INCH-POUND
MS27508H
24 November 2008
SUPERSEDING
MS27508G
12 July 2002
DETAIL SPECIFICATION SHEET
CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL,
BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES II
Reactivated after 24 May 2004 and may be used
for new and existin
g
desi
g
ns and ac
q
uisitions.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-DTL-38999.
FIGURE 1. Receptacle.
AMSC N/A FSC 5935
MS27508H
Shell
size F
max L
max R
BSC S
max T
+.010
-.005
AB
max
8 .297 .828 .547
10 .3595 .954 .672
12 .406 1.047 .844
14 .453 1.141 .969
16 .4845 1.234 1.094
18
.146
.531 1.328 1.219
20 .578 1.453 1.344
22 .625 1.578
.120
1.469
24
.168
.250
.6875 1.703 .147 1.594
FIGURE 1. Receptacle – Continued.
2
MS27508H
Inches mm Inches mm Inches mm Inches mm
.005 .13 .203 5.16 .672 17.07 1.344 34.14
.007 .18 .223 5.66 .6875 17.45 1.391 35.33
.008 .20 .250 6.35 .828 21.03 1.453 36.91
.010 .25 .297 7.54 .844 21.44 1.469 37.31
.011 .28 .322 8.18 .954 24.23 1.516 38.51
.012 .30 .3595 9.13 .969 24.61 1.578 40.08
.036 .91 .406 10.31 1.047 26.59 1.594 40.49
.058 1.47 .447 11.35 1.078 27.38 1.641 41.68
.06 1.5 .453 11.51 1.094 27.79 1.703 43.26
.120 3.05 .4845 12.31 1.141 28.98 1.766 44.86
.139 3.53 .531 13.49 1.219 30.96 1.891 48.03
.146 3.71 .547 13.89 1.234 31.34 2.016 51.21
.147 3.73 .578 14.68 1.266 32.16 2.204 55.98
.168 4.27 .625 15.88 1.328 33.73
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. For main key and key positions, see MIL-DTL-38999.
4. The gauge feature for GG shall be .010 inch (0.25 mm) smaller than the MMC size at basic
location.
5. Dimensioning and tolerances are in accordance with ASME-Y14.5M.
6. Maximum panel thickness including mounting hardware.
FIGURE 1. Receptacle – Continued.
3
MS27508H
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Interface dimensions shall conform to MIL-DTL-38999.
Mating connectors: MS27473, MS27480, MS27484 and MS27500.
Procurement specification: MIL-DTL-38999.
Insert arrangements: See MIL-STD-1560.
Part or Identifying Number (PIN) example:
MS27508 E 24 F 61 P A
MS number
Class
Shell size
Finish
Insert arrangement
Contact style
Polarizing positions
no letter is required for normal.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-38999, this document references the following:
MS27473
MS27480
MS27484
MS27500
MIL-STD-1560
ASME-Y14.5M
4
MS27508H
CONCLUDING MATERIAL
Custodians: Preparing activity:
Army – CR DLA – CC
Navy – AS
Air Force – 85 (Project 5935-2008-050)
DLA – CC
Review activities:
Army – AR, MI
Navy – EC, MC, OS
Air Force – 19, 99
DLA – IS
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at http://assist.daps.dla.mil.
5