INCH-POUND MS27508H 24 November 2008 SUPERSEDING MS27508G 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES II Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle. AMSC N/A FSC 5935 MS27508H Shell size R BSC S max 8 .297 .828 .547 10 .3595 .954 .672 .406 1.047 .844 .453 1.141 .4845 1.234 1.094 18 .531 1.328 1.219 20 .578 1.453 1.344 .625 1.578 1.469 .6875 1.703 12 F max L max .146 14 .250 16 22 24 .168 FIGURE 1. Receptacle - Continued. 2 T +.010 -.005 .120 .147 AB max .969 1.594 MS27508H Inches mm Inches mm Inches mm Inches mm .005 .13 .203 5.16 .672 17.07 1.344 34.14 .007 .18 .223 5.66 .6875 17.45 1.391 35.33 .008 .20 .250 6.35 .828 21.03 1.453 36.91 .010 .25 .297 7.54 .844 21.44 1.469 37.31 .011 .28 .322 8.18 .954 24.23 1.516 38.51 .012 .30 .3595 9.13 .969 24.61 1.578 40.08 .036 .91 .406 10.31 1.047 26.59 1.594 40.49 .058 1.47 .447 11.35 1.078 27.38 1.641 41.68 .06 1.5 .453 11.51 1.094 27.79 1.703 43.26 .120 3.05 .4845 12.31 1.141 28.98 1.766 44.86 .139 3.53 .531 13.49 1.219 30.96 1.891 48.03 .146 3.71 .547 13.89 1.234 31.34 2.016 51.21 .147 3.73 .578 14.68 1.266 32.16 2.204 55.98 .168 4.27 .625 15.88 1.328 33.73 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. For main key and key positions, see MIL-DTL-38999. 4. The gauge feature for GG shall be .010 inch (0.25 mm) smaller than the MMC size at basic location. 5. Dimensioning and tolerances are in accordance with ASME-Y14.5M. 6. Maximum panel thickness including mounting hardware. FIGURE 1. Receptacle - Continued. 3 MS27508H REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MS27473, MS27480, MS27484 and MS27500. Procurement specification: MIL-DTL-38999. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27508 E 24 F 61 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions no letter is required for normal. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MS27473 MS27480 MS27484 MS27500 MIL-STD-1560 ASME-Y14.5M 4 MS27508H CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2008-050) Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil. 5