F-209-1 TW-08-09-G-T-250-100 TW-16-06-L-D-500-100 TW-20-03-G-Q-400-085 TM Through T/H Hole 2mm BOARD STACKER SPECIFICATIONS For complete specifications see www.samtec.com?TW Specify stacker height in (0,13mm) .005" increments Mates with: CLT, SQT, SQW, ESQT, TLE, SMM, MMS, TCSD Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50" (1,27m) Ni Current Rating: 3A @ 80C ambient Operating Temp Range: -55C to +105C with Tin; -55C to +125C with Gold RoHS Compliant: Yes TW SERIES ALSO AVAILABLE Choice of one through six rows Processing: Max Processing Temp: 230C for 60 seconds, or 260C for 20 seconds 3x Lead-Free Solderable: Yes (2,00mm) .0787 pitch Paste In Hole (PIH) processing. Contact Samtec ASP Group. NO. PINS PER ROW TW Note: Other Gold plating options available. Contact Samtec. 02 thru 50 Note: This Series is non-standard, non-returnable. Also Available LEAD STYLE PLATING OPTION Specify LEAD STYLE from chart below. -L = 10" (0,25m) Gold contact area, Matte Tin on tail = 20" (0,51m) Gold contact area Gold flash on tail See 2SN Series. Surface Mount See previous page. 300 = Matte Tin (2,00) .0787 TYP No. of rows x (2,00) .0787 Low Profile See TMM Series. Right Angle Shrouded Double Row See ZLTMM Series. -S -"XXX" = Single Row -D -T = Triple Row -Q = Four Row -5 = Five Row 01 -S, -D*, -Q See TMM Series. -T 04 STACKER HEIGHT = Double Row -G 2mm Shunt ROW OPTION -T, -5, -6 295 -6 = Six Row (0,51) .020 SQ POST STACKER (1,27) HEIGHT See OAL .050 MIN Chart TAIL (2,00) .0787 (0,00) .000 MIN -S, -D*, -Q -T, -5, -6 WWW.SAMTEC.COM = Stacker Height In inches (0,13mm) .005" increments TAIL SPEC -"XXX" = Tail Length In inches (0,13mm) .005" increments Example: -150 Example: -250 = (3,81mm) = (6,35mm) .150" .250" LEAD STYLE -01 -02 -03 -04 -05 -06 -07 * -08 -09 -10 -11 * -12 OAL (8,20) .323 (9,60) .377 (13,60) .535 -"XXX" = Polarized Position (Specify position to be removed) (14,10) .555 (15,10) .594 (17,10) .673 (19,10) .751 (21,10) .830 (11,60) .456 (15,60) .614 (10,08) .397 (28,19) 1.110 * Style -08 & -12 = S & D only ROW OPTION STACKER HEIGHT -S, -D*, & -Q -T, -5, -6 (3,05) .120 MIN (4,06) .160 MIN * -D with stacker height greater than (4,06mm) .160" will not have standoffs.