www.eicsemi.com 1.5KE SERIES TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 440 Volts PPK : 1500 Watts DO-201 FEATURES : * Glass passivated junction chip * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical I R less then 1A above 10V * Pb / RoHS Free 1.00 (25.4) MIN. 0.21 (5.33) 0.19 (4.83) 0.375 (9.53) 0.285 (7.24) 1.00 (25.4) MIN. 0.042 (1.07) 0.038 (0.97) MECHANICAL DATA * Case : DO-201Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.93 grams Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bi-directional use C or CA Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 C, Tp=1ms (Note1) Steady State Power Dissipation at TL = 75 C Symbol Value Unit PPK Minimum 1500 W PD 5.0 W IFSM 200 A TJ, TSTG - 65 to + 175 C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1 (2) Mounted on Copper Leaf area of 1.57 i2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 4 Rev. 06 : September 28, 2009 www.eicsemi.com ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified) Breakdown Voltage @ It ( Note 1 ) Type Number VBR (V) Working Peak Reverse Voltage VRWM Maximum Reverse Leakage @ VRWM IR Maximum Reverse Current IRSM Maximum Clamping Voltage @ IRSM VRSM Maximum Temperature Co-efficient of VBR Min. Max. It (mA) (V) (A) (A) (V) (% / C) 1.5KE6.8 6.12 7.48 10 5.50 1000 139 10.8 0.057 1.5KE6.8A 6.45 7.14 10 5.80 1000 143 10.5 0.057 1.5KE7.5 6.75 8.25 10 6.05 500 128 11.7 0.061 1.5KE7.5A 7.13 7.88 10 6.40 500 132 11.3 0.061 1.5KE8.2 7.38 9.02 10 6.63 200 120 12.5 0.065 1.5KE8.2A 7.79 8.61 10 7.02 200 124 12.1 0.065 1.5KE9.1 8.19 10.0 1.0 7.37 50 109 13.8 0.068 1.5KE9.1A 8.65 9.55 1.0 7.78 50 112 13.4 0.068 1.5KE10 9.00 11.0 1.0 8.10 10 100 15.0 0.073 1.5KE10A 9.50 10.5 1.0 8.55 10 103 14.5 0.073 1.5KE11 9.90 12.1 1.0 8.92 5.0 93.0 16.2 0.075 1.5KE11A 10.5 11.6 1.0 9.40 5.0 96.0 15.6 0.075 1.5KE12 10.8 13.2 1.0 9.72 5.0 87.0 17.3 0.078 1.5KE12A 11.4 12.6 1.0 10.2 5.0 90.0 16.7 0.078 1.5KE13 11.7 14.3 1.0 10.5 5.0 79.0 19.0 0.081 1.5KE13A 12.4 13.7 1.0 11.1 5.0 82.0 18.2 0.081 1.5KE15 13.5 16.5 1.0 12.1 1.0 68.0 22.0 0.084 1.5KE15A 14.3 15.8 1.0 12.8 1.0 71.0 21.2 0.084 1.5KE16 14.4 17.6 1.0 12.9 1.0 64.0 23.5 0.086 1.5KE16A 15.2 16.8 1.0 13.6 1.0 67.0 22.5 0.086 1.5KE18 16.2 19.8 1.0 14.5 1.0 56.5 26.5 0.088 1.5KE18A 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.088 1.5KE20 18.0 22.0 1.0 16.2 1.0 51.5 29.1 0.090 1.5KE20A 19.0 21.0 1.0 17.1 1.0 54.0 27.7 0.090 1.5KE22 19.8 24.2 1.0 17.8 1.0 47.0 31.9 0.092 1.5KE22A 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092 1.5KE24 21.6 26.4 1.0 19.4 1.0 43.0 34.7 0.094 1.5KE24A 22.8 25.2 1.0 20.5 1.0 45.0 33.2 0.094 1.5KE27 24.3 29.7 1.0 21.8 1.0 38.5 39.1 0.096 1.5KE27A 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096 1.5KE30 27.0 33.0 1.0 24.3 1.0 34.5 43.5 0.097 1.5KE30A 28.5 31.5 1.0 25.6 1.0 36.0 41.4 0.097 1.5KE33 29.7 36.3 1.0 26.8 1.0 31.5 47.7 0.098 1.5KE33A 31.4 34.7 1.0 28.2 1.0 33.0 45.7 0.098 1.5KE36 32.4 39.6 1.0 29.1 1.0 29.0 52.0 0.099 1.5KE36A 34.2 37.8 1.0 30.8 1.0 30.0 49.9 0.099 1.5KE39 35.1 42.9 1.0 31.6 1.0 26.5 56.4 0.100 1.5KE39A 37.1 41.0 1.0 33.3 1.0 28.0 53.9 0.100 1.5KE43 38.7 47.3 1.0 34.8 1.0 24.0 61.9 0.101 1.5KE43A 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101 1.5KE47 42.3 51.7 1.0 38.1 1.0 22.2 67.8 0.101 1.5KE47A 44.7 49.4 1.0 40.2 1.0 23.2 64.8 0.101 1.5KE51 45.9 56.1 1.0 41.3 1.0 20.4 73.5 0.102 1.5KE51A 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102 1.5KE56 50.4 61.6 1.0 45.4 1.0 18.6 80.5 0.103 1.5KE56A 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103 Page 2 of 4 Rev. 06 : September 28, 2009 www.eicsemi.com ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified) Breakdown Voltage @ It ( Note 1 ) Type Number VBR (V) Working Peak Reverse Voltage VRWM Maximum Reverse Leakage @ VRWM IR Maximum Reverse Current IRSM Maximum Clamping Voltage @ IRSM VRSM Maximum Temperature Co-efficient of VBR Min. Max. It (mA) (V) (A) (A) (V) (% / C) 1.5KE62 55.8 68.2 1.0 50.2 1.0 16.9 89.0 0.104 1.5KE62A 58.9 65.1 1.0 53.0 1.0 17.7 85.0 0.104 1.5KE68 61.2 74.8 1.0 55.1 1.0 15.3 98.0 0.104 1.5KE68A 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104 1.5KE75 67.5 82.5 1.0 60.7 1.0 13.9 108 0.105 1.5KE75A 71.3 78.8 1.0 64.1 1.0 14.6 103 0.105 1.5KE82 73.8 90.2 1.0 66.4 1.0 12.7 118 0.105 1.5KE82A 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105 1.5KE91 81.9 100 1.0 73.7 1.0 11.4 131 0.106 1.5KE91A 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106 1.5KE100 90.0 110 1.0 81.0 1.0 10.4 144 0.106 1.5KE100A 95.0 105 1.0 85.5 1.0 11.0 137 0.106 1.5KE110 99.0 121 1.0 89.2 1.0 9.5 158 0.107 1.5KE110A 105 116 1.0 94.0 1.0 9.9 152 0.107 1.5KE120 108 132 1.0 97.2 1.0 8.7 173 0.107 1.5KE120A 114 126 1.0 102 1.0 9.1 165 0.107 1.5KE130 117 143 1.0 105 1.0 8.0 187 0.107 1.5KE130A 124 137 1.0 111 1.0 8.4 179 0.107 1.5KE150 135 165 1.0 121 1.0 7.0 215 0.108 1.5KE150A 143 158 1.0 128 1.0 7.2 207 0.108 1.5KE160 144 176 1.0 130 1.0 6.5 230 0.108 1.5KE160A 152 168 1.0 136 1.0 6.8 219 0.108 1.5KE170 153 187 1.0 138 1.0 6.2 244 0.108 1.5KE170A 162 179 1.0 145 1.0 6.4 234 0.108 1.5KE180 162 198 1.0 146 1.0 5.8 258 0.108 1.5KE180A 171 189 1.0 154 1.0 6.1 246 0.108 1.5KE200 180 220 1.0 162 1.0 5.2 287 0.108 1.5KE200A 190 210 1.0 171 1.0 5.5 274 0.108 1.5KE220 198 242 1.0 175 1.0 4.3 344 0.108 1.5KE220A 209 231 1.0 185 1.0 4.6 328 0.108 1.5KE250 225 275 1.0 202 1.0 4.2 360 0.110 1.5KE250A 237 263 1.0 214 1.0 4.4 344 0.110 1.5KE300 270 330 1.0 243 1.0 3.5 430 0.110 1.5KE300A 285 315 1.0 256 1.0 3.6 414 0.110 1.5KE350 315 385 1.0 284 1.0 3.0 504 0.110 1.5KE350A 332 368 1.0 300 1.0 3.1 482 0.110 1.5KE400 360 440 1.0 324 1.0 2.6 574 0.110 1.5KE400A 380 420 1.0 342 1.0 2.7 548 0.110 1.5KE440 396 484 1.0 356 1.0 2.4 631 0.110 1.5KE440A 418 462 1.0 376 1.0 2.5 602 0.110 Notes: (1) VBR measured after It applied for 300 s., It = square wave pulse or equivalent. (2) VF = 3.5 Vmax., IF = 100 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 100 Amps. ( 100 Volts thru 440 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. (3) "1.5" will be omitted in marking on the diode. Page 3 of 4 Rev. 06 : September 28, 2009 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( 1.5KE SERIES ) FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 240 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 200 160 120 80 40 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 0 0 0 25 50 75 100 125 150 175 1 2 Ta, AMBIENT TEMPERATURE, ( C) 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE 5.00 100 Pp,PEAK POWER (kW) PD, STEADY STATE POWER DISSIPATION (WATTS) 4 3.75 2.50 1.25 Single Phase Half Wave 60 Hz Resistive or Inductive load 10 1.0 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms 0 0 25 50 75 100 125 150 175 tp, PULSE WIDTH 200 TL, LEAD TEMPERATURE (C) Tr = 10s 100 Peak Value IRMS FIG. 6 - TYPICAL JUNCTION CAPACITANCE 10,000 TJ=25 C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM CJ, CAPACITANCE, pF PEAK PULSE CURRENT - % IRMS FIG.5 - PULSE WAVEFORM Half Value - IRMS 2 50 10X1000 Waveform as defined by R.E.A. Measured @ Zero Bias 1,000 Measured at Stand-off Voltage Voltage (V R) 100 tp 0 0 1.0 2.0 T, TIME(ms) 3.0 4.0 10 1 2 10 20 100 200 VBR, BREAKDOWN REVERSE VOLTAGE, (V) Page 4 of 4 Rev. 06 : September 28, 2009