10 For additional product information, visit www.bussmann.com
Terminal Blocks:
Single & Double Row
EuroMag Series
Terminal Blocks:
Panel & Rail Mount
Power Distribution
Blocks
Wire Management
Products
Edge Connectors,
One-Sided Boards
Compliance
References
C
0.70
(17.8)
0.60
(15.2)
0.02
(0.5)
0.375
(9.53)
Mount End Barrier End
Mount End Barrier End
B Pole Centers
A Mount Centers
0.19
(4.8)
Ø
0.32
(8.1)
C
A Mount Centers
0.65
(16.5)
B Pole Centers
0.375
(9.53)
Mount End Barrier End
Mount End Barrier End
0.40
(10.2)
0.76 (19.3)
0.565 (14.35)
on LP2000
0.15
(3.8)
Ø
0.02
(0.5)
MOUNTING BARRIER & BARRIER
ENDS MOUNTING ENDS
ONLY ENDS ONLY
A C B C
Poles Mount Ctrs. Length Pole Ctrs. Length
02 1.13 1.56 0.38 0.81
03 1.50 1.93 0.75 1.18
04 1.88 2.30 1.13 1.56
05 2.25 2.68 1.50 1.93
06 2.63 3.06 1.88 2.31
07 3.00 3.43 2.25 2.68
08 3.38 3.81 2.63 3.06
09 3.75 4.18 3.00 3.43
10 4.13 4.56 3.38 3.81
11 4.50 4.93 3.75 4.18
12 4.88 5.31 4.13 4.56
13 5.25 5.69 4.50 4.93
14 5.63 6.06 4.88 5.31
15 6.00 6.43 5.25 5.68
16 6.38 6.81 5.63 6.06
17 6.75 7.18 6.00 6.43
18 7.13 7.56 6.38 6.81
19 7.50 7.93 6.75 7.18
20 7.88 8.31 7.13 7.56
21 8.25 8.68 7.50 7.93
22 8.63 9.06 7.88 8.31
23 9.00 9.43 8.25 8.68
24 9.38 9.81 8.63 9.06
25 9.75 10.18 9.00 9.43
26 10.13 10.56 9.38 9.81
27 10.50 10.93 9.75 10.18
28 10.88 11.31 10.13 10.55
29 11.25 11.68 10.50 10.93
30 11.63 12.05 10.88 11.31
31 – – 11.25 11.68
32 – – 11.63 12.05
Series A2000, LP2000 & CB2000
Single Row Terminal Blocks
SPECIFICATIONS
Rating: A2: 30A, 300V*
LP2: 30A, 150V*
CB2: 30A, 300V*
Center Spacing: 0.375” or 3/8” (9.52mm)
Wire Range: #12-22 AWG Cu
Screw Size: #6-32 zinc-plated philslot
Torque Rating: 9 lb-in.
Base: Standoffs standard for easy flux washing
Distance Between Barriers: 0.32” (8.1mm)
Recommended PCB Hole Diameter: 0.076” (1.93mm)
Operating Temperature: 105°C (221°F) max., -40°C (-40°F) min.
Molded Material: Black, UL Rated 94V0 Thermoplastic
Breakdown Voltage: 3400V (A2 & LP2); 4100V (CB2).
Agency Information: UL File E62622, CSA File 47235;
IEC Compliance; CE Certified
*30A Rating achieved with a #10 copper wire crimped to a ring terminal.;
20A Rating without ring terminal.
LP202110
A2000 & LP2000 Series
Dimensions - in (mm)
* Dimensions in inches. To convert to millimeters, multiply by 25.4.
A20110807WR
CB2000 Series
CB20210507
Terminal Blocks - Single Row
11
For additional product information, visit www.bussmann.com
Terminal Blocks:
Single & Double Row EuroMag Series Terminal Blocks:
Panel & Rail Mount
Power Distribution
Blocks
Wire Management
Products
Edge Connectors,
One-Sided Boards
Compliance
References
Terminal Blocks - Single Row
Series A2000 & LP2000
Single Row Terminal Blocks
Part Numbering System
Series Terminal Style Base/End Poles Screw Options Options
n
nn
n
n
nn
nn
n
n
nn
n
n
n
n
nn
n
n
nn
nn
nn
n
n
nn
nn
n
A2
- standard barrier
01*
- handwired
1
- std. base/mnt. end
02
to
32
Blank
- std. screw
AB*
- angle mnt. options (pg 13)
LP2
- low profile
02
- printed circuit
2
-
std. base/barrier end
02
to
30
on mount
00
- screws shipped bulk
A1
to
A9
- 0.250˝ QC
barrier
03
- non feed-thru
3
-
insulator base/mnt. end
end base
03*
- stainless steel
B1
to
B9
- 0.187˝ QC
04
- wire wrap tail
4
- insulator base/
04
- brass nickel-plated
DR*
- drilled right angle (pg 13)
06
- handwired barrier end
07
- steel SEMS
L1
to
L6
marking options (pg 27)
07
- extended pin
5
- closed base/ (not available
MP*
mounting plates (pg 13)
08
- printed circuit mount end with hardware options)
RC*
- retaining clips (pg 13)
09
- 0.250˝ QC short
6
- closed base/
09*
- brass SEMS
R30
to
R77
- right angle bends (pg 13)
10
- 0.187˝ QC molded mount end
nickel-plated
S1*
- solder lug/flat
14
- printed circuit (not available with
JA***
,
JB***
&
JC***
- barrier jumpers
19
- 0.250˝ QC long
hardware options
)
OJ2***
&
OJ4***
- over barrier jumpers
CA**
- captive screw (not available w/covers)
WR
- wire ready
(not available on LP2
Covers
- (pg 28)
series)
0.20
(5.1)
0.062
(1.57)
0.031
(0.79)
0.55
(14.0)
0.062
(1.57)
0.031
(0.79)
01
Handwired
04
Wire Wrap Tail
03
Non Feed-Thru
02
Printed Circuit
0.54
(13.7)
0.055
(1.40)
0.032
(0.81)
0.14
(3.6)
07
Extended Pin
0.11
(2.79)
0.031
(0.79)
0.30
(7.6)
06
Handwired
Terminal Styles Inches (Millimeters)
0.062
(1.57)
0.17
(4.3)
0.031
(0.79)
0.42
(10.7)
0.187
(4.75)
0.031
(0.79)
0.40
(10.2)
0.250
(6.35)
0.031
(0.79)
08
Printed Circuit
10
0.187˝ QC
09
0.250˝ QC short
0.72
(18.3)
0.31
(7.9)
0.30
(7.62)
0.33
(8.4)
0.250
(6.35)
0.031
(0.79)
19
0.250˝ QC long
0.062
(1.57)
0.031
(0.79) 0.125
(3.2)
14
Printed Circuit
A 2
L P 2
Base/End Note: 6
style not available with
covers. 5 & 6 Styles
only available with 03
terminals.
0.55
(14.0)
0.110
(2.79)
0.031
(0.79)
*A2 only.
**Not compatible with 03-stainless steel screws.
***Contact factory for configuration.
12 For additional product information, visit www.bussmann.com
Terminal Blocks:
Single & Double Row
EuroMag Series
Terminal Blocks:
Panel & Rail Mount
Power Distribution
Blocks
Wire Management
Products
Edge Connectors,
One-Sided Boards
Compliance
References
Hardware Options (Bulk ordering part numbers are in parentheses) Inches (Millimeters)
Solder Lugs Jumpers Quick Connects
Blade Width A = 0.250” Blade Width B = 0.187”
0.68 (17.3)
0.84 (21.2)
S1
(2S1-J)
A1 &B1
(2A1-J &2B1-J)
A2 &B2
(2A2-J &2B2-J)
A3 &B3
(2A3-J &2B3-J)
A9 &B9
(2A9-J &2B9-J)
0.33 (8.4)
†JB
(JB2-02-J) A4 &B4
(2A4-J &2B4-J)
A5 &B5
(2A5-J &2B5-J) A6 &B6
(2A6-J &2B6-J)
A7 &B7
(2A7-J &2B7-J)
A8 &B8
(2A8-J &2B8-J)
0.33 (8.4)
†JA
(JA2-02-J)
0.33 (8.4)
†JC
(JC2-02-J)
WR
Wire Ready
04
Brass
Nickel-Plated
(F506-J)
07
Steel SEMS
(F523-J)
Screw Options (Bulk ordering part numbers are in parentheses)
09
Brass SEMS
Nickel-Plated
(F524-J)
†OJ4
(OJ4-J)
†OJ2
(OJ2-J)
B
SECTION A–A
0.40
(10.2)
B
0.180 (4.57)
0.218 (5.54)
B
0.150 Ø (3.8)
mounting holes (2)
0.095
(2.4)
SECTION B–B
0.40
(10.2)
B
6
Molded Mount End
1, 3 & 5
Mount End
03
Stainless Steel
(F507-J)
Standard
Zinc-plated Steel
(F505-J)
Base/End Options Inches (Millimeters)
Series A2000 & LP2000
Single Row Terminal Blocks Continued
†Contact factory for configuration.
Terminal Blocks - Single Row
Mount End Details
1 - Standard base/mount end
5 - Closed base/mount end 6 - Closed base/molded mount end
2 - Standard base/barrier end
4 - Insulator base/barrier end
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
FIG 6
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
FIG 6
3 - Insulator base/mount end
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
FIG 6
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
FIG 6
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
FIG 6
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
FIG 6
0.30
(7.62)
0.30
(7.62)
13
For additional product information, visit www.bussmann.com
Terminal Blocks:
Single & Double Row EuroMag Series Terminal Blocks:
Panel & Rail Mount
Power Distribution
Blocks
Wire Management
Products
Edge Connectors,
One-Sided Boards
Compliance
References
MOUNTING
PLATE MP
MT
0.144 HOLE
w/0.312 C' BORE
0.325
0.12
Option
MP Metal inserts with 0.150” dia. hole
accept #6 screw. Bulk part number 2MP-J.
Option DR
Counterbored holes across mount ends of
block enable fastening with two screws at
right angles to normal mount position.
Drilled Right Angle (A2, LP2 only)
Mounting Plates Retaining Clip
RETAINING CLIP
Option RC
Use on standoff tubes. Fit panels up to
0.125” thick. Two clips for every five
positions. Supplied unassembled. Bulk part
number H541-J.
Mounting Options
0.32
0.45
0.15
0.25
0.04
Option AB
Angle brackets enable block to be fastened
at right angles to normal mount position.
Bulk part number 2AB-J.
Angle Brackets (A2, LP2 only)
Right Angle Bends (A2, LP2 only)
Right angle terminals are offered on the A2000 & LP2000 Series. Configurations
are defined in these dimensions: X = pin extension beyond the block base; Z
= length from block base to centerline of the terminal tip. Standard bends
consist of the X and Z dimensions shown in the chart. Specify by adding the
selected Bend Option Code to the terminal part number.
X
Z
0.82
X
Z
0.55
07 Terminal Bend Configurations
04 Terminal Bend Configurations
Bend Available
Option X Z w/insulator
Code (minimum) base
R30 0.04 0.28 No
R35 0.01 0.23 No
R36 0.02 0.22 No
R39 0.05 0.19 No
R42 0.08 0.16 No
R46 0.12 0.12 No
R48 0.14 0.10 No
R50 0.16 0.08 No
Bend Available
Option X Z w/insulator
Code (minimum) base
R30 0.04 0.55 Yes
R35 0.01 0.50 Yes
R36 0.02 0.49 Yes
R42 0.08 0.43 Yes
R46 0.12 0.39 Yes
R50 0.16 0.35 No
R53 0.19 0.32 No
R66 0.32 0.19 No
R69 0.35 0.16 No
R75 0.41 0.10 No
R77 0.43 0.08 No
Dimensions in inches. To convert to millimeters, multiply by 25.4.
Series A2000 & LP2000
Single Row Terminal Blocks Continued
Terminal Blocks - Single Row
14 For additional product information, visit www.bussmann.com
Terminal Blocks:
Single & Double Row
EuroMag Series
Terminal Blocks:
Panel & Rail Mount
Power Distribution
Blocks
Wire Management
Products
Edge Connectors,
One-Sided Boards
Compliance
References
0.19
(4.8 )
0.045
(1.14)
0.031
(0.79)
0.18
(4.6)
02
Printed Circuit
Series Terminal Style Base/End Poles Screws Options
n
nn
nn
n
n
nn
n
n
n
n
nn
n
n
nn
nn
nn
n
n
nn
nn
n
CB2
- closed back
01
- handwired
1
- mount end
02
to
32
07
- steel SEMS
AB**
- angle mounting brackets (pg 15)
02
- printed circuit
2
- barrier end
02
to
30
on mount standard
A7
to
A9
- 0.250” QC
07
- extended pin end base
09
- brass SEMS
B7
to
B9
- 0.187” QC
14
- printed circuit nickel-plated
EB
- exit back terminals
CA
- captive screw
EF
- exit front terminals
07CA
- SEMS captive
L1
to
L6
marking options (pg 27)
LT1
to
LT6
marking options (pg 27)
MP
mtg. plates (pg 15)
S1
- solder lug/flat
JA***
,
JB***
&
JC***
- barrier jumpers
OJ2***
&
OJ4***
- over barrier jumpers
Covers
- (pg 28)
0.40
(10.2)
0.120
(3.05)
0.031
(0.79)
0.18
(4.6)
07
Steel SEMS
zinc-plated
(B001-7084-J)
0.125
(3.18)
0.045
(1.14)
0.031
(0.79)
0.18
(4.6)
14
Printed Circuit
0.70
(17.8)
0.062
(1.57)
0.031
(0.79)
0.18
(4.6)
07
Extended Pin
Screw Options (Bulk ordering part numbers are in parentheses)
Terminal Styles Inches (Millimeters)
Series CB2000
Single Row Terminal Blocks
Part Numbering System
01
Handwired
Exit Rear (std.) EF Exit Front EB Exit Back
CB2 T
erminal Exit Options Inches (Millimeters)
0.18
(4.6)
0.255
(6.48)
0.18
(4.6) X
CB2
09
Brass SEMS
nickel-plated
(F524-J)
* NOTE: Wire ready screws standard on all terminal styles.
**Only available on 3-poles and up.
***Contact factory for configuration..
Terminal Blocks - Single Row
15
For additional product information, visit www.bussmann.com
Terminal Blocks:
Single & Double Row EuroMag Series Terminal Blocks:
Panel & Rail Mount
Power Distribution
Blocks
Wire Management
Products
Edge Connectors,
One-Sided Boards
Compliance
References
Terminal Blocks - Single Row
MOUNTING
PLATE
MP
MT
MT8
Hardware Options (Bulk ordering part numbers are in parentheses) Inches (Millimeters)
Solder Lugs Jumpers Quick Connects
Blade Width A = 0.250”. Blade Width B = 0.187”.
0.68 (17.3)
0.84 (21.2)
S1
(2S1-J)
A9 &B9
(2A9-J &2B9-J)
0.33 (8.4)
†JB
(JB2-XX-J)
A7 &B7
(2A7-J &2B7-J)
A8 &B8
(2A8-J &2B8-J)
0.33 (8.4)
†JA
(JA2-XX-J)
0.33 (8.4)
†JC
(JC2-XX-J)
Mounting Options Inches (Millimeters)
Snap-in Angle Bracket Chassis
or PCB
A
A
#6 or #8
mounting
screw & nut
(Customer
supplied.)
0.71
(18.0)
0.45
(11.4)
0.79
(20.1)
1.02
(25.8)
0.24
(6.1)
0.42
(10.7)
Option AB
†OJ4
(OJ4-J)
†OJ2
(OJ2-J)
Option MP
MP Metal inserts with 0.150” dia. hole accept #6 screw.
Bulk part number 2MP-J.
Mounting Plates
End Positions
usable
Exit Back (EB)
Terminals
Angle
Bracket
Right Angle Mounting Bracket
Mounts blocks on PC boards at a right angle.
• Protects solder joints.
• Recommended for all EB (Exit Back) PCB terminal blocks.
• Bracket snaps securely on block (no hardware required).
• Minimum strip length (end positions are usable).
• Mount with #6-32 or #8-32 screws (not supplied).
Series CB2000
Single Row Terminal Blocks
†Contact factory for configuration..
