BAT15... Silicon Schottky Diodes * Low barrier type for DBS mixer applications up to 12 GHz, phase detectors and modulators * Low noise figure * Pb-free (RoHS compliant) package BAT15-02EL BAT15-02ELS BAT15-03W BAT15-04W BAT15-05W ! , BAT15-099 " ! , , " ! , , BAT15-099R , , , ! , " , ! ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT15-02EL BAT15-02ELS BAT15-03W BAT15-04W BAT15-05W BAT15-099 BAT15-099R Package TSLP-2-19 TSSLP-2-3 SOD323 SOT323 SOT323 SOT143 SOT143 Configuration single, leadless single, leadless single series common cathode anti-parallel pair cross-over ring 1 LS(nH) 0.4 0.2 1.8 1.4 1.4 2 2 Marking NN S underline white P S8s S5s S5s S6s 2015-01-27 BAT15... Maximum Ratings at TA = 25 C, unless otherwise specified Parameter Symbol Diode reverse voltage VR 4 Forward current IF 110 Total power dissipation Ptot Value BAT15-02ELS, TS 73 C 100 BAT15-02EL, TS 76 C 100 BAT15-03W, TS 70 C 100 BAT15-04W, TS 68 C 100 BAT15-05W, TS 65 C 100 BAT15-099, TS 48 C 100 BAT15-099R, TS 67 C 100 150 Junction temperature Tj Operating temperature range Top -55 ... 150 Storage temperature Tstg -55 ... 150 Unit V mA C Thermal Resistance Parameter Symbol Junction - soldering point1) RthJS Value BAT15-02ELS 770 BAT15-02EL 780 BAT15-03W 795 BAT15-04W 820 BAT15-05W 850 BAT15-099 1020 BAT15-099R 830 Unit 1For calculation of R thJA please refer to Application Note AN077 (Thermal Resistance Calculation) 2 2015-01-27 BAT15... Electrical Characteristics at TA = 25 C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. V(BR) 4 - - V IR - - 5 A DC Characteristics Breakdown voltage I(BR) = 100 A Reverse current VR = 1 V Forward voltage V VF IF = 1 mA 0.16 0.23 0.32 IF = 10 mA 0.25 0.32 0.41 - - 20 Forward voltage matching1) VF mV IF = 10 mA AC Characteristics Diode capacitance pF CT VR = 0 V, f = 1 MHz, BAT15-02ELS - - 0.23 VR = 0 V, f = 1 MHz, BAT15-099R - - 0.5 VR = 0 V, f = 1 MHz, all others types - - 0.35 - 5.5 - Differential forward resistance RF IF = 10 mA / 50 mA 1V F is the difference between lowest and highest VF in a multiple diode component. 3 2015-01-27 BAT15... Diode capacitance CT = (VR ) Reverse current IR = (VR ) TA = Parameter f = 1MHz EHD07082 0.5 CT R pF EHD07081 3 10 A T A =125 C 0.4 10 2 10 1 85 C 0.3 25 C 0.2 10 0 0.1 0.0 10 0 2 V -1 0 4 1 2 3 Forward current IF = (VF) Forward current IF = (TS ) TA = Parameter BAT15-02EL EHD07077 120 mA mA 100 10 1 90 TA = -40 C 25 C 85 C 125 C 10 80 IF F BAT 15-099R 4 VR VR 10 2 V 0 70 60 50 40 10 -1 30 20 10 10 -2 0.0 0.5 0 0 V 1.0 15 30 45 60 75 90 105 120 C 150 TS VF 4 2015-01-27 BAT15... Forward current IF = (TS ) Forward current IF = (TS ) BAT15-02ELS BAT15-03W 120 120 mA 100 100 90 90 80 80 IF IF mA 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 15 30 45 60 75 90 105 120 C 0 0 150 15 30 45 60 75 90 105 120 C TS Forward current IF = (TS ) Forward current IF = (TS ) BAT15-04W BAT15-05W 120 120 mA mA 100 100 90 90 80 80 IF IF 150 TS 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 15 30 45 60 75 90 105 120 C 0 0 150 TS 15 30 45 60 75 90 105 120 C 150 TS 5 2015-01-27 BAT15... Forward current IF = (TS ) Forward current IF = (TS ) BAT15-099 BAT15-099R 120 120 mA 100 100 90 90 80 80 IF IF mA 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 15 30 45 60 75 90 105 120 C 0 0 150 15 30 45 60 90 105 120 C 75 TS 150 TS Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT15-02EL IFmax / IFDC = (t p) BAT15-02EL 10 3 10 1 RthJS 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 2 10 1 -7 10 IFmax/IFDC K/W 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 6 2015-01-27 BAT15... Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT15-03W IFmax / IFDC = (t p) BAT15-03W 10 3 10 1 RthJS IFmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 10 -5 10 -4 10 -3 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT15-04W IFmax / IFDC = (t p) BAT15-04W 10 3 10 1 RthJS IFmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 10 -5 10 -4 10 -3 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 7 2015-01-27 BAT15... Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT15-05W IFmax / IFDC = (t p) BAT15-05W 10 3 10 1 RthJS IFmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 10 -5 10 -4 10 -3 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT15-099 IFmax / IFDC = (t p) BAT15-099 10 3 10 1 RthJS IFmax/IFDC K/W 10 10 1 -6 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 2 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 8 2015-01-27 BAT15... Permissible Puls Load RthJS = (t p) Permissible Pulse Load BAT15-099R IFmax / IFDC = (t p) BAT15-099R 10 3 10 1 RthJS IFmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 9 2015-01-27 BAT15... S11-Parameters for BAT15-099 Typical impedance characteristics (with external bias I and Zo = 50) f I = 0.02 mA I = 0.05 mA I = 0.1 mA I = 0.2 mA I = 0.5 mA GHz MAG ANG MAG ANG MAG ANG MAG ANG MAG ANG 1 0.94 -16.4 0.84 -16.6 0.77 -16.4 0.59 -17.2 0.19 -16.7 2 0.93 -33.8 0.88 -33.8 0.77 -34.5 0.58 -35.2 0.15 -36.1 3 0.92 -53.8 0.86 -54.5 0.75 -54.1 0.58 -56.1 0.13 -64.8 4 0.91 -74.3 0.84 -75.3 0.72 -76.4 0.51 -78.4 0.11 -104.8 5 0.91 -96.6 0.84 -97.6 0.72 -99.1 0.53 -102.3 0.15 -135.7 6 0.91 -115.4 0.84 -116.7 0.73 -118.7 0.53 -122.9 0.18 -160.9 7 0.91 -131 0.84 -132.3 0.73 -134.1 0.54 -138.1 0.2 -168.8 8 0.91 -143 0.84 -144.5 0.73 -146.8 0.55 -150.5 0.81 179.4 9 0.91 -155.6 0.83 -150.2 0.71 -159.7 0.53 -163.9 0.18 179.4 10 0.9 -167.3 0.83 -169.7 0.71 -178.8 0.51 -175.8 0.14 151.2 11 0.89 175.5 0.8 172.6 0.7 170 0.45 164.9 0.09 105.5 12 0.88 175.5 0.76 146.5 0.62 142.8 0.39 134.2 0.14 43.6 S11 = (f, I) BAT15-099 + j 50 + j 100 + j 25 0.02 mA 12 Hz 0.05 mA + j 10 0.1 mA + j 250 0.2 mA f 0.5 mA 10 0 25 50 100 250 1 GHz - j 250 - j10 8 GHz - j 100 - j 25 5 GHz - j50 EHD07083 10 2015-01-27 Package SOD323 11 BAT15... 2015-01-27 Package SOT143 12 BAT15... 2015-01-27 Package SOT323 BAT15... Package Outline 0.9 0.1 2 0.2 0.3 +0.1 -0.05 0.1 MAX. 3x 0.1 M 0.1 A 1 2 1.25 0.1 0.1 MIN. 2.1 0.1 3 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 0.8 1.6 0.6 0.65 0.65 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BCR108W Type code Pin 1 Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 13 2015-01-27 Package TSLP-2-19 14 BAT15... 2015-01-27 Package TSSLP-2-3 15 BAT15... 2015-01-27 BAT15... Edition 2009-11-16 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (<www.infineon.com>). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 16 2015-01-27