SMPS Capacitors (RH Style) RH - Surface Mount `J' Lead Range 0.047 F to 47.0 F Low ESR/ESL 25V to 500 VDC X7R Dielectric -55C to +125C This range of uncoated MLC capacitors are processed for input and output filter capacitors in high frequency DC-DC convertor applications above 10 Watts e.g. telecomms and instrumentation, where high volume and low cost is required. These products are available in surface mount `J' leaded versions and can be supplied in bulk and tape/reel packaging. ELECTRICAL SPECIFICATIONS Typical ESR (m) 3 F, 100V X7R Temperature Coefficient CECC 30 000, (4.24.1) X7R: C Temperature Characteristic - 15%, -55C to +125C Capacitance Test Measured at 1 VRMS max at 1KHz ESR @ 100KHz 17 ESR @ 500KHz 12 ESR @ 1MHz 14 DIMENSIONS Dissipation Factor 25C 2.5% max at 1KHz, 1 VRMS max Style L max RH21 7.62 (0.300) 5.40 (0.213) 4.60 (0.181) 2.50 (0.098) RH22 7.62 (0.300) 5.40 (0.213) 7.50 (0.295) 2.50 (0.098) RH31 7.62 (0.300) 7.00 (0.270) 5.08 (0.200) 5.08 (0.200) Life Test (1000 hrs) CECC 30 000 (4.23) 200% rated voltage at +125C. (500 Volt units @ 120% rated voltage) RH32 7.62 (0.300) 7.00 (0.270) 8.13 (0.320) 5.08 (0.200) RH41 9.20 (0.362) 8.70 (0.342) 4.90 (0.192) 5.08 (0.200) Thermal Shock IEC 68.2.14 -55C to +125C, 5 cycles RH42 9.20 (0.362) 8.70 (0.342) 8.20 (0.323) 5.08 (0.200) RH51 10.7 (0.421) 10.7 (0.421) 4.90 (0.192) 7.62 (0.300) RH52 10.7 (0.421) 10.7 (0.421) 8.20 (0.323) 7.62 (0.300) RH61 14.9 (0.586) 13.6 (0.535) 4.90 (0.192) 10.2 (0.400) RH62 14.9 (0.586) 13.6 (0.535) 8.20 (0.323) 10.2 (0.400) Insulation Resistance 25C 100K megohms or 1000 megohms-F, whichever is less Dielectric Withstanding Voltage 25C (Flash Test) 250% rated voltage for 5 seconds with 50 mA max charging current. (500 Volt units @ 150% rated voltage) Resistance to Solder Heat IEC 68.2.20 W max millimeters (inches) H max S 0.1 (0.004) h No. of leads per side 1.50 0.30 (0.059 0.012) 1.50 0.30 (0.059 0.012) 1.78 0.25 (0.070 0.010) 1.78 0.25 (0.070 0.010) 1.60 0.10 (0.062 0.004) 1.60 0.10 (0.062 0.004) 1.60 0.10 (0.062 0.004) 1.60 0.10 (0.062 0.004) 1.60 0.10 (0.062 0.004) 1.60 0.10 (0.062 0.004) 2 2 3 3 3 3 4 4 5 5 DIMENSIONS millimeters (inches) L Max. W Max. 0.6 (0.024) 0.1 (0.004) M1 M1 = M2 0.5 (0.020) H Max. h M2 0.25 (0.010)Typ. 2.54 (0.100) 0.05 (0.002) Non-Accum. Bend Radius 90 5 46 1.4 (0.055) Typ. 1.65 (0.065) 0.15 (0.006) S SMPS Capacitors (RH Style) RH - Surface Mount `J' Lead Range X7R STABLE DIELECTRIC RH21/RH22 Style Cap F 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.78 0.82 1 1.2 1.5 1.8 2.2 2.7 3 3.3 3.9 4.4 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 25 50 100 200 RH31/RH32 Style 500 50 100 RH41/RH42 Style Voltage DC 200 500 50 100 RH51/RH52 Style 200 500 50 100 200 RH61/RH62 Style 500 50 100 200 500 RH31 RH41 RH32 RH31 RH42 RH51 RH41 RH32 RH52 RH42 RH31 RH62 RH31 RH61 RH52 RH41 RH32 RH21 RH61 RH51 RH41 RH51 RH21 RH62 RH32 RH42 RH51 RH42 RH52 RH22 RH61 RH52 RH61 RH62 RH21 RH22 RH62 RH22 For availability of further parts in the RH21/RH22 Series, contact manufacturing. PACKAGING Style RH21 RH22 RH31 RH32 RH41 RH42 RH51 RH52 RH61 RH62 Qty/Reel 13" 800 500 800 500 800 see note 750 see note 500 see note Max. Qty/Waffle Pack 270 270 108 108 108 100 88 88 42 42 Note: T&R is not yet available. Contact manufacturing for further information as this will be available in the future. HOW TO ORDER RH 31 5 C 225 M Style Size Voltage Dielectric Capacitance Capacitance Code Code Code Code Code Tolerance (see table above) 3 = 25V C = X7R (2 significant K = 10% 5 = 50V 1 = 100V 2 = 200V 7 = 500V digits + no. of zeros) eg. 105 = 1 F 104 = 0.1 F M = 20% A 3 0 Specification Code Package Code Lead Dia. Code A = Non customized 3 = Waffle Pack A = Tape & Reel A 3 Lead Space Lead Style Code Code 0 = Standard A = Standard R = RoHS Compliant 3 = `J' Lead 47