To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7
December 2014
4N38M, H11D1M, H11D3M, MOC8204M
6-Pin DIP High Voltage Phototransistor Optocouplers
Features
■
High Voltage:
– MOC8204M, BV
CEO
= 400 V
– H11D1M, BV
CEO
= 300 V
– H11D3M, BV
CEO
= 200 V
■
Safety and Regulatory Approvals:
– UL1577, 4,170 VAC
RMS
for 1 Minute
■
DIN-EN/IEC60747-5-5, 850 V Peak Working
Insulation Voltage
Applications
■
Power Supply Regulators
■
Digital Logic Inputs
■
Microprocessor Inputs
■
Appliance Sensor Systems
■
Industrial Controls
Description
The 4N38M, H11D1M, H11D3M, and MOC8204M are
phototransistor-type optically coupled optoisolators. A
gallium arsenide infrared emitting diode is coupled with a
high voltage NPN silicon phototransistor. The device is
supplied in a standard plastic six-pin dual-in-line
package.
Schematic Package Outlines
EMITTER
COLLECTOR
1
2
3
ANODE
CATHODE
4
5
6BASE
N/C
Figure 2. Package Outlines
Figure 1. Schematic
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7 2
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
Safety and Insulation Ratings
As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Note:
1. Safety limit values – maximum values allowed in the event of a failure.
Parameter Characteristics
Installation Classifications per DIN VDE
0110/1.89 Table 1, For Rated Mains Voltage
< 150 V
RMS
I–IV
< 300 V
RMS
I–IV
Climatic Classification 55/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
Comparative Tracking Index 175
Symbol Parameter Value Unit
V
PR
Input-to-Output Test Voltage, Method A, V
IORM
x 1.6 = V
PR
,
Type and Sample Test with t
m
= 10 s, Partial Discharge < 5 pC 1360 V
peak
Input-to-Output Test Voltage, Method B, V
IORM
x 1.875 = V
PR
,
100% Production Test with t
m
= 1 s, Partial Discharge < 5 pC 1594 V
peak
V
IORM
Maximum Working Insulation Voltage 850 V
peak
V
IOTM
Highest Allowable Over-Voltage 6000 V
peak
External Creepage
≥
7mm
External Clearance
≥
7mm
External Clearance (for Option TV, 0.4" Lead Spacing)
≥
10 mm
DTI Distance Through Insulation (Insulation Thickness)
≥
0.5 mm
T
S
Case Temperature
(1)
175 °C
I
S,INPUT
Input Current
(1)
350 mA
P
S,OUTPUT
Output Power
(1)
800 mW
R
IO
Insulation Resistance at T
S
, V
IO
= 500 V
(1)
> 10
9
Ω
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7 3
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Note:
2. Parameters meet or exceed JEDEC registered data (for 4N38M only).
Symbol Parameter Device Value Unit
TOTAL DEVICE
T
STG
Storage Temperature All -40 to +125 °C
T
OPR
Operating Temperature All -40 to +100 °C
T
J
Junction Temperature All -40 to +125 ºC
T
SOL
Lead Solder Temperature All 260 for 10 seconds °C
P
D
Total Device Power Dissipation @ T
A
= 25°C All 420 mW
Derate Above 25°C 3.5 mW/°C
EMITTER
I
F
Forward DC Current
(2)
All 80 mA
V
R
Reverse Input Voltage
(2)
All 6.0 V
I
F
(pk) Forward Current – Peak (1 µs pulse, 300pps)
(2)
All 3.0 A
P
D
LED Power Dissipation @ T
A
= 25°C
(2)
All 120 mW
Derate Above 25°C 1.41 mW/°C
DETECTOR
P
D
Power Dissipation @ T
A
= 25°C All 300 mW
Derate linearly above 25°C 4.0 mW/°C
V
CEO
Collector to Emitter Voltage
(2)
MOC8204M 400 V
H11D1M 300 V
H11D3M 200 V
4N38M 80 V
V
CBO
Collector Base Voltage
(2)
MOC8204M 400 V
H11D1M 300 V
H11D3M 200 V
4N38M 80 V
V
ECO
Emitter to Collector Voltage
(2)
H11D1M,
H11D3M,
MOC8204M
7V
I
C
Collector Current (Continuous) All 100 mA
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7 4
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
Electrical Characteristics
T
A
= 25°C unless otherwise specified.
Individual Component Characteristics
Note:
3. Parameters meet or exceed JEDEC registered data (for 4N38M only).
Symbol Characteristic Test Conditions Device Min. Typ. Max. Unit
EMITTER
V
F
Forward Voltage
(3)
I
F
= 10 mA All 1.15 1.50 V
Δ
V
F
Δ
T
A
Forward Voltage
Temperature Coefficient All -1.8 mV/°C
BV
R
Reverse Breakdown Voltage I
R
= 10 µA All 6 25 V
C
J
Junction Capacitance V
F
= 0 V, f = 1 MHz All 50 pF
V
F
= 1 V, f = 1 MHz 65 pF
I
R
Reverse Leakage Current
(3)
V
R
= 6 V All 0.05 10 µA
DETECTOR
BV
CEO
Breakdown Voltage
Collector-to-Emitter
(3)
R
BE
= 1 M
Ω
,
I
C
= 1.0 mA, I
F
= 0
MOC8204M 400 V
H11D1M 300 V
H11D3M 200 V
No RBE, I
C
= 1.0 mA 4N38M 80 V
BV
CBO
Collector to Base
(3)
I
C
= 100 µA, I
F
= 0
MOC8204M 400 V
H11D1M 300 V
H11D3M 200 V
4N38M 80 V
BV
EBO
Emitter to Base I
E
= 100 µA, I
F
= 0 4N38M 7 V
BV
ECO
Emitter to Collector I
E
= 100 µA, I
F
= 0 All 7 10 V
I
CEO
Leakage Current
Collector to Emitter
(3)
(R
BE
= 1 M
Ω
)
V
CE
= 300 V, I
F
= 0,
T
A
= 25°C MOC8204M
100 nA
V
CE
= 300 V, I
F
= 0,
T
A
= 100°C 250 µA
V
CE
= 200V, I
F
= 0,
T
A
= 25°C H11D1M
100 nA
VCE = 200 V, IF = 0,
TA = 100°C 250 µA
VCE = 100 V, IF = 0,
TA = 25°C H11D3M
100 nA
VCE = 100 V, IF = 0,
TA = 100°C 250 µA
No RBE, VCE = 60 V,
IF = 0, TA = 25°C 4N38M 50 nA
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7 5
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
Electrical Characteristics (Continued)
TA = 25°C unless otherwise specified.
Transfer Characteristics
Note:
4. Parameters meet or exceed JEDEC registered data (for 4N38M only).
Isolation Characteristics
Symbol Characteristics Test Conditions Device Min. Typ. Max. Unit
EMITTER
CTR Current Transfer Ratio,
Collector-to-Emitter
IF = 10 mA, VCE = 10 V,
RBE = 1 MΩ
H11D1M, H11D3M,
MOC8204M 2 (20) mA (%)
IF = 10 mA, VCE = 10 V 4N38M 2 (20) mA (%)
VCE(SAT) Saturation Voltage(4)
IF = 10 mA, IC = 0.5 mA,
RBE = 1 MΩ
H11D1M, H11D3M,
MOC8204M 0.1 0.4 V
IF = 20 mA, IC = 4 mA 4N38M 1.0 V
SWITCHING TIMES
tON
Non-Saturated
Turn-on Time VCE = 10 V, IC = 2 mA,
RL = 100 Ω
All 5 µs
tOFF Turn-off Time All 5 µs
Symbol Characteristic Test Conditions Min. Typ. Max. Unit
VISO Input-Output Isolation Voltage t = 1 Minute 4170 VACRMS
CISO Isolation Capacitance VI-O = 0 V, f = 1 MHz 0.2 pF
RISO Isolation Resistance VI-O = ±500 VDC, TA = 25°C 1011 Ω
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7 6
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
Typical Performance Curves
TA – AMBIENT TEMPERATURE (˚C)
NORMALIZED I
CEO
– DARK CURRENT
Figure 5. Normalized Output Current
vs. LED Input Current
IF – LED INPUT CURRENT (mA)
110
NORMALIZED I
C
– OUTPUT CURRENT
0.01
0.1
1
10
Normalized to:
VCE = 10 V
IF = 10 mA
RBE = 106 Ω
TA = 25˚C
TA – AMBIENT TEMPERATURE (˚C)
NORMALIZED I
C
– OUTPUT CURRENT
Figure 6. Normalized Output Current
vs. Temperature
-60 -40 -20 0 20 40 60 80 100
0.1
1
Normalized to:
VCE = 10 V
IF = 10 mA
RBE = 106 Ω
TA = 25˚C
IF = 10 mA
IF = 5 mA
IF = 20 mA
TA – AMBIENT TEMPERATURE (˚C)
NORMALIZED I
CBO
– COLLECTOR-BASE CURRENT
Figure 8. Normalized Collector-Base Current
vs. Temperature
-60 -40 -20 0 20 40 60 80 100
0
1
2
3
4
5
6
7
8
9
10
Normalized to:
VCE = 10 V
IF = 10 mA
RBE = 106 Ω
TA = 25˚C
IF = 50 mA
IF = 10 mA
IF = 5 mA
Figure 7. Normalized Dark Current
vs. Ambient Temperature
10 20 30 40 50 60 70 80 90 100 110
0.1
1
10
100
1000
10000
VCE = 300 V
VCE = 100 V
VCE = 50 V
Normalized to:
VCE = 100 V
RBE = 106 Ω
TA = 25˚C
VCE – COLLECTOR VOLTAGE (V)
NORMALIZED I
C
– OUTPUT CURRENT
Figure 4. Normalized Output Characteristics
0.1 1 10 100
0.01
0.1
1
10
Normalized to:
VCE = 10 V
IF = 10 mA
RBE = 106 Ω
TA = 25˚C
IF – LED FORWARDCURRENT (mA)
V
F
– FORWARD VOLTAGE (V)
Figure 3. LED Forward Voltage
vs. Forward Current
1 10 100
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
TA = -55˚C
TA = 25˚C
TA = 100˚C
IF = 50 mA
IF = 5 mA
IF = 10 mA
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7 7
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
Reflow Profile
Figure 9. Reflow Profile
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
°C
Time (s)
0 60 180120 270
260°C
> 245°C = 42 s
Time above
183°C = 90 s
360
1.822°C/s Ramp-up rate
33 s
©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
4N38M, H11D1M, H11D3M, MOC8204M Rev. 1.0.7 8
4N38M, H11D1M, H11D3M, MOC8204M — 6-Pin DIP High Voltage Phototransistor Optocouplers
Ordering Information
Note:
2. The product orderable part number system listed in this table also applies to the 4N38M, H11D3M, and MOC8204M
devices.
Marking Information
Figure 10. 12. Top Mark
Table 1. Top Mark Definitions
Part Number Package Packing Method
H11D1M DIP 6-Pin Tube (50 Units)
H11D1SM SMT 6-Pin (Lead Bend) Tube (50 Units)
H11D1SR2M SMT 6-Pin (Lead Bend) Tape and Reel (1000 Units)
H11D1VM DIP 6-Pin, DIN EN/IEC60747-5-5 Option Tube (50 Units)
H11D1SVM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tube (50 Units)
H11D1SR2VM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tape and Reel (1000 Units)
H11D1TVM DIP 6-Pin, 0.4” Lead Spacing, DIN EN/IEC60747-5-5 Option Tube (50 Units)
1 Fairchild Logo
2 Device Number
3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option)
4 One-Digit Year Code, e.g., “4”
5 Digit Work Week, Ranging from “01” to “53”
6 Assembly Package Code
H11D1
V X YY Q
1
2
6
43 5
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
