycle 60 Hz sine wave
or 5 ms rectangular pulse 240
Half cycle 50 Hz sine wave
or 6 ms rectangular pulse Following any rated load
condition and with VRRM
applied following surge = 0 V
275
Half cycle 60 Hz sine wave
or 5 ms rectangular pulse 285
Maximum I2t for fusing
I2t
t = 10 ms With rated VRRM applied
following surge,
initial TJ = 200 °C
260
A2s
t = 8.3 ms 240
Maximum I2t for individual
device fusing
t = 10 ms With VRRM = 0 V following
surge, initial TJ = 200 °C
370
t = 8.3 ms 340
Maximum I2t for individual
device fusing I2t (1) t = 0.1 ms to 10 ms, VRRM = 0 V following surge 3715 A2s
Maximum forward voltage drop VFM IF(AV) = 12 A (38 A peak), TC = 25 °C 1.35 V
Maximum average
reverse current
VRRM = 50 V
IR(AV) (2) Maximum rated IF(AV) and TC
3.0
mA
VRRM = 100 V 2.5
VRRM = 150 V 2.25
VRRM = 200 V 2.0
VRRM = 300 V 1.75
VRRM = 400 V 1.5
VRRM = 500 V 1.25
VRRM = 600 V 1.0
VRRM = 700 V 0.9
VRRM = 800 V 0.8
VRRM = 900 V 0.7
VRRM = 1000 V 0.6
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating case and
storage temperature range TC, TStg -65 to 200 °C
Maximum internal thermal
resistance, junction to case RthJC DC operation 2.0
°C/W
Thermal resistance,
case to sink RthCS Mounting surface, smooth, flat and greased 0.5
Mounting torque
minimum Torque applied to nut; non-lubricated threads 1.36 (12)
N · m
(lbf · in)
maximum 1.69 (15)
minimum Torque applied to nut; lubricated threads 1.07 (9.45)
maximum 1.30 (11.55)
minimum Torque applied to device case; lubricated threads 1.17 (10.35)
maximum 1.43 (12.65)
Approximate weight 7.0 g
0.25 oz.
Case style JEDEC®DO-4 (DO-203AA)
VS-1N1...A, VS-1N36..A Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 3Document Number: 93493
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Average Forward Current vs.
Maximum Allowable Case Temperature
Fig. 2 - Maximum Low Level Forward Power Loss vs.
Average Forward Current
Fig. 3 - Maximum High Level Forward Power Loss vs.
Average Forward Current
Fig. 4 - Maximum Forward Voltage vs. Forward Current
Fig. 5 - Maximum Transient Thermal Impedance,
Junction to Case vs. Pulse Duration
Fig. 6 - Maximum Non-Repetitive 50 Hz Surge Current vs.
Number of Current Pulses
Maximum Allowable Case Temperature (°C)
Average
Forward Current Over Full Cycle (A)
+180 °C Wave
+180 °C Wave
+60 °C &
Wave
+120 °C &
Wave
DC
Conduction Period
0
0
2468 1210 14 1816 20
200
220
180
160
140
120
100
Average Forward Power Loss
Over Full Cycle (W)
Average
Forward Current Over Full Cycle (A)
TJ = 200°C
Conduction Period
0
0
24 6810
12
14
10
8
6
4
2
+180 °C Wave
+180 °C Wave
+120 °C & Wave
+60 °C & Wave
DC
Average Forward Power Loss
Over Full Cycle (W)
Average
Forward Current Over Full Cycle (A)
102
10
1.0
1.0 10
2
5
25 102
25 103
25
2
5
103
104
102
2
5
2
5
+180 °C Wave
+180 °C Wave
+120 °C & Wave
+120 °C & Wave
T
J
= 200°C
Conduction Period
DC
IF - Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
102
103
10
1.0
2
5
2
5
2
5
25 °C
TJ = 200 °C
t
-
Square Wave Pulse Duration (s)
Z
thJC
-
Transient Thermal Impedance (°C/W)
1.0
10
10-1
10-2
2
5
25 25 25 25 25
2
5
2
5
1 1010-1
10-2
10-3
10-4
Steady State Value = 2.0 °C/W
Peak Half Sine Wave Forward Current (A)
Number Of Equal Amplitude
Half Cycle Current Pulses (N)
2 4 6 8 10 20 40 6011
100
200
300
0
At Any Rated Load Condition And With
Rated VRRM Applied Following Surge
60 Hz
50 Hz
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95311
Document Number: 95311 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 30-Jun-08 1
DO-203AA (DO-4)
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
3.30 (0.13)
4.00 (0.16)
5.50 (0.22) MIN.
10.20 (0.40)
MAX.
11.50 (0.45)
10.70 (0.42)
10/32" UNF-2A
For metric devices: M5 x 0.8
0.8 ± 0.1
(0.03 ± 0.004)
R 0.40
R (0.02)
Ø 6.8 (0.27)
Ø 1.80 ± 0.20
(Ø 0.07 ± 0.01)
3.50 (0.14)
20.30 (0.80) MAX.
11 (0.43)
2
+ 0.3
0
(0.08 )
+ 0.01
0
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED