Ultralow Distortion, High Speed Amplifiers AD8007/AD8008 CONNECTION DIAGRAMS Extremely low distortion Second harmonic -88 dBc @ 5 MHz -83 dBc @ 20 MHz (AD8007) -77 dBc @ 20 MHz (AD8008) Third harmonic -101 dBc @ 5 MHz -92 dBc @ 20 MHz (AD8007) -98 dBc @ 20 MHz (AD8008) High speed 650 MHz, -3 dB bandwidth (G = +1) 1000 V/s slew rate Low noise 2.7 nV/Hz input voltage noise 22.5 pA/Hz input inverting current noise Low power: 9 mA/amplifier typical supply current Wide supply voltage range: 5 V to 12 V 0.5 mV typical input offset voltage Small packaging: 8-lead SOIC, 8-lead MSOP, and 5-lead SC70 NC 1 7 +VS 6 VOUT -VS 4 5 NC AD8007 (Top View) 5 +VS 4 -IN +IN 3 02866-002 -VS 2 Figure 2. 5-Lead SC70 (KS) (Top View) 8 +VS 7 VOUT2 +IN1 3 6 -IN2 -VS 4 5 +IN2 -IN1 2 02866-003 AD8008 VOUT1 1 Figure 3. 8-Lead SOIC (R) and 8-Lead MSOP (RM) The AD8007 is available in a tiny SC70 package as well as a standard 8-lead SOIC. The dual AD8008 is available in both an 8-lead SOIC and an 8-lead MSOP. These amplifiers are rated to work over the industrial temperature range of -40C to +85C. -30 G = +2 RL = 150 VS = 5V VOUT = 2V p-p -40 -50 -60 -70 SECOND -80 -90 THIRD -100 -110 1 10 FREQUENCY (MHz) 100 02866-004 With the wide supply voltage range (5 V to 12 V) and wide bandwidth, the AD8007/AD8008 are designed to work in a variety of applications. The AD8007/AD8008 amplifiers have a low power supply current of 9 mA/amplifier. -IN 2 +IN 3 VOUT 1 DISTORTION (dBc) The AD8007/AD8008 have 650 MHz bandwidth, 2.7 nV/Hz voltage noise, -83 dB SFDR at 20 MHz (AD8007), and -77 dBc SFDR at 20 MHz (AD8008). NC NC = NO CONNECT Instrumentation IF and baseband amplifiers Filters A/D drivers DAC buffers The AD8007 (single) and AD8008 (dual) are high performance current feedback amplifiers with ultralow distortion and noise. Unlike other high performance amplifiers, the low price and low quiescent current allow these amplifiers to be used in a wide range of applications. Analog Devices, Inc., proprietary second-generation eXtra-Fast Complementary Bipolar (XFCB) process enables such high performance amplifiers with low power consumption. 8 Figure 1. 8-Lead SOIC (R) APPLICATIONS GENERAL DESCRIPTION AD8007 (Top View) 02866-001 FEATURES Figure 4. AD8007 Second and Third Harmonic Distortion vs. Frequency Rev. E Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2002-2009 Analog Devices, Inc. All rights reserved. AD8007/AD8008 TABLE OF CONTENTS Features .............................................................................................. 1 Typical Performance Characteristics ..............................................7 Applications ....................................................................................... 1 Theory of Operation ...................................................................... 15 Connection Diagrams ...................................................................... 1 Using the AD8007/AD8008 ...................................................... 15 General Description ......................................................................... 1 Layout Considerations ............................................................... 16 Revision History ............................................................................... 2 Layout And Grounding Considerations ...................................... 17 Specifications..................................................................................... 3 Grounding ................................................................................... 17 VS = 5 V ....................................................................................... 3 Input Capacitance ...................................................................... 17 VS = 5 V.......................................................................................... 4 Output Capacitance ................................................................... 17 Absolute Maximum Ratings............................................................ 6 Input-to-Output Coupling ........................................................ 17 Maximum Power Dissipation ......................................................... 6 External Components and Stability ......................................... 17 Output Short Circuit ........................................................................ 6 Outline Dimensions ....................................................................... 18 ESD Caution .................................................................................. 6 Ordering Guide .......................................................................... 19 REVISION HISTORY 11/09--Rev. D to Rev. E Change to Output Capacitance Section....................................... 17 Updated Outline Dimensions ....................................................... 18 Changes to Ordering Guide .......................................................... 19 6/03--Rev. C to Rev. D Change to Layout Considerations Section .................................. 15 Deleted Figure 7 .............................................................................. 16 Deleted Evaluation Board Section ................................................ 16 Updated Outline Dimensions ....................................................... 16 10/02--Rev. B to Rev. C Connection Diagrams Captions Updated .................................... 1 Ordering Guide Updated ................................................................ 5 Figure 5 Edited ............................................................................... 14 Updated Outline Dimensions ....................................................... 19 9/02--Rev. A to Rev. B Updated Outline Dimensions ....................................................... 19 8/02--Rev. 0 to Rev. A Added AD8008 .................................................................. Universal Added SOIC-8 (RN) and MSOP-8 (RM) ......................................1 Changes to Features ..........................................................................1 Changes to General Description ....................................................1 Changes to Specifications ................................................................2 Edits to Maximum Power Dissipation Section .............................4 New Figure 2 .....................................................................................4 Changes to Ordering Guide ............................................................5 New TPCs 19 to 24 and TPCs 27, 29, 30, and 35 ..........................9 Changes to Evaluation Board Section ......................................... 16 MSOP-8 (RM) Added ................................................................... 19 Rev. E | Page 2 of 20 AD8007/AD8008 SPECIFICATIONS VS = 5 V TA = 25C, RS = 200 , RL = 150 , RF = 499 , Gain = +2, unless otherwise noted. Table 1. Parameter DYNAMIC PERFORMANCE -3 dB Bandwidth Bandwidth for 0.1 dB Flatness Overdrive Recovery Time Slew Rate Settling Time to 0.1% Settling Time to 0.01% NOISE/HARMONIC PERFORMANCE Second Harmonic Third Harmonic IMD Third-Order Intercept Crosstalk (AD8008) Input Voltage Noise Input Current Noise Differential Gain Error Differential Phase Error DC PERFORMANCE Input Offset Voltage Input Offset Voltage Drift Input Bias Current Input Bias Current Drift Transimpedance INPUT CHARACTERISTICS Input Resistance Input Capacitance Input Common-Mode Voltage Range Common-Mode Rejection Ratio OUTPUT CHARACTERISTICS Output Saturation Voltage Short-Circuit Current, Source Short-Circuit Current, Sink Capacitive Load Drive Conditions Min G = +1, VO = 0.2 V p-p, RL = 1 k G = +1, VO = 0.2 V p-p, RL = 150 G = +2, VO = 0.2 V p-p, RL = 150 G = +1, VO = 2 V p-p, RL = 1 k VO = 0.2 V p-p, G = +2, RL = 150 2.5 V input step, G = +2, RL = 1 k G = +1, VO = 2 V step G = +2, VO = 2 V step G = +2, VO = 2 V step 540 250 180 200 50 AD8007/AD8008 Typ Max Unit 650 500 230 235 90 30 1000 18 35 MHz MHz MHz MHz MHz ns V/s ns ns fC = 5 MHz, VO = 2 V p-p fC = 20 MHz, VO = 2 V p-p fC = 5 MHz, VO = 2 V p-p fC = 20 MHz, VO = 2 V p-p fC = 19.5 MHz to 20.5 MHz, RL = 1 k, VO = 2 V p-p fC = 5 MHz, RL = 1 k fC = 20 MHz, RL = 1 k f = 5 MHz, G = +2 f = 100 kHz -Input, f = 100 kHz +Input, f = 100 kHz NTSC, G = +2, RL = 150 NTSC, G = +2, RL = 150 -88 -83/-77 -101 -92/-98 -77 43.0/42.5 42.5 -68 2.7 22.5 2 0.015 0.010 dBc dBc dBc dBc dBc dBm dBm dB nV/Hz pA/Hz pA/Hz % Degree +Input -Input +Input -Input VO = 2.5 V, RL = 1 k RL = 150 1.0 0.4 0.5 3 4 0.4 16 9 1.5 0.8 56 4 1 -3.9 to +3.9 59 900 +Input +Input VCM = 2.5 V VCC - VOH, VOL - VEE, RL = 1 k 30% overshoot Rev. E | Page 3 of 20 1.1 130 90 8 4 8 6 mV V/C A A nA/C nA/C M M M pF V dB 1.2 V mA mA pF AD8007/AD8008 Parameter POWER SUPPLY Operating Range Quiescent Current per Amplifier Power Supply Rejection Ratio +PSRR -PSRR Conditions Min AD8007/AD8008 Typ Max 5 12 10.2 9 59 59 64 65 Unit V mA dB dB VS = 5 V TA = 25C, RS = 200 , RL = 150 , RF = 499 , Gain = +2, unless otherwise noted. Table 2. Parameter DYNAMIC PERFORMANCE -3 dB Bandwidth Bandwidth for 0.1 dB Flatness Overdrive Recovery Time Slew Rate Settling Time to 0.1% Settling Time to 0.01% NOISE/HARMONIC PERFORMANCE Second Harmonic Third Harmonic IMD Third-Order Intercept Crosstalk (AD8008) Input Voltage Noise Input Current Noise DC PERFORMANCE Input Offset Voltage Input Offset Voltage Drift Input Bias Current Input Bias Current Drift Transimpedance INPUT CHARACTERISTICS Input Resistance Input Capacitance Input Common-Mode Voltage Range Common-Mode Rejection Ratio Conditions G = +1, VO = 0.2 V p-p, RL = 1 k G = +1, VO = 0.2 V p-p, RL = 150 G = +2, VO = 0.2 V p-p, RL = 150 G = +1, VO = 1 V p-p, RL = 1 k VO = 0.2 V p-p, G = +2, RL = 150 2.5 V input step, G = +2, RL = 1 k G = +1, VO = 2 V step G = +2, VO = 2 V step G = +2, VO = 2 V step AD8007/AD8008 Min Typ Max Unit 520 350 190 270 72 580 490 260 320 120 30 740 18 35 MHz MHz MHz MHz MHz ns V/s ns ns 665 fC = 5 MHz, VO = 1 V p-p fC = 20 MHz, VO = 1 V p-p fC = 5 MHz, VO = 1 V p-p fC = 20 MHz, VO = 1 V p-p fC = 19.5 MHz to 20.5 MHz, RL = 1 k, VO = 1 V p-p fC = 5 MHz, RL = 1 k fC = 20 MHz, RL = 1 k Output-to-output, f = 5 MHz, G = +2 f = 100 kHz -Input, f = 100 kHz +Input, f = 100 kHz -96/-95 -83/-80 -100 -85/-88 -89/-87 dBc dBc dBc dBc dBc 43.0 42.5/41.5 -68 2.7 22.5 2 dBm dBm dB nV/Hz pA/Hz pA/Hz +Input -Input +Input -Input VO = 1.5 V to 3.5 V, RL = 1 k RL = 150 0.5 0.4 0.5 3 4 0.7 15 8 1.3 0.6 54 4 1 1.1 to 3.9 56 +Input +Input VCM = 1.75 V to 3.25 V Rev. E | Page 4 of 20 4 8 6 mV V/C A A nA/C nA/C M M M pF V dB AD8007/AD8008 Parameter OUTPUT CHARACTERISTICS Output Saturation Voltage Short-Circuit Current, Source Short-Circuit Current, Sink Capacitive Load Drive POWER SUPPLY Operating Range Quiescent Current per Amplifier Power Supply Rejection Ratio +PSRR -PSRR Conditions AD8007/AD8008 Min Typ Max VCC - VOH, VOL - VEE, RL = 1 k 1.05 70 50 8 30% overshoot 5 8.1 59 59 Rev. E | Page 5 of 20 62 63 Unit 1.15 V mA mA pF 12 9 V mA dB dB AD8007/AD8008 ABSOLUTE MAXIMUM RATINGS Rating 12.6 V See Figure 5 VS 1.0 V See Figure 5 -65C to +125C -40C to +85C 300C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. MAXIMUM POWER DISSIPATION The maximum safe power dissipation in the AD8007/AD8008 packages is limited by the associated rise in junction temperature (TJ) on the die. The plastic encapsulating the die locally reaches the junction temperature. At approximately 150C, which is the glass transition temperature, the plastic changes its properties. Even temporarily exceeding this temperature limit can change the stresses that the package exerts on the die, permanently shifting the parametric performance of the AD8007/AD8008. Exceeding a junction temperature of 175C for an extended time can result in changes in the silicon devices, potentially causing failure. The still-air thermal properties of the package and PCB (JA), ambient temperature (TA), and the total power dissipated in the package (PD) determine the junction temperature of the die. The junction temperature can be calculated as If the rms signal levels are indeterminate, then consider the worst case, when VOUT = VS/4 for RL to midsupply VS 4 PD = (VS x I S ) + RL In single-supply operation, with RL referenced to VS, worst case is VOUT = VS/2. Airflow increases heat dissipation, effectively reducing JA. In addition, more metal directly in contact with the package leads from metal traces, through-holes, ground, and power planes reduces the JA. Care must be taken to minimize parasitic capacitances at the input leads of high speed op amps, see the Layout Considerations section. Figure 5 shows the maximum safe power dissipation in the package vs. the ambient temperature for the SOIC-8 (125C/W), MSOP-8 (150C/W), and SC70-5 (210C/W) packages on a JEDEC standard 4-layer board. JA values are approximations. 2.0 1.5 MSOP-8 SOIC-8 1.0 SC70-5 0.5 0 -60 -40 TJ = TA + (PD x JA) The power dissipated in the package (PD) is the sum of the quiescent power dissipation and the power dissipated in the package due to the load drive for all outputs. The quiescent power is the voltage between the supply pins (VS) times the quiescent current (IS). Assuming the load (RL ) is referenced to midsupply, the total drive power is VS/2 x IOUT, some of which is dissipated in the package and some in the load (VOUT x IOUT). The difference between the total drive power and the load power is the drive power dissipated in the package. -20 0 20 40 60 AMBIENT TEMPERATURE (C) 80 100 Figure 5. Maximum Power Dissipation vs. Temperature for a 4-Layer Board OUTPUT SHORT CIRCUIT Shorting the output to ground or drawing excessive current for the AD8007/AD8008 will likely cause catastrophic failure. ESD CAUTION PD = Quiescent Power + (Total Drive Power - Load Power) V V PD = (VS x I S ) + S x OUT RL 2 2 02866-005 Parameter Supply Voltage Power Dissipation Common-Mode Input Voltage Differential Input Voltage Output Short-Circuit Duration Storage Temperature Range Operating Temperature Range Lead Temperature (Soldering, 10 sec) RMS output voltages should be considered. If RL is referenced to VS, as in single-supply operation, then the total drive power is VS x IOUT. MAXIMUM POWER DISSIPATION (W) Table 3. VOUT 2 - RL Rev. E | Page 6 of 20 AD8007/AD8008 TYPICAL PERFORMANCE CHARACTERISTICS VS = 5 V, RL = 150 , RS = 200 , RF = 499 , unless otherwise noted. 3 6.4 2 6.3 G = +1 6.2 0 6.1 G = +2 GAIN (dB) -1 -2 -3 -4 G = +10 VS = +5V 5.9 5.8 VS = 5V 5.6 G = -1 -6 1 5.5 1000 10 100 FREQUENCY (MHz) 5.4 10 Figure 6. Small Signal Frequency Response for Various Gains 3 Figure 9. 0.1 dB Gain Flatness; VS = +5, VS = 5 V 9 G = +1 2 8 1 -1 RL = 150k, VS = 5V -3 -4 5 RL = 150k, VS = +5V 4 3 RL = 150k, VS = 5V 2 RL = 150k, VS = 5V -5 RL = 1k, VS = 5V 1 -6 1000 -1 10 Figure 10. Small Signal Frequency Response for VS and RL 9 3 2 G = +1 RL = 1k 8 1 -1 5 GAIN (dB) 6 -2 RS = 301 RS = 249 -4 3 RF = RG = 249 RF = RG = 499 2 1 -6 0 1000 Figure 8. Small Signal Frequency Response for Various RS Values -1 10 02866-008 100 FREQUENCY (MHz) RF = RG = 324 4 -5 -7 10 G = +2 7 RS = 200 0 -3 1000 100 FREQUENCY (MHz) RF = RG = 649 100 FREQUENCY (MHz) 1000 02866-011 100 FREQUENCY (MHz) 02866-007 10 02866-010 0 Figure 7. Small Signal Frequency Response for VS and RL GAIN (dB) RL = 1k, VS = +5V 6 GAIN (dB) GAIN (dB) 0 -7 G = +2 7 RL = 1k, VS = 5V -2 1000 100 FREQUENCY (MHz) 02866-009 -5 -7 6.0 5.7 02866-006 NORMALIZED GAIN (dB) 1 G = +2 Figure 11. Small Signal Frequency Response for Various Feedback Resistors, RF = RG Rev. E | Page 7 of 20 AD8007/AD8008 10M 20pF AND 20 SNUB 8 20pF AND 10 SNUB 1M TRANSIMPEDANCE () 6 5 499 499 3 RSNUB 0pF 200 2 49.9 1 1 PHASE 10k 1000 -90 1k -150 -180 100 -210 10 -270 CLOAD 10 100 FREQUENCY (MHz) 1 10k 100k Figure 12. Small Signal Frequency Response for Capacitive Load and Snub Resistor 3 -1 5 GAIN (dB) 6 VS = +5V, -40C VS = 5V, -40C 2 1 -6 0 -7 -1 1000 Figure 13. Small Signal Frequency Response over Temperature, VS = +5 V, VS = 5 V 3 10 100 FREQUENCY (MHz) 1000 G = +2 8 G = +1 G = +2 7 0 6 GAIN (dB) -1 G = +10 -2 G = -1 -3 5 4 2 -5 1 -6 0 1 10 100 FREQUENCY (MHz) 1000 -1 Figure 14. Large Signal Frequency Response for Various Gains RL = 150, VS = 5V, VO = 2V p-p 3 -4 02866-014 NORMALIZED GAIN (dB) VS = 5V, -40C 9 1 -7 VS = +5V, -40C Figure 16. Small Signal Frequency Response over Temperature, VS = +5 V, VS = 5 V VOUT = 2V p-p 2 VS = 5V, +85C 3 -5 100 FREQUENCY (MHz) VS = +5V, +85C 4 -4 02866-013 GAIN (dB) 7 0 10 -330 1G 2G G = +2 8 1 -3 100M 9 VS = 5V, +85C -2 1M 10M FREQUENCY (Hz) Figure 15. Transimpedance and Phase vs. Frequency VS = +5V, +85C G = +1 2 0 -30 RL = 1k, VS = 5V, VO = 2V p-p RL = 150, VS = +5V, VO = 1V p-p RL = 1k, VS = +5V, VO = 1V p-p 10 100 FREQUENCY (MHz) 1000 Figure 17. Large Signal Frequency Response for VS and RL Rev. E | Page 8 of 20 02866-017 0 30 TRANSIMPEDANCE 100k 02866-012 GAIN (dB) 7 4 90 PHASE (Degrees) 9 20pF 02866-016 G = +2 02866-015 10 AD8007/AD8008 -40 -40 G = +1 VS = 5V VO = 1V p-p -50 HD2, RL = 150 G = +2 VS = 5V VO = 1V p-p -50 HD3, RL = 150 DISTORTION (dBc) -70 HD3, RL = 1k -80 -70 -80 -90 -90 -100 -100 100 -110 -40 100 G = +2 VS = 5V VO = 2V p-p -50 -60 DISTORTION (dBc) HD2, RL = 150 -70 HD2, RL = 1k -80 HD3, RL = 150 HD2, RL = 1k -70 HD2, RL = 150 -80 -90 -90 HD3, RL = 1k 1 10 FREQUENCY (MHz) -100 100 -110 02866-019 -100 Figure 19. AD8007 Second and Third Harmonic Distortion vs. Frequency and RL -30 -70 -80 HD3, G = +1 -90 10 FREQUENCY (MHz) -70 HD2, VO = 2V p-p -80 HD3, VO = 2V p-p -100 100 -110 02866-020 1 HD2, VO = 4V p-p -60 -90 HD2, G = +1 -100 100 HD3, VO = 4V p-p -50 HD3, G = +10 10 FREQUENCY (MHz) G = +2 VS = 5V RL = 150 -40 DISTORTION (dBc) -60 1 -30 HD2, G = +10 -50 HD3, RL = 1k Figure 22. AD8007 Second and Third Harmonic Distortion vs. Frequency and RL VS = 5V VO = 2V p-p RL = 150 -40 HD3, RL = 150 02866-022 -60 DISTORTION (dBc) 10 FREQUENCY (MHz) Figure 21. AD8007 Second and Third Harmonic Distortion vs. Frequency and RL G = +1 VS = 5V VO = 2V p-p -50 DISTORTION (dBc) 1 02866-021 10 FREQUENCY (MHz) 02866-018 1 -40 -110 HD3, RL = 150 HD3, RL = 1k Figure 18. AD8007 Second and Third Harmonic Distortion vs. Frequency and RL -110 HD2, RL = 150 1 10 FREQUENCY (MHz) 100 02866-023 DISTORTION (dBc) HD2, RL = 1k -110 HD2, RL = 1k -60 -60 Figure 20. AD8007 Second and Third Harmonic Distortion vs. Frequency and Gain Figure 23. AD8007 Second and Third Harmonic Distortion vs. Frequency and VO Rev. E | Page 9 of 20 AD8007/AD8008 VS = 5 V, RS = 200 , RF = 499 , RL = 150 , @ 25C, unless otherwise noted. -40 -40 G=1 VS = 5V VO = 1V p-p -50 -60 -60 DISTORTION (dBc) HD2, RL = 150 -70 HD2, RL = 1k -80 -90 HD2, RL = 150 -70 HD2, RL = 1k -80 -90 HD3, RL = 1k HD3, RL = 1k -100 -100 HD3, RL = 150 1 10 HD3, RL = 150 100 FREQUENCY (MHz) -110 02866-024 -110 Figure 24. AD8008 Second and Third Harmonic Distortion vs. Frequency and RL 10 FREQUENCY (MHz) 100 Figure 27. AD8008 Second and Third Harmonic Distortion vs. Frequency and RL -40 -40 G=2 VS = 5V -50 VO = 2V p-p G=1 VS = 5V VO = 1V p-p -50 -60 DISTORTION (dBc) -60 DISTORTION (dBc) 1 02866-027 DISTORTION (dBc) G=2 VS = 5V VO = 1V p-p -50 -70 HD2, RL = 150 -80 HD2, RL = 1k HD2, RL = 1k -70 HD2, RL = 150 -80 -90 -90 -100 -100 HD3, RL = 1k HD3, RL = 150 HD3, RL = 150 10 FREQUENCY (MHz) 100 02866-025 1 -110 Figure 25. AD8008 Second and Third Harmonic Distortion vs. Frequency and RL 100 Figure 28. AD8008 Second and Third Harmonic Distortion vs. Frequency and RL VS = 5V VO = 2V p-p RL = 150 -40 G=2 RL = 150 VS = 5V -40 -50 -50 HD2, G = 10 DISTORTION (dBc) -60 -70 -80 HD2, G = 1 -60 HD2, VO = 4V p-p -70 HD2, VO = 2V p-p -80 -90 -90 HD3, VO = 4V p-p -100 -100 1 HD3, VO = 2V p-p HD3, G = 1 10 FREQUENCY (MHz) 100 -110 02866-026 HD3, G = 10 Figure 26. AD8008 Second and Third Harmonic Distortion vs. Frequency and Gain 1 10 FREQUENCY (MHz) 100 02866-029 DISTORTION (dBc) 10 FREQUENCY (MHz) -30 -30 -110 1 02866-028 HD3, RL = 1k -110 Figure 29. AD8008 Second and Third Harmonic Distortion vs. Frequency and VO Rev. E | Page 10 of 20 AD8007/AD8008 -60 -65 G = +2 VS = 5V FO = 20MHz -65 HD3, RL = 1k -75 HD2, RL = 1k -70 DISTORTION (dBc) DISTORTION (dBc) G = +2 VS = 5V FO = 20MHz -70 HD3, RL = 150 -75 -80 HD2, RL = 150 HD3, RL = 1k HD2, RL = 150 -80 -85 HD2, RL = 1k -90 HD3, RL = 150 -95 -100 -85 2.0 1.5 2.5 VOUT (V p-p) Figure 30. AD8007 Second and Third Harmonic Distortion vs. VOUT and RL 44 40 39 38 37 36 5 4 VOUT (V p-p) 6 G = +2 VS = 5V VO = 2V p-p RL = 1k 42 41 40 39 38 37 20 25 30 35 40 45 50 FREQUENCY (MHz) 55 60 65 70 35 5 Figure 31. AD8007 Third-Order Intercept vs. Frequency 15 20 25 30 35 40 45 50 FREQUENCY (MHz) 60 65 70 Figure 34. AD8008 Third-Order Intercept vs. Frequency HD2, RL = 1k -70 HD2, RL = 150 HD2, RL = 150 -75 DISTORTION (dBc) HD2, RL = 1k -75 -80 HD3, RL = 150 HD3, RL = 1k -80 HD3, RL = 150 -85 HD3, RL = 1k -90 -95 -100 -85 G = +2 VS = 5V FO = 20MHz -105 1.5 2.0 VOUT (V p-p) 2.5 -110 02866-032 -90 1.0 55 -65 G = +2 VS = 5V FO = 20MHz -70 10 Figure 32. AD8008 Second and Third Harmonic Distortion vs. VOUT and RL 1 2 3 4 VOUT (V p-p) 5 6 02866-035 15 02866-031 10 5 02866-034 36 35 DISTORTION (dBc) 3 43 41 -65 2 44 THIRD-ORDER INTERCEPT (dBm) 42 1 Figure 33. AD8007 Second and Third Harmonic Distortion vs. VOUT and RL G = +2 VS = 5V VO = 2V p-p RL = 1k 43 THIRD ORDER INTERCEPT (dBm) -110 02866-030 -90 1.0 02866-033 -105 Figure 35. AD8008 Second and Third Harmonic Distortion vs. VOUT and RL Rev. E | Page 11 of 20 AD8007/AD8008 VS = 5 V, RL = 150 , RS = 200 , RF = 499 , unless otherwise noted. 1000 2.7nV/ Hz 1 10 10k 1k FREQUENCY (Hz) 100 100k 1M 100 INVERTING CURRENT NOISE 22.5pA / Hz 10 1 10 NONINVERTING CURRENT NOISE 2.0pA/ Hz Figure 36. Input Voltage Noise vs. Frequency 1k 1M 10k 100k FREQUENCY (Hz) 10M Figure 39. Input Current Noise vs. Frequency -20 G = +2 R = 150 -30 V = 5V S VM = 1V p-p -40 G = +2 CROSSTALK (dB) 100 OUTPUT IMPEDANCE () 1k 100 02866-039 CURRENT NOISE (pA/ Hz) 10 02866-036 VOLTAGE NOISE (nV/ Hz) 100 10 1 SIDE B DRIVEN -50 -60 SIDE A DRIVEN -70 -80 0.1 1M 10M FREQUENCY (Hz) 100M 1G -100 100k 02866-037 0.01 100k Figure 37. Output Impedance vs. Frequency 1M 10M FREQUENCY (Hz) 100M 1G 02866-040 -90 Figure 40. AD8008 Crosstalk vs. Frequency (Output to Output) 0 20 VS = 5V, +5V 10 -10 0 PSRR (dB) -10 -30 -40 -20 -30 +PSRR -40 -50 -50 -60 -60 1M 10M FREQUENCY (Hz) 100M 1G -80 10k Figure 38. CMRR vs. Frequency 100k 10M 1M FREQUENCY (Hz) Figure 41. PSRR vs. Frequency Rev. E | Page 12 of 20 100M 1G 02866-041 -70 100k -PSRR -70 02866-038 CMRR (dB) -20 AD8007/AD8008 G = +2 RL = 150, VS = +5V AND 5V RL = 150, VS = +5V AND 5V RL = 1k, VS = +5V AND 5V RL = 150, VS = +5V AND 5V 50mV/DIV 20 30 TIME (ns) 10 40 50 02866-042 0 50mV/DIV 0 20 30 TIME (ns) 40 50 Figure 45. Small Signal Transient Response for RL = 150 , RL = 1 k and VS = +5 V, VS = 5 V Figure 42. Small Signal Transient Response for RL = 150 , RL = 1 k and VS = +5 V, VS = 5 V G = +1 10 02866-045 G = +1 G = -1 RL = 150 INPUT RL = 1k OUTPUT 0 10 20 30 TIME (ns) 40 50 02866-043 1V/DIV 0 20 30 TIME (ns) 40 50 Figure 46. Large Signal Transient Response, G = -1, RL = 150 Figure 43. Large Signal Transient Response for RL = 150 , RL = 1 k G = +2 10 02866-046 1V/DIV G = +2 CLOAD = 0pF CL = 0pF CL = 20pF CLOAD = 10pF CLOAD = 20pF CL = 20pF RSNUB = 10 499 499 200 RSNUB - + CLOAD 49.9 10 20 30 TIME (ns) 40 Figure 44. Large Signal Transient Response for CLOAD = 0 pF, CLOAD = 10 pF, and CLOAD = 20 pF 50 02866-044 0 0 10 20 30 TIME (ns) 40 50 02866-047 50mV/DIV 1V/DIV Figure 47. Small Signal Transient Response, Effect of Series Snub Resistor when Driving Capacitive Load Rev. E | Page 13 of 20 AD8007/AD8008 4 G = +2 G = +10 VS = 5V VIN = 0.75V 3 +VS RL = 1k 2 RL = 150 VOUT ( V) 1 0 -1 OUTPUT (2V/DIV) INPUT (1V/DIV) -VS -2 400 500 -3 -4 0 Figure 48. Output Overdrive Recovery, RL = 1 k, 150 , VIN = 2.5 V 200 400 600 800 1000 RL () Figure 50. VOUT Swing vs. RL, VS = 5 V, G = +10, VIN = 0.75 V 0.5 G = +2 0.4 0.2 0.1 0 -0.1 18ns -0.2 -0.3 -0.4 -0.5 0 5 10 15 20 25 TIME (ns) 30 35 40 45 02866-049 SETTLING TIME (%) 0.3 Figure 49. 0.1% Settling Time, 2 V Step Rev. E | Page 14 of 20 02866-050 300 200 TIME (ns) 100 02866-048 0 AD8007/AD8008 THEORY OF OPERATION The AD8007 (single) and AD8008 (dual) are current feedback amplifiers optimized for low distortion performance. A simplified conceptual diagram of the AD8007 is shown in Figure 51. It closely resembles a classic current feedback amplifier comprised of a complementary emitter-follower input stage, a pair of signal mirrors, and a diamond output stage. However, in the case of the AD8007/AD8008, several modifications were made to improve the distortion performance over that of a classic current feedback topology. +VS M1 USING THE AD8007/AD8008 Supply Decoupling for Low Distortion Decoupling for low distortion performance requires careful consideration. The commonly adopted practice of returning the high frequency supply decoupling capacitors to physically separate (and possibly distant) grounds can lead to degraded even-order harmonic performance. This situation is shown in Figure 52 using the AD8007 as an example; however, it is not recommended. For a sinusoidal input, each decoupling capacitor returns to its ground a quasi-rectified current carrying high even-order harmonics. RF 499 - I3 I1 - GND 1 CJ1 +VS Q1 D1 IDI IN+ Q5 RG 499 IDO HIGH-Z IN- OUT D2 Q2 Q4 -VS 10F + 0.1F Q3 CJ2 IN Q6 +VS RS 200 AD8007 OUT -VS -VS 02866-052 M2 10F + 0.1F - I4 GND 2 RF 02866-051 RG Figure 51. Simplified Schematic of AD8007 The signal mirrors were replaced with low distortion, high precision mirrors. In Figure 51, they are shown as M1 and M2. Their primary function from a distortion standpoint is to reduce the effect of highly nonlinear distortion caused by capacitances, CJ1 and CJ2. These capacitors represent the collector-to-base capacitances of the output devices of the mirrors. Figure 52. High Frequency Capacitors Returned to Physically Separate Grounds (Not Recommended) The decoupling scheme shown in Figure 53 is recommended. In Figure 53, the two high frequency decoupling capacitors are first tied together at a common node and are then returned to the ground plane through a single connection. By first adding the two currents flowing through each high frequency decoupling capacitor, this ensures that the current returned into the ground plane is only at the fundamental frequency. RF 499 A voltage imbalance arises across the output stage, as measured from the high impedance node, high-Z, to the output node, OUT. This imbalance is a result of delivering high output currents and is the primary cause of output distortion. Circuitry is included to sense this output voltage imbalance and generate a compensating current, IDO. When injected into the circuit, IDO reduces the distortion that could be generated at the output stage. Similarly, the nonlinear voltage imbalance across the input stage (measured from the noninverting to the inverting input) is sensed, and a current, IDI, is injected to compensate for input-generated distortion. The design and layout are strictly top-to-bottom symmetric to minimize the presence of even-order harmonics. 10F + RG 499 IN +VS 0.1F RS 200 AD8007 OUT 0.1F -VS 10F + 02866-053 I2 - Figure 53. High Frequency Capacitors Returned to Ground at a Single Point (Recommended) Rev. E | Page 15 of 20 AD8007/AD8008 Whenever physical layout considerations prevent the decoupling scheme shown in Figure 53, the user can connect one of the high frequency decoupling capacitors directly across the supplies and connect the other high frequency decoupling capacitor to ground (see Figure 54). RF 499 C1 0.1F RG 499 IN RS 200 AD8007 The standard noninverting configuration with recommended power supply bypassing is shown in Figure 54. The 0.1 F high frequency decoupling capacitors should be X7R or NPO chip components. Connect C2 from the +VS pin to the -VS pin. Connect C1 from the +VS pin to signal ground. The length of the high frequency bypass capacitor leads is critical. Parasitic inductance due to long leads works against the low impedance created by the bypass capacitor. The ground for the load impedance should be at the same physical location as the bypass capacitor grounds. For larger value capacitors, which are intended to be effective at lower frequencies, the current return path distance is less critical. 10F + +VS LAYOUT CONSIDERATIONS OUT C2 0.1F 10F + 02866-054 -VS Figure 54. High Frequency Capacitors Connected Across the Supplies (Recommended) Rev. E | Page 16 of 20 AD8007/AD8008 LAYOUT AND GROUNDING CONSIDERATIONS GROUNDING EXTERNAL COMPONENTS AND STABILITY A ground plane layer is important in densely packed printed circuit boards (PCB) to minimize parasitic inductances. However, an understanding of where the current flows in a circuit is critical to implementing effective high speed circuit design. The length of the current path is directly proportional to the magnitude of parasitic inductances and thus the high frequency impedance of the path. High speed currents in an inductive ground return create unwanted voltage noise. Broad ground plane areas reduce parasitic inductance. The AD8007/AD8008 are current feedback amplifiers and, to a first order, the feedback resistor determines the bandwidth and stability. The gain, load impedance, supply voltage, and input impedances also have an effect. INPUT CAPACITANCE Along with bypassing and ground, high speed amplifiers can be sensitive to parasitic capacitance between the inputs and ground. Even 1 pF or 2 pF of capacitance reduces the input impedance at high frequencies, in turn increasing the gain of the amplifier, which causes peaking of the frequency response or even oscillations if severe enough. Place the external passive components that are connected to the input pins as close as possible to the inputs to avoid parasitic capacitance. The ground and power planes must be kept at a distance of at least 0.05 mm from the input pins on all layers of the board. OUTPUT CAPACITANCE To a lesser extent, parasitic capacitances on the output can cause peaking of the frequency response. The following two methods minimize its effect: * * Put a small value resistor in series with the output to isolate the load capacitance from the output stage of the amplifier (see Figure 12). Increase the phase margin by increasing the gain of the amplifier or by increasing the value of the feedback resistor. Figure 11 shows the effect of changing RF on the bandwidth and peaking for a gain of 2. Increasing RF reduces peaking but also reduces bandwidth. Figure 6 shows that for a given RF increasing the gain also reduces peaking and bandwidth. Table 4 shows the recommended RF and RG values that optimize bandwidth with minimal peaking. Table 4. Recommended Component Values Gain -1 +1 +2 +5 +10 RF () 499 499 499 499 499 RG () 499 Not applicable 499 124 54.9 RS () 200 200 200 200 200 The load resistor also affects bandwidth, as shown in Figure 7 and Figure 10. A comparison between Figure 7 and Figure 10 also demonstrates the effect of gain and supply voltage. When driving loads with a capacitive component, stability improves by using a series snub resistor, RSNUB, at the output. The frequency and pulse responses for various capacitive loads are illustrated in Figure 12 and Figure 47, respectively. For noninverting configurations, a resistor in series with the input, RS, is needed to optimize stability for a gain of 1, as illustrated in Figure 8. For larger noninverting gains, the effect of a series resistor is reduced. INPUT-TO-OUTPUT COUPLING To minimize capacitive coupling, the input and output signal traces should not be parallel. When they are not parallel, they help reduce unwanted positive feedback. Rev. E | Page 17 of 20 AD8007/AD8008 OUTLINE DIMENSIONS 5.00 (0.1968) 4.80 (0.1890) 8 4.00 (0.1574) 3.80 (0.1497) 5 1 4 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) 6.20 (0.2441) 5.80 (0.2284) 1.75 (0.0688) 1.35 (0.0532) 0.51 (0.0201) 0.31 (0.0122) COPLANARITY 0.10 SEATING PLANE 0.50 (0.0196) 0.25 (0.0099) 45 8 0 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) 012407-A COMPLIANT TO JEDEC STANDARDS MS-012-A A CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 55. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) 3.20 3.00 2.80 3.20 3.00 2.80 8 1 5.15 4.90 4.65 5 4 PIN 1 IDENTIFIER 0.65 BSC 0.95 0.85 0.75 15 MAX 1.10 MAX 0.40 0.25 6 0 0.23 0.13 COMPLIANT TO JEDEC STANDARDS MO-187-AA Figure 56. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters Rev. E | Page 18 of 20 0.70 0.55 0.40 091709-A 0.15 0.05 COPLANARITY 0.10 AD8007/AD8008 2.20 2.00 1.80 1.35 1.25 1.15 5 4 1 2 3 2.40 2.10 1.80 0.65 BSC 0.10 MAX COPLANARITY 0.10 0.40 0.10 1.10 0.80 0.30 0.15 SEATING PLANE 0.22 0.08 0.46 0.36 0.26 072809-A 1.00 0.90 0.70 COMPLIANT TO JEDEC STANDARDS MO-203-AA Figure 57. 5-Lead Thin Shrink Small Outline Transistor Package [SC70] (KS-5) Dimensions shown in millimeters ORDERING GUIDE Model AD8007AKS-R2 AD8007AKSZ-R2 1 AD8007AKSZ-REEL1 AD8007AKSZ-REEL71 AD8007AR AD8007AR-REEL AD8007AR-REEL7 AD8007ARZ1 AD8007ARZ-REEL1 AD8007ARZ-REEL71 AD8008AR AD8008AR-REEL7 AD8008AR-REEL AD8008ARZ1 AD8008ARZ-REEL71 AD8008ARZ-REEL1 AD8008ARM AD8008ARM-REEL AD8008ARM-REEL7 AD8008ARMZ1 AD8008ARMZ-REEL1 AD8008ARMZ-REEL71 1 Temperature Range -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C Package Description 5-Lead SC70 5-Lead SC70 5-Lead SC70 5-Lead SC70 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC 8-Lead MSOP 8-Lead MSOP 8-Lead MSOP 8-Lead MSOP 8-Lead MSOP 8-Lead MSOP Z = RoHS Compliant Part, # denotes RoHS compliant part may be top or bottom marked. Rev. E | Page 19 of 20 Package Outline KS-5 KS-5 KS-5 KS-5 R-8 R-8 R-8 R-8 R-8 R-8 R-8 R-8 R-8 R-8 R-8 R-8 RM-8 RM-8 RM-8 RM-8 RM-8 RM-8 Branding HTA HTC HTC HTC H2B H2B H2B H2B# H2B# H2B# AD8007/AD8008 NOTES (c)2002-2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D02866-0-11/09(E) Rev. E | Page 20 of 20