.156" ELC Screw-Terminal/Edgecard Connector
View part PDF File
Download part DXF File View part PDF File
Download part DXF File
The compact .156" ELC wire-to-board edgecard
terminal block is designed for panel-mounting with
bottom wire entry. Connectors are available in single
and double-sided configurations to meet specific
application needs.
Superior Contact Design
The ELC features a bifurcated cantilever beam
contact that eliminates the board damage possible
with the stamped tuning fork board contacts
commonly used in similar connectors. The cantilever
beam also assures improved performance under
board warping and bending conditions over the full
.054" to .070" board thickness range.
Connectors are available with special marking and
configuration adaptations, and in sizes not indicated in
the table. Please contact Amphenol Pcd for details.
SPECIFICATIONS:
Current Rating: 5A
Insulation Resistance: >105 Megohms
Durability: 500 cycles per MIL-C-21097
Wire Range: 14-26 AWG
Wire Pullout Force: 35 lbs minimum
Board Thickness Range: .054-.070"
MATERIALS:
Housing: Glass-filled polyester, UL 94-V0, Black
Contact: Phosphor bronze, .000030" selective gold
finish
Wire Clamp: Brass, nickel finish
Terminal Screw: Steel, nickel finish
