Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-C
ASCTB214E 201201-T1
ORDERING INFORMATION
TYPES
1. Input module
Standard packing: Carton: 50 pcs.; Case: 500 pcs.
Miniature DIL SSR
1A control type for PCBs
AQ-C RELAYS
Type Output voltage Input voltage Part No.
AC input 4 to 32 V DC 80 to 250 V AC AQCD3-IM 100/240 V AC
DC input 4 to 32 V DC 3 to 32 V DC AQCD3-IM 4/24 V DC
Please contact us
about TÜV certified
products.
RoHS compliant
FEATURES
1. Compact DIL type:
L20 mm × W10 mm × H12.8 mm
(.787×.394×.504 inch)
2. Excellent in noise resistance
3. Snubber circuit integrated
4. High dielectric strength: 2,500 V
between input and output
5. Reverse polarity type available
TYPICAL APPLICATIONS
1. Compact AC motor, Solenoid,
Magnet, Driver of magnetic valve
2. Copying equipment
3. NC machine, Robot
4. Programmable controller
5. Air conditioners
Load current
Nil:
1A:
AQC
Load voltage
1:
2:
D1:
D3:
Type
Nil:
IM:
T:
ZT:
Input voltage
Output module:
Input module:
5, 12, 24 V DC
4/24 V DC, 100/240 V AC
Input polarity
Nil:
R:
Input module
Output module
75 to 125 V AC (Output module)
75 to 250 V AC (Output module)
3 to 60 V DC (Output module)
4 to 32 V DC (Input module)
DC output
Input module
AC output Random
AC output Zero-cross
Standard polarity
Reverse polarity (Only for output module)
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-C
ASCTB214E 201201-T1
2. Output module
Standard packing: Carton: 50 pcs.; Case: 500 pcs.
Note: Reverse polarity type (AQC5∗∗ and AQC6∗∗) is also produced by lot after receipt of order.
RATING
1. Rating [Ambient temperature: 20°C 68°F; Input voltage ripple (output module) and output voltage ripple (input module): 1% or less]
1) Input module
2) Output module
(1) AC output type
(2) DC output type
Notes: *1. Refer to REFERENCE DATA “3. Input current vs. input voltage characteristics”.
*2. Refer to REFERENCE DATA “1. Load current vs. ambient temperature”.
*3. Refer to REFERENCE DATA “2. Non-repetitive surge current vs. carrying time”.
*4. When the load current is less than the rated minimum load current, please refer to “Cautions for Use of SSR”.
Type Load voltage Input voltage Part No.
AC output Zero-cross
75 to 125 V AC
5 V DC AQC1A1 - ZT5 V DC
12 V DC AQC1A1 - ZT12 V DC
24 V DC AQC1A1 - ZT24 V DC
75 to 250 V AC
5 V DC AQC1A2 - ZT5 V DC
12 V DC AQC1A2 - ZT12 V DC
24 V DC AQC1A2 - ZT24 V DC
AC output Random
75 to 125 V AC
5 V DC AQC1A1 - T 5 V DC
12 V DC AQC1A1 - T 12 V DC
24 V DC AQC1A1 - T 24 V DC
75 to 250 V AC
5 V DC AQC1A2 - T 5 V DC
12 V DC AQC1A2 - T 12 V DC
24 V DC AQC1A2 - T 24 V DC
DC output 3 to 60 V DC
5 V DC AQC1AD1- 5 V DC
12 V DC AQC1AD1- 12 V DC
24 V DC AQC1AD1- 24 V DC
Type
Item
AC input DC input Remarks
AQCD3-IM 100/240 V AC AQCD3-IM 4/24 V DC
Input side
Input voltage 80 to 250 V AC 3 to 32 V DC
Input current Max. 5 mA Max. 5 mA
Pick-up voltage Max. 80 V AC Max. 3 V DC
Drop-out voltage Min. 10 V AC Min. 1 V DC
Output side
Load voltage 4 to 32 V DC 4 to 32 V DC
Load current 0.1 to 25 mA 0.1 to 25 mA
Max. “OFF-state” leakage current Max. 5µAMax. 5µA When 32 V DC applied
Max. “ON-state” voltage drop Max. 1.6 V Max. 1.6 V at max. carrying current
Type
Item
AQC1A1-
ZT5VDC
AQC1A1-
T5VDC
AQC1A1-
ZT12VDC
AQC1A1-
T12VDC
AQC1A1-
ZT24VDC
AQC1A1-
T24VDC
AQC1A2-
ZT5VDC
AQC1A2-
T5VDC
AQC1A2-
ZT12VDC
AQC1A2-
T12VDC
AQC1A2-
ZT24VDC
AQC1A2-
T24VDC
Remarks
Input
side
Input voltage
(5 V type)
4 to 6
V DC
(12 V type)
9.6 to 14.4
V DC
(24 V type)
21.6 to 26.4
V DC
(5 V type)
4 to 6
V DC
(12 V type)
9.6 to 14.4
V DC
(24 V type)
21.6 to 26.4
V DC *1
Input impedance (Approx.) 0.3 kΩ0.8 kΩ1.8 kΩ0.3 kΩ0.8 kΩ1.8 kΩ
Drop-out voltage, min 0.5 V 1.2 V 2.4 V 0.5 V 1.2 V 2.4 V
Load
side
Max. load current 1 A*2Ta = Max. 40°C 104°F
Load voltage 75 to 125 V AC 75 to 250 V AC
Non-repetitive surge current 20 A*3In one cycle at 60 Hz
Max. “OFF-state” leakage current 0.6 m A (When 100 V AC applied) 1.1 m A (When 200 V AC applied) at 60 Hz
Max. “ON-state” voltage drop 1.6 V at max. carrying current
Min. load current 10 mA*420 mA*4
Type
Item AQC1AD1-5VDC AQC1AD1-12VDC AQC1AD1-24VDC Remarks
Input
side
Input voltage (5 V type)
4 to 6 V DC
(12 V type)
9.6 to 14.4 V DC
(24 V type)
21.6 to 26.4 V DC *1
Input impedance (Approx.) 0.43 kΩ1.2 kΩ2.8 kΩ
Drop-out voltage, min 0.8 V
Load
side
Max. load current 1 A*2Ta = Max. 40°C 104°F
Load voltage 3 to 60 V DC
Non-repetitive surge current 1.5 A*3at 1s
Max. “OFF-state” leakage current 0.1 m A (When 60 V DC applied)
Max. “ON-state” voltage drop 1.6 V at max. carrying current
Min. load current 1 mA*4
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-C
ASCTB214E 201201-T1
2. Characteristics
[Ambient temperature: 20°C 68°F; Input voltage ripple (output module) and output voltage ripple (input module): 1% or less]
1) Input module
2) Output module
REFERENCE DATA
Type
Item AC Input module DC Input module Remarks
Operate time, max. 20 ms 0.5 ms Input voltage: 24 V DC or 100V AC
Output voltage: 24 V DC
Output current: 25mA
Release time, max 20 ms 0.5 ms
Insulation resistance, min. 109 Ω between input and output at 500 V DC
Breakdown voltage 2,500 Vrms between input and output For 1 minute
Vibration
resistance
Destructive 10 to 55Hz double amplitude of 3 mm 1 hour for X,Y, Z, axis
Functional 10 to 55Hz double amplitude of 3 mm 10 minutes for X,Y, Z, axis
Shock
resistance
Destructive Min. 980 m/s2 {100 G} 5 time each for X,Y,Z axis
Functional Min. 980 m/s2 {100 G} 4 time each for X,Y,Z axis
Ambient temperature –30°C to +80°C –22°F to +176°F
Storage temperature –30°C to +100°C –22°F to +212°F
Type
Item
AC output DC output Remarks
Random Zero-cross
Operate time, max. 1 ms 1/2 cycle of voltage sine wave + 1ms 0.5 ms
Release time, max. 1/2 cycle of voltage sine wave + 1ms 1 ms
Insulation resistance, min. 109Ω between input and output at 500 V DC
Breakdown voltage 2,500 Vrms between input and output For 1 minute
Vibration
resistance
Destructive 10 to 55Hz double amplitude of 3 mm 1 hour for X,Y, Z, axis
Functional 10 to 55Hz double amplitude of 3 mm 10 minutes for X,Y, Z, axis
Shock
resistance
Destructive Min. 980 m/s2 {100 G} 5 time each for X,Y,Z axis
Functional Min. 980 m/s2 {100 G} 4 time each for X,Y,Z axis
Ambient temperature –30°C to +80°C –22°F to +176°F
Storage temperature –30°C to +100°C –22°F to +212°F
Operational method Random Turn-ON,
Zero-cross (Turn-OFF) Zero-cross (Turn-ON and Turn-OFF) —
1. Load current vs. ambient temperature
characteristics
(AC/DC output)
Use load current within range specified in the figure
below
2.-(1) Non-repetitive surge current vs. carrying
time characteristics
(AC output)
2.-(2) Non-repetitive surge current vs. carrying
time characteristics
(DC output)
–30 0 20 40 60 80
0
Ambient temperature, °C
Load current, A
0.2
0.4
0.6
0.8
1.0
1234571020 304050 70100
No. of cycles at 60 Hz
Non-repetitive surge current, A
0
10
20
30
10 20 30 4050 70 100 200 300 1,000
Carrying time, ms
Non-repetitive surge current, A
0
1
2
3
4
5
3. Input current vs. input voltage characteristics
(AC/DC output)
4.-(1) Input current vs. input voltage
characteristics
(AC input)
4.-(2) Input current vs. input voltage
characteristics
(DC input)
30
25
20
15
10
5
0
Input voltage, V
Input current, mA
0102030
AC output
DC output
(5 V type) (12 V type) (24 V type)
Input voltage, V AC
Input current, mA
0
10
8
6
4
2
100 200 300
Input voltage, V DC
Input current, mA
0
10
9
8
7
6
5
4
3
2
1
5101520253035
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-C
ASCTB214E 201201-T1
DIMENSIONS (mm inch)
5. Load current vs. ambient temperature
characteristics for adjacent mounting
(AC/DC output)
=12.7 mm
=20.32 mm
–30 0 20 40 60 80
0
Ambient temperature, °C
Load current, A
0.2
0.4
0.6
0.8
1.0
=Adjacent mounting pitch
.500 inch
.800 inch
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
1. Input module (AC, DC)
External dimensions
General tolerance: ±0.5 ±.020
10
2.7
.106
0.3 0.3
0.3
0.3 0.3
0.8
0.8
12.5
3.9
2.7
5.5
0.4 0.4
20
10.16 7.62
7.62
AC input
Case color: Yellow Case color: White
1
r
58
5
8
r
1
Output: DC –
Output: DC +
Input: AC
Input: AC
…
…
…
…
DC input
5
8
r
1
Output: DC –
Output: DC +
Input: DC +
Input: DC –
…
…
…
…
.394
.012 .012
.012
.012 .012
.031
.031
.492
.154
.106
.217
.016 .016
.787
.400 .300
.300
PC board pattern (Copper-side view)
Tolerance: ±0.1 ±.004
Schematic
7.62
7.6210.16
4-1.1 dia.
4-.043 dia.
Terminal 1
Terminal 5
Terminal 8
Terminal 16
.300
.300.400
16
1
Input power
source
Specified polarities for
DC types are shown in
the parentheses.
Load power
source
58
+
(+)
(–)
–
Load
CAD Data
2. Output module (AC, DC)
External dimensions
General tolerance: ±0.5 ±.020
10
2.7
.106
0.3 0.3
0.3
0.3 0.3
0.8
0.8
12.5
3.9
2.7
5.5
0.4 0.4
20
10.16 7.62
7.62
AC output
Case color: Black Case color: Red
1
r
58
5
8
r
1
Output: AC
Output: AC
Input: DC +
Input: DC –
…
…
…
…
DC output
5
8
r
1
Output: DC –
Output: DC +
Input: DC +
Input: DC –
…
…
…
…
.394
.012 .012
.012
.012 .012
.031
.031
.492
.154
.106
.217
.016 .016
.787
.400 .300
.300
PC board pattern (Copper-side view)
Tolerance: ±0.1 ±.004
Schematic
7.62
7.6210.16
4-1.1 dia.
4-.043 dia.
Terminal 1
Terminal 5
Terminal 8
Terminal 16
.300
.300.400
16
1
Load power source
Specified polarities for
DC types are shown in
the parentheses.
Input power
source
58
(+) (–)
+
–
Load
CAD Data
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-C
ASCTB214E 201201-T1
ACCESSORY
NOTES
For Cautions for Use.
Socket
PC1A-PS
When used for the load less than rated
In the case of the load current less than
rated, malfunction may result from the
residual voltage across the both ends of
the load even if the solid state relay is
turned off.
Use a dummy resistor as a
countermeasure.
The total of the current through the
resistor and the load current must exceed
the min. rated load current.
In case the dummy resistor is not used,
keep in mind that the residual voltage
becomes as follows:
Example:
For the inductive load by the 5 mA load
current and the 200 V AC load voltage,
the load impedance becomes 40 kΩ and
Ve/V = 16% is estimated from the below
graph.
Accordingly, the 32 V voltage remains
across the both ends of the load when
the solid state relay is turned off.
• Characteristics of residual voltage
vs. load impedance (AC output)
161
Load power source
Input power source
5
8
+–
Load
R0(Dummy resistor)
(+)
(–)
020 40
20
40
60
100,%
80
100
60 80 100
Ve
Ve
V
V
SSR
1
2
Load
×
f = 60 Hz
Ve: Residual voltage
V: Power voltage
Power factor: 1
(resistive load)
Power factor: 0.4
(inductive load)
Load impedance, kΩ
