Type T495 Solid Tantalum Chip Capacitors Low ESR, High Ripple Current, Solid Tantalum Chip Capacitors Highlights Designed for very low ESR High ripple current capability High surge current capability Taped and reeled per EIA RS 481-1 Low ESL (<2.5 nH ESL) High operating temperature +125 C Like the T491 standard tantalum capacitors the Type T495's physical outline and dimensions conform to the global standard for tantalum capacitor chips and exceed the requirements for EIA standard 535BAAC, but performance sets the T495 apart. The very low ESR, high ripple current capability, capacitance stability, and ability to withstand high inrush currents makes the T495 ideal for output filtering in switch-mode power supplies and DC-DC converters and in battery-stiffening filters. This capability is from unique design and high-stress, low impedance electrical conditioning. Reliability and thermal stability are assured by lead-frame attachments to the tantalum pellet made by microprocessor-controlled welding and high temperature silver epoxy adhesive. Standard packaging is compatible with all tape-fed placement units and with EIA 481-1 tape and reel specifications. Specifications Capacitance Range: 4.7 F to 470 F Tolerance: 10% standard, 20% available Voltage Range: 6 Vdc to 50 Vdc Operating Temperature: -55 C to +125 C (with proper derating) Cap Change From Initial Limit: -10% @ -55 C; +10% @ +85 C +12% @ +125 C DC Leakage: At 25 C -- See Ratings At 85 C -- 10 x 25 C Limit At 125 C -- 12 x 25 C Limit Dissipation Factor: 0.1 F to 1.0 F -- 4% 1.5 F to 68 F -- 6% 100 F to 330 F -- 8% Standard Packaging Tape and Reel: EIA RS-481-1 Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). Case EIA Qty per Tape Code IECQ 7" Reel Width Pitch D 7343 500 12mm 8mm X 7343H 500 12mm 8mm V 7343L 2,500 8mm 4mm 13" Reels Available on Special Order Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8564 * Fax: (508)996-3830 * www.cde.com Type T495 Solid Tantalum Chip Capacitors Capacitor Outline Drawing Cathode (-) End View B W X A B E H K Bottom View Anode (+) End View Side View T F P G S S R Dimensions Millimeters (Inches) Case EIA/ B X L W H K F S (Ref) (Ref) 7.3 0.3 4.3 0.3 2.8 0.3 1.5 0.2 2.4 0.1 1.3 0.3 0.5 0.15 0.10 0.10 Code IECQ D 7343-31 X 7343-43 L Notch at Supplier's Option P R T A G E (Ref) (Ref) (Ref) (Min) (Ref) (Ref) 0.9 1 0.13 3.8 3.5 3.5 (.287 .012) (.169 .012) (.110 .012) (.059 .008) (.094 .004) (.051 .012) (.020 .006) (.004 .004) (0.035) (0.039) (0.005) (0.150) (0.138) (0.138) 7.3 0.3 4.3 0.3 4.0 0.3 2.3 0.2 2.4 0.1 1.3 0.3 0.5 0.15 0.10 0.10 1.7 1 0.13 3.8 3.5** 3.5** (.287 .012) (.169 .012) (.157 .012) (.091 .008) (.094 .004) (.051 .012) (.020 .006) (.004 .004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138) Notes: 1 Metric dimensions govern. 2 (Ref) - Dimensions provided for reference only. ** Round Glue Pad 2.9 0.1mm (.114 .004) in diameter at Supplier's option. Low Profile Capacitor Dimensions Case Millimeters (Inches) EIA/ X T A G E Code IECQ L W H Max. K Min. F 0.1 S 0.3 (Ref) (Ref) (Min) (Ref) (Ref) V 7343-20 7.3 0.3 4.3 0.3 2.0 1.1 2.4 1.3 0.05 0.13 3.8 3.5 3.5 (0.079) (0.043) (0.094) (0.051) (0.002) (0.005) (.150) (0.138) (0.138) (.287 0.012) (.169 0.012) Notes: 1 Metric dimensions govern. 2 (Ref) - Dimensions provided for reference only. 3 No dimensions provided for B, P or R because low profile cases do not have a bevel or notch. Part Numbering System T495 D 106 K Series Case Capacitance Tolerance T495 035 A Voltage Failure Rate Level D 685 = 6.8 F K = 10% 006 = 6 Vdc A = Not Applicable X 226 = 22 F M = 20% 035 = 35 Vdc V 227 = 220 F S -F RoHS Compliant (100% Matte Tin finish on terminals) Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8564 * Fax: (508)996-3830 * www.cde.com Type T495 Solid Tantalum Chip Capacitors Ratings Case Code Cap Cap CDE (F) Tol. EIA IECQ Catalog Part Number 6/6.3 WVdc @ +85 C 7343 Max DF Max ESR Max Amps Leakage @ 25 C @ 25 C @ 25 C @ 25 C 120 Hz 100 kHz 100 kHz (A) (%) () (A) 0.175 0.9 (4 WVdc @ 125 C) 68 10% D 100 10% V 7343L T495V107K006AS-F 6.0 8 0.150 0.9 150 10% X 7343H T495X157K006AS-F 7.2 6 0.100 1.3 7343 T495D686K006AS-F Max DC 3.3 4 220 10% D T495D227K006AS-F 13.2 8 0.100 1.2 220 10% X 7343H T495X227K006AS-F 13.2 8 0.100 1.3 330 10% X 7343H T495X337K006AS-F 19.8 8 0.100 1.3 470 10% X 7343H T495X477K006AS-F 28.2 10 0.065 1.6 10 WVdc @ +85 C (7 WVdc @ 125 C) 47 10% D 7343 T495D476K010AS-F 3.8 4 0.20 0.9 68 10% D 7343 T495D686K010AS-F 6.8 6 0.15 1.0 68 10% X 100 10% D 100 10% X 150 10% D 150 10% 220 10% 7343H T495X686K010AS-F 7343 T495D107K010AS-F 7343H T495X107K010AS-F 5.4 4 0.15 1.1 10.0 8 0.10 1.2 8.0 6 0.10 1.3 T495D157K010AS-F 15.0 8 0.10 1.2 X 7343H T495X157K010AS-F 15.0 8 0.10 1.3 X 7343H T495X227K010AS-F 22.0 8 0.10 1.3 7343 16 WVdc @ +85 C (10 WVdc @ 125 C) 33 10% D 7343 T495D336K016AS-F 4.2 4 0.225 0.8 47 10% D 7343 T495D476K016AS-F 7.5 6 0.150 1.0 100 10% D 7343 T495D107K016AS-F 16.0 8 0.125 1.1 100 10% X 7343H T495X107K016AS-F 16.0 8 0.100 1.3 20 WVdc @ +85 C (13 WVdc @ 125 C) 15 10% D 7343 T495D156K020AS-F 2.4 4 0.275 0.7 22 10% D 7343 T495D226K020AS-F 3.5 4 0.225 0.8 7343 33 10% D T495D336K020AS-F 6.6 6 0.200 0.9 47 10% X 7343H T495X476K020AS-F 7.5 4 0.150 1.0 68 10% X 7343H T495X686K020AS-F 13.6 6 0.150 1.0 25 WVdc @ +85 C 15 10% D 15 10% X 22 10% D 7343 (17 WVdc @ 125 C) T495D156K025AS-F 3.8 6 0.275 0.7 7343H T495X156K025AS-F 3.0 4 0.200 0.9 5.5 6 0.200 0.9 7343 T495D226K025AS-F 22 10% X 7343H T495X226K025AS-F 4.4 4 0.225 0.9 33 10% X 7343H T495X336K025AS-F 6.6 4 0.175 1.0 6.8 10% X 7343H T495X685K035AS-F 0.300 0.7 35 WVdc @ +85 C 10 10% D 10 10% X 15 10% D 7343 (23 WVdc @ 125 C) 1.9 4 T495D106K035AS-F 3.5 6 0.300 0.7 7343H T495X106K035AS-F 2.8 4 0.250 0.8 5.3 6 0.300 0.7 7343 T495D156K035AS-F 15 10% X 7343H T495X156K035AS-F 5.3 6 0.225 0.9 22 10% X 7343H T495X226K035AS-F 7.7 6 0.275 0.8 X 7343H T495X475K050AS-F 0.300 0.7 50 WVdc @ +85 C 4.7 10% (33 WVdc @ 125 C) 1.9 4 Note: CDE reserves the right to offer higher rated voltage substitutes within the same case size. The marking will indicate the higher voltage. Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8564 * Fax: (508)996-3830 * www.cde.com Type T495 Solid Tantalum Chip Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8564 * Fax: (508)996-3830 * www.cde.com