1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Voltage range: 50 – 630 VDC
• Capacitance range: 0.001 – 4.7 µF
• Lead Spacing: 7.5 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56
• Operatingtemperaturerangeof−55°Cto+105°C
• RoHS compliance and lead (Pb)-free terminations
• Tape & Reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive grade (AEC–Q200)
Overview
TheR66isconstructedofmetallizedpolyesterlm(wound
or stacked technology) with radial leads of tinned wire.
Radial leads are electrically welded to the contact metal
layer on the ends of the capacitor winding. The capacitor is
encapsulated with thermosetting resin in a box of material
meeting the UL 94 V–0 requirements.
Automotive grade devices meet the demanding Automotive
ElectronicsCouncil'sAEC–Q200qualicationrequirements.
Applications
Typical applications include blocking, coupling, decoupling,
bypassing, and interference suppression in low voltage
applications such as automotive. Not suitable for across-
the-line application (see Suppressor Capacitors).
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC
(Automotive Grade)
Part Number System
R66 E D 3100 AA 7A J
Series
Rated Voltage
(VDC)
Length (mm)
Capacitance
Code (pF)
Packaging Internal Use
Capacitance
Tolerance
Metallized
Polyester
C = 50
D = 63
E = 100
I = 250
M = 400
P = 630
D = 7.5 The last three
digits represent
signicantgures.
Firstdigitspecies
the number of zeros
to be added.
See Ordering
Options Table
10
6A
7A
J = ±5%
K = ±10%
M = ±20%
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging LL Lead Length
(mm)
Lead and
Packaging
Code
7.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
AA
Ammo Pack
H0=18.5 ±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Standard Reel Ø 355 mm)
H0 = 18.5 ±0.5
CK
Bulk (Bag) – Short Leads
2.7+0.5/−0
JA
Bulk (Bag) – Short Leads
3.5+0.5/−0
JB
Bulk (Bag) – Short Leads
10 ±1
JC
Bulk (Bag) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Bag) – Long Leads
17+1/−2
Z3
Dimensions – Millimeters
p
d
L B
H
LL
Loose Taped
H0
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
7.5
±0.4
3.0
+0.1
0.5
±0.05
7.5
±0.4
4.0
+0.1
0.6
±0.05
7.5
±0.4
5.0
+0.1
0.6
±0.05
7.5
±0.4
6.0
+0.1
0.6
±0.05
Note: See Ordering Options Table for lead length (LL/H
0
) options.
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Performance Characteristics
Dielectric Polyesterlm(polyethyleneterephthalate)
Plates Metal layer deposited by evaporation under vacuum
Winding Non-inductive type
Leads Tinned wire
Protection
Plasticcase,thermosettingresinlled.Boxmaterialissolventresistantandameretardantaccordingto
UL94
Related Documents IEC 60384–2
Rated Voltage VR (VDC) 50 63 100 250 400 630
Rated Voltage VR (VAC) 30 40 63 160 200 220
Capacitance Range (µF) 0.68 – 4.7 0.33 – 3.3 0.068 – 1.5 0.022 – 0.33 0.0068 – 0.15 0.001 – 0.047
Capacitance Values E6series(IEC60063)measuredat1kHzand+20±1°C
Capacitance Tolerance ±5%, ±10%, ±20%
Operating Temperature
Range
−55°Cto+105°CUpperoperatingtemperatureof+125°Cisallowedforamaximumoperatingtimeof
1,000 hours. (Stacked technology only)
Rated Temperature TR+85°C
Voltage Derating Above+85°CDCandACvoltagederatingis1.25%/°C
Climatic Category 55/105/56 IEC 60068–1
Storage Conditions
Storagetime:≤24monthsfromthedatemarkedonthelabelpackage
Averagerelativehumidityperyear≤70%
RH≤85%for30daysrandomlydistributedthroughouttheyear
Dew is absent
Temperature:−40to80°C(see"MaximumHumidityinStorageConditions"graphbelow)
Test Voltage 1.6 x VRVDCfor2seconds(betweenterminations)at+25°C±5°C
Capacitance Drift
Maximum3%aftera2yearstorageperiodatatemperatureof+10°Cto+40°Candarelativehumidityof40%
to 60%
Reliability
(Reference MIL-HDBK-217)
Operational life > 200,000 hours
Failurerate≤2FIT,T=+40°C,V=0.5xVR
Failure criteria: open or short circuit, capacitance change > 10%, DF 2 times the catalog limits,
IR < 0.005 x initial limit
Maximum Pulse Steepness dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp <VR),thespecieddv/dt
can be multiplied by the factor V
R
/Vpp
TemperatureCoecient +400(±200)ppm/°Cat1kHz
Self Inductance
(Lead Length ~ 2 mm) Approximately 8 nH. Maximum 1nH per 1 mm lead and capacitor length.
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Performance Characteristics cont.
* typical value
−40 −20 0
0
10
20
30
40
50
60
70
80
90
100
20
Temperature (°C)
Maximum Humidity in Storage Conditions
Relative Humidity (%)
40 60 80
30 Days
Annual Average
Qualication
Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regardingtestmethodsandconditionsarereferencedindocumentAEC–Q200,StressTestQualicationforPassive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
DissipationFactortanδ
MaximumValuesat25°C±5°C
Frequency For all Capacitance Values
1 kHz 1.00%
10 kHz 1.50%
Insulation Resistance
Measuredat+25°C±5°C,accordingtoIEC60384–2
Minimum Values Between Terminals
Voltage Charge/Time C≤0.33μF C>0.33μF
50 VDC for V
R
≤100VDC
1 minute
≥3,750MΩ
(≥50,000MΩ)*
≥1,250MΩ•µF
(≥5,000MΩ•µF)*
100 VDC for V
R
> 100 VDC
1 minute
≥30,000MΩ
(≥50,000MΩ)*
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C)
1
10
100
1,000
0.1 1 10 100
f [kHz]
V
rms
[V]
63 VDC/40 VAC
0.33 µF p = 7.5
0.68 µF p = 7.5
1.5 µF p = 7.5
3.3 µF p = 7.5
0.1 1 10 100
f [kHz]
100 VDC/63 VAC
1
10
100
1,000
V
rms
[V]
0.1 µF p = 7.5
0.22 µF p = 7.5
0.47 µF p = 7.5
1 µF p = 7.5
250 VDC/160 VAC
630 VDC/220 VAC
400 VDC/200 VAC
1
10
100
1,000
V
rms
[V]
1
10
100
1,000
V
rms
[V]
1
10
100
1,000
V
rms
[V]
0.1 1 10 100
0.1 1 10 100
f [kHz]
f [kHz]
0.1 1 10 100
f [kHz]
0.033 µF p = 7.5
0.068 µF p = 7.5
0.15 µF p = 7.5
0.33 µF p = 7.5
0.001 µF p = 7.5
0.01 µF p = 7.5
0.022 µF p = 7.5
0.047 µF p = 7.5
0.01 µF p = 7.5
0.022 µF p = 7.5
0.047 µF p = 7.5
0.15 µF p = 7.5
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C)
63 VDC/40 VAC 100 VDC/63 VAC
400 VDC/200 VAC250 VDC/160 VAC
630 VDC/220 VAC
0.01
0.1
1
10
l
rms
[A]
0.01
0.1
1
10
l
rms
[A]
0.01
0.1
1
10
l
rms
[A]
0.01
0.1
1
10
l
rms
[A]
0.1 1 10 100
0.1
1 10 100
f [kHz] f [kHz]
1 10 100100
f [kHz]
0.1 1 10
f [kHz]
1000.1 1 10
f [kHz]
0.33 µF p = 7.5
0.68 µF p = 7.5
1.5 µF p = 7.5
3.3 µF p = 7.5
0.1 µF p = 7.5
0.22 µF p = 7.5
0.47 µF p = 7.5
1 µF p = 7.5
0.01 µF p = 7.5
0.022 µF p = 7.5
0.047 µF p = 7.5
0.15 µF p = 7.5
0.033 µF p = 7.5
0.068 µF p = 7.5
0.15 µF p = 7.5
0.33 µF p = 7.5
0.001 µF p = 7.5
0.01 µF p = 7.5
0.022 µF p = 7.5
0.047 µF p = 7.5
0.01
0.1
1
10
l
rms
[A]
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Environmental Test Data
Damp Heat, Steady
State Test
Test Conditions: Performances
Temperature:
Relative humidity (RH):
Test duration:
+40°C±2°C
93% ±2%
56 days
|ΔC/C|≤5%,
Δtanδ≤0.005at1kHz
IRaftertest≥50%ofinitiallimit
Endurance Test Test Conditions Performances
Temperature:
Voltage applied:
Test duration:
+105°C±2°C
1.25 x VC
2,000 hours
|ΔC/C|≤5%,
Δtanδ≤0.005at10kHzforC≤1µF
Δtanδ≤0.003at1kHzforC>1µF
IRaftertest≥50%ofinitiallimit
Resistance to Soldering
Heat Test
Test Conditions Performances
Solder bath temperature:
Dipping time
(with heat screen):
260°C±5°C
10 seconds ±1 second
|ΔC/C|≤2%,
Δtanδ≤0.005at10kHzforC≤1µF
Δtanδ≤0.003at1kHzforC>1µF
IRaftertest≥initiallimit
Environmental Compliance
All KEMET MKT capacitors are RoHS compliant.
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
VDC VAC Capacitance
Value (µF)
Dimensions in mm Lead
Spacing
dV/dt
(V/µs)
Maximum K0
(V2/µs)
KEMET Internal
Part Number
Customer
Part Number
B H L
50 30 0.68 3.0 8.0 10.0 7.5 100 10000 66CD3680(1)6A(2) R66CD3680(1)6A(2)
50 30 1.0 3.0 8.0 10.0 7.5 100 10000 66CD4100(1)6A(2) R66CD4100(1)6A(2)
50 30 1.5 4.0 9.0 10.0 7.5 100 10000 66CD4150(1)6A(2) R66CD4150(1)6A(2)
50 30 2.2 5.0 10.5 10.0 7.5 100 10000 66CD4220(1)6A(2) R66CD4220(1)6A(2)
50 30 4.7 6.0 12.0 10.5 7.5 100 10000 66CD4470(1)6A(2) R66CD4470(1)6A(2)
63 40 0.33 3.0 8.0 10.0 7.5 120 15120 66DD3330(1)7A(2) R66DD3330(1)7A(2)
63 40 0.47 3.0 8.0 10.0 7.5 120 15120 66DD3470(1)6A(2) R66DD3470(1)6A(2)
63 40 0.68 4.0 9.0 10.0 7.5 120 15120 66DD3680(1)7A(2) R66DD3680(1)7A(2)
63 40 1.0 4.0 9.0 10.0 7.5 120 15120 66DD4100(1)7A(2) R66DD4100(1)7A(2)
63 40 1.5 5.0 10.5 10.0 7.5 120 15120 66DD4150(1)7A(2) R66DD4150(1)7A(2)
63 40 2.2 6.0 12.0 10.5 7.5 120 15120 66DD4220(1)6A(2) R66DD4220(1)6A(2)
63 40 3.3 6.0 12.0 10.5 7.5 120 15120 66DD4330(1)6A(2) R66DD4330(1)6A(2)
100 63 0.068 3.0 8.0 10.0 7.5 150 30000 66ED2680(1)7A(2) R66ED2680(1)7A(2)
100 63 0.10 3.0 8.0 10.0 7.5 150 30000 66ED3100(1)7A(2) R66ED3100(1)7A(2)
100 63 0.15 3.0 8.0 10.0 7.5 150 30000 66ED3150(1)7A(2) R66ED3150(1)7A(2)
100 63 0.22 3.0 8.0 10.0 7.5 150 30000 66ED3220(1)7A(2) R66ED3220(1)7A(2)
100 63 0.33 4.0 9.0 10.0 7.5 150 30000 66ED3330(1)7A(2) R66ED3330(1)7A(2)
100 63 0.47 4.0 9.0 10.0 7.5 150 30000 66ED3470(1)7A(2) R66ED3470(1)7A(2)
100 63 0.68 4.0 9.0 10.0 7.5 150 30000 66ED3680(1)7A(2) R66ED3680(1)7A(2)
100 63 1.0 5.0 10.5 10.0 7.5 150 30000 66ED4100(1)7A(2) R66ED4100(1)7A(2)
100 63 1.5 6.0 12.0 10.5 7.5 150 30000 66ED4150(1)6A(2) R66ED4150(1)6A(2)
250 160 0.022 3.0 8.0 10.0 7.5 200 100000 66ID2220(1)7A(2) R66ID2220(1)7A(2)
250 160 0.033 3.0 8.0 10.0 7.5 200 100000 66ID2330(1)7A(2) R66ID2330(1)7A(2)
250 160 0.047 3.0 8.0 10.0 7.5 200 100000 66ID2470(1)7A(2) R66ID2470(1)7A(2)
250 160 0.068 3.0 8.0 10.0 7.5 200 100000 66ID2680(1)6A(2) R66ID2680(1)6A(2)
250 160 0.10 4.0 9.0 10.0 7.5 200 100000 66ID3100(1)7A(2) R66ID3100(1)7A(2)
250 160 0.15 4.0 9.0 10.0 7.5 200 100000 66ID3150(1)7A(2) R66ID3150(1)7A(2)
250 160 0.22 5.0 10.5 10.0 7.5 200 100000 66ID3220(1)7A(2) R66ID3220(1)7A(2)
250 160 0.33 6.0 12.0 10.5 7.5 200 100000 66ID3330(1)6A(2) R66ID3330(1)6A(2)
400 200 0.0068 3.0 8.0 10.0 7.5 275 220000 66MD1680(1)7A(2) R66MD1680(1)7A(2)
400 200 0.010 3.0 8.0 10.0 7.5 275 220000 66MD2100(1)7A(2) R66MD2100(1)7A(2)
400 200 0.015 3.0 8.0 10.0 7.5 275 220000 66MD2150(1)7A(2) R66MD2150(1)7A(2)
400 200 0.022 3.0 8.0 10.0 7.5 275 220000 66MD2220(1)6A(2) R66MD2220(1)6A(2)
400 200 0.033 4.0 9.0 10.0 7.5 275 220000 66MD2330(1)7A(2) R66MD2330(1)7A(2)
400 200 0.047 4.0 9.0 10.0 7.5 275 220000 66MD2470(1)7A(2) R66MD2470(1)7A(2)
400 200 0.068 5.0 10.5 10.0 7.5 275 220000 66MD2680(1)7A(2) R66MD2680(1)7A(2)
400 200 0.10 6.0 12.0 10.5 7.5 275 220000 66MD3100(1)6A(2) R66MD3100(1)6A(2)
400 200 0.15 6.0 12.0 10.5 7.5 275 220000 66MD3150(1)6A(2) R66MD3150(1)6A(2)
630 220 0.0010 3.0 8.0 10.0 7.5 40 50400 66PD1100(1)10(2) R66PD1100(1)10(2)
630 220 0.0015 3.0 8.0 10.0 7.5 40 50400 66PD1150(1)10(2) R66PD1150(1)10(2)
630 220 0.0022 3.0 8.0 10.0 7.5 40 50400 66PD1220(1)10(2) R66PD1220(1)10(2)
630 220 0.0033 3.0 8.0 10.0 7.5 40 50400 66PD1330(1)10(2) R66PD1330(1)10(2)
630 220 0.0047 3.0 8.0 10.0 7.5 40 50400 66PD1470(1)10(2) R66PD1470(1)10(2)
630 220 0.0068 4.0 9.0 10.0 7.5 40 50400 66PD1680(1)10(2) R66PD1680(1)10(2)
630 220 0.010 4.0 9.0 10.0 7.5 300 378000 66PD2100(1)7A(2) R66PD2100(1)7A(2)
630 220 0.015 4.0 9.0 10.0 7.5 300 378000 66PD2150(1)7A(2) R66PD2150(1)7A(2)
630 220 0.022 5.0 10.5 10.0 7.5 300 378000 66PD2220(1)7A(2) R66PD2220(1)7A(2)
630 220 0.033 6.0 12.0 10.5 7.5 300 378000 66PD2330(1)6A(2) R66PD2330(1)6A(2)
630 220 0.047 6.0 12.0 10.5 7.5 300 378000 66PD2470(1)6A(2) R66PD2470(1)6A(2)
VDC VAC Capacitance
Value (µF) B (mm) H
(mm) L (mm) Lead
Spacing
dV/dt (V/
µs)
Max K0
(V2/µs)
KEMET Internal
Part Number
Customer
Part Number
Table 1 – Ratings & Part Number Reference
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
Bold denotes wound capacitor technology
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
Thishasincreasedtheliquidustemperaturefromthatof183°CforSnPbeutecticalloyto217–221°Cforthenewalloys.Asa
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures.Polypropylenecapacitorsareespeciallysensitivetoheat(themeltingpointofpolypropyleneis160–170°C).
Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 to 15
mm),andgreatcarehastobetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.Please
consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2, serves as a solid
guideline for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum)withthe
soldering duration not to exceed more than 3
seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering Time (seconds)
Soldering Iron Bit Temperature (°C)
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/second
ca 3.5°C/second typical
ca 5°C/second
Cooling
2 +3 seconds maximum
115 °C max
T
preheat
∆T < 150°C
100 °C
Preheating
Typical
First Wave
Second Wave
260°C
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Soldering Process cont.
Wave Soldering Recommendations cont.
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1.
Dielectric
Film Material
Maximum
Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 270°C 270°C
Polypropylene 110°C 130°C 260°C 270°C
Paper 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene Sulphide 160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering,andgreatcaremustbetakensothatthepartsarenotoverheated.
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Marking
FRONT TOP
Capacitance
Tolerance
Capacitance Rated
Voltage
Packaging Quantities
Lead Spacing
Thickness
(mm) Height (mm) Length (mm)
Bulk
Short Leads
Bulk
Long Leads
Standard Reel
355 mm
Ammo
Taped
7.5
3.0
8.0
10.0
1,500
1,750
2,100
2,800
4.0
9.0
10.0
2,000
1,500
1,500
2,100
5.0
10.5
10.0
1,500
1,000
1,200
1,600
6.0
12.0
10.5
1,000
800
1,000
1,350
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
PP
H0
F
P2
P1
P0D0
W0
W1W
BA
t
t
W2
Ød
∆h∆h
Figure 1 — Lead Spacing 5 & 7.5 mm Figure 2 — Lead Spacing 7.5 mm
W0
W2
t
Ød
∆h∆h
W1W
FP0D0
P
H0
P1
A−Bt
A−B
A B
Description Symbol
Dimensions (mm)
Lead Spacing
Tolerance
5
7.5
7.5
Figure 1 Figure 1 Figure 2
Lead wire diameter d 0.5 – 0.6 0.5 – 0.6 0.5 – 0.6 ±0.05
Taping lead space P12.7 12.7 12.7 ±1
Feed hole lead space P
0
12.7 12.7 12.7 ±0.2*
Centering of the lead wire P
1
3.85 2.6 3.75 ±0.7
Centering of the body P
2
6.35 6.35 ±1.3
Lead spacing F 5 7.5 7.5 +0.6/−0.1
Component alignment Δh 0 0 0 ±2
Height of component from tape
center H0** 18.5 18.5 18.5 ±0.5
Carrier tape width W18 18 18 +1/−0.5
Hold down tape width W
0
6 6 6 Minimum
Hole position W
1
9 9 9 ±0.5
Hold down tape position W
2
3 3 3 Maximum
Feed hole diameter D
0
4 4 4 ±0.2
Tape thickness t0.7 0.7 0.7 ±0.2
*Maximum 1 mm on 20 lead spaces.
**H0 = 16.5 mm is available upon request.
For orders of capacitors with lead space = 7.5 mm, please specify the
requested version (Figure 1 or Figure 2).
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Ammo Specications
Dimensions in mm
H W T
360* 340 59
* Lower dimension available upon request (maximum 295 mm)
H
T
W
Reel Specications
Dimensions in mm
D H W
355 30 55 maximum
D
W
H
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.