UL C-UL RF PhotoMOS (AQY221 2V) pending Ultra minimum package size, SSOP (1 Form A) 4-pin type. Lower output capacitance (C type) and on resistance (R type). (C R10) pending RF PhotoMOS (AQY2212V) FEATURES 4.45 .175 1.80 .071 2.65 .104 mm inch 1 4 2 3 1. Reduced package size Lower surface has been reduced 60% and mounting space 40% compared to conventional 4-pin SOP type. 2. Two types are available: A type with greatly reduced ON resistance, and a type with even lower output capacitance between terminals. AQY221R2V (R Type) AQY221N2V (C Type) 12.5pF 1.0pF 0.75 9.5 Output capacitance (C) ON resistance (R) 3. Mounting space has been reduced and output signals have been improved by using new flat lead terminals. Conventional SOP type 4. High speed switching (Part No.: AQY221N2V) Turn on time: 0.02ms Turn off time: 0.02ms TYPICAL APPLICATIONS Measuring and testing equipment 1. Test equipment IC tester, Liquid crystal driver tester, semiconductor performance tester 2. Board tester Bare board tester, In-circuit tester, function tester 3. Medical equipment Ultrasonic wave diagnostic machine 4. Multi-point recorder Strainmeter, thermo couple SSOP Flat lead TYPES Type AC/DC Low on resistance (R Type) type Low capacitance (C Type) Output rating* Load voltage Load current 40 V 250 mA 40 V 120 mA Part No. (Tape and reel packing style) Picked from the 1/4-pin side Picked from the 2/3-pin side AQY221R2VY AQY221R2VW AQY221N2VY AQY221N2VW Packing quantity Tape and reel: 3,500 pcs. * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. (2) For space reasons, the initial letters of the product number "AQY", the package type indicator "Y" and "W" are omitted from the seal. (Ex. the label for product number AQY221N2V is 221N2) RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current Input Output Symbol IF LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current (peak AC) Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature Operating limits Storage VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY221R2V AQY221N2V 50mA 5V 1A 75mW 40V 0.25A 0.75A Remarks f=100 Hz, Duty factor=0.1% 0.12A 0.3A 250mW 300mW 1,500V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Peak AC, DC 100 ms (1 shot), VL= DC Non-condensing at low temperatures RF PhotoMOS (AQY2212V) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current LED turn off current Input LED dropout voltage On resistance Output Typical Maximum Typical Output capacitance Maximum Off state leakage current Typical Maximum Switching speed Transfer characteristics Ron Cout ILeak Toff Typical Maximum Condition*2 C type (IL = 80 mA) R type (IL = 250 mA) 0.1 mA 0.2 mA 0.8 mA 0.9 mA 1.35 V (1.14 V at IF = 5 mA) 1.5 V VF Typical Turn off time*1 Maximum AQY221N2V 1.0 mA 3.0 mA IFoff Ton Initial I/O isolation Minimum resistance Notes: IFon Typical Turn on time*1 Maximum I/O capacitance AQY221R2V 0.9 mA 0.75 9.5 1.25 12.5 12.5 pF 1.0 pF C type (IL = 80 mA) R type (IL = 250 mA) C type (IF = 50 mA) R type (IF = 50 mA) C type (IF = 5 mA, IL = 80 mA Within 1 s on time) R type (IF = 5 mA, IL = 250 mA Within 1 s on time) IF = 0 mA VB = 0 V f = 1 MHz 18 pF 1.5 pF 0.02 nA 0.01 nA C type (IF = 0 mA, VL = Max.) R type (IF = 0 mA, VL = Max.) 0.02 ms C type (IF = 5 mA, VL = 10 V RL = 125) R type (IF = 5 mA, VL = 10 V RL = 40) C type (IF = 5 mA, VL = 10 V RL = 125) R type (IF = 5 mA, VL = 10 V RL = 40) 10 nA 0.10 ms 0.5ms 0.08 ms 0.02 ms 0.2 ms 0.8 pF Ciso C type (f = 1 MHz, VB = 0 V) R type (f = 1 MHz, VB = 0 V) 1.5 pF 1,000M Riso 500V DC 2. Variation possible through combinations of output capacitance and ON resistance. *1 Turn on/Turn off time Input 90% 10% Output Ton Toff *2 Low on resistance (R type) Low capacitance (C type) REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. Load current vs. Load voltage characteristics Ambient temperature: 25C 77F Allowable ambient temperature: -40C to +85C -40F to +185F 3. On resistance vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: Max. (DC); Load current: 250mA (DC) R type, 80mA (DC) C type 280 400 25 AQY221R2V AQY221R2V 200 120 100 AQY221N2V On resistance, Load current, mA Load current, mA 240 300 200 160 AQY221N2V 120 -20 0 20 AQY221N2V 15 10 80 5 40 0 -10 20 40 60 8085 100 Ambient temperature, C 0 AQY221R2V 0 10 20 30 40 50 0 -40 Load voltage, V All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. -20 0 20 40 60 8085 Ambient temperature, C RF PhotoMOS (AQY2212V) 5. Turn off time vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type 0.25 0.25 0.2 AQY221R2V 0.15 Turn off time, ms 0.3 5 0.2 0.15 0.1 0.1 AQY221N2V 0.05 -40 -20 0 20 40 0 3 2 AQY221N2V AQY221R2V AQY221N2V -40 -20 0 20 40 0 80 85 60 -40 -20 Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type 0 8. LED dropout voltage vs. ambient temperature characteristics 2 AQY221N2V 1 300 -40 -20 0 20 40 60 1.4 1.3 1.2 30mA 20mA 10mA 1.0 8085 Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F -40 -20 0 20 40 60 Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type; Ambient temperature: 25C 77F Turn on time, s 10-6 10-9 -300 12. Turn off time vs. LED forward current characteristics Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type; Ambient temperature: 25C 77F 0.5 0.5 0.4 0.4 AQY221R2V 0.3 AQY221N2V 0.2 0.3 0.2 AQY221R2V AQY221R2V AQY221N2V 20 30 40 Load voltage, V 0.5 1.0 1.5 2.0 2.5 3.0 Voltage, V -100 -200 8085 100 11. Turn on time vs. LED forward current characteristics 10-3 10 AQY221N2V 100 Ambient temperature, C 10. Off state leakage current vs. load voltage characteristics 0 AQY221R2V 5mA Ambient temperature, C 10-12 8085 200 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 50mA 1.1 AQY221R2V 0 Current, mA LED dropout voltage, V 3 60 Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F 1.5 4 40 9. Current vs. voltage characteristics of output at MOS portion LED current: 5 to 50 mA 5 20 Ambient temperature, C Ambient temperature, C 7. LED turn off current vs. ambient temperature characteristics LED turn off current, mA 4 1 0.05 80 85 60 AQY221R2V Ambient temperature, C Off state leakage current, A Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type Turn off time, s Turn on time, ms 0.3 0 6. LED operate current vs. ambient temperature characteristics LED operate current, mA 4. Turn on time vs. ambient temperature characteristics 0.1 0.1 0 0 AQY221N2V 50 0 10 20 30 40 50 LED forward current, mA 60 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 0 10 20 30 40 50 LED forward current, mA 60 RF PhotoMOS (AQY2212V) 13. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25C 77F 14. Isolation vs. frequency characteristics (50 impedance) Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F 2 100 25 20 15 60 AQY221N2V 40 10 10 20 30 40 50 Applied voltage, V Measured portion: between terminals 3 and 4 Continuous load current: 250mA (DC) Ambient temperature: 25C 77F 0.6 0.7 0.8 AQY221N2V AQY221R2V 0 4 10 10 5 10 6 10 7 10 Frequency, Hz 16-(1). On resistance distribution (R type) 0.5 1 AQY221R2V AQY221N2V 0 1.5 0.5 20 AQY221R2V 5 Insertion loss, dB 80 Isolation, dB Output capacitance, pF 30 0 15. Insertion loss vs. frequency characteristics (50 impedance) 0.9 1 16-(2). On resistance distribution (C type) Measured portion: between terminals 3 and 4 Continuous load current: 80mA (DC) Ambient temperature: 25C 77F 8 0 10 4 105 10 6 Frequency, Hz 17-(1). Turn on time distribution (R type) Load voltage: 10V (DC) Continuous load current: 250mA (DC) Ambient temperature: 25C 77F 10 7