B270 - B2100 Green 2.0A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER Features Mechanical Data Schottky Barrier Chip Case: SMB Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Surge Overload Rating to 50A Peak Moisture Sensitivity: Level 1 per J-STD-020 For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 High Temperature Soldering: +260C/10 Second at Terminal Polarity: Cathode Band or Cathode Notch Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Weight: 0.093 grams (Approximate) Top View Bottom View Ordering Information (Note 4) Part Number B2xx-13-F B2xxx-13-F Notes: Case SMB SMB Packaging 3000/Tape & Reel 3000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. Marking Information YWW XXXX B270 - B2100 Document number: DS30021 Rev. 12 - 2 YWW XXXXX XXXX/XXXXX = Product Type Marking Code, ex: B290 (SMB Package) = Manufacturers' Code Marking YWW = Date Code Marking Y = Last Digit of Year (ex: 7 for 2017) WW = Week Code (01 to 53) 1 of 6 www.diodes.com January 2018 (c) Diodes Incorporated B270 - B2100 Maximum Ratings (@TA = +25C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = +125C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO B270 B280 B290 B2100 Unit 70 80 90 100 V 49 56 63 70 2.0 V A 50 A IFSM Thermal Characteristics Characteristic Typical Thermal Resistance Junction to Terminal (Note 5) Operating and Storage Temperature Range Symbol RJT TJ, TSTG Value 15 -65 to +150 Unit C/W C Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Symbol Min Typ Forward Voltage Drop VF -- -- Leakage Current (Note 6) IR -- -- Total Capacitance CT -- -- Unit 7.0 2.0 75 A mA pF V Test Condition IF = 2.0A, TA = +25C IF = 2.0A, TA = +100C @ Rated VR, TA = +25C @ Rated VR, TA = +100C VR = 4V, f = 1MHz 5. Valid provided that terminals are kept at ambient temperature. 6. Short duration pulse test used to minimize self-heating effect. 7. DUT mounted on 1*MRP FR-4 PC board, 2oz. IF, INSTANTANEOUS FORWARD CURRENT (A) Notes: Max 0.79 0.69 10 1.0 TJ = 125C TJ = 100C 0.1 TJ = 25C 0.01 0 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics B270 - B2100 Document number: DS30021 Rev. 12 - 2 2 of 6 www.diodes.com January 2018 (c) Diodes Incorporated B270 - B2100 2.5 IF(AV), AVERAGE FORWARD CURRENT (A) CT, TOTAL CAPACITANCE (pF) 1,000 100 10 0.1 2.0 1.5 1.0 0.5 0 1 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 3 Total Capacitance vs. Reverse Voltage 25 50 75 100 125 TT, TERMINAL TEMPERATURE (C) Fig. 4 Forward Current Derating Curve 150 IFSM, PEAK FORWARD SURGE CURRENT (A) 50 Single Half-Sine-Wave 40 30 20 10 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 5 Max Non-Repetitive Peak Forward Surge Current 1000 Zthja(C/W), TRANSIENT THERMAL RESISTANCE Note 7 D=0.7 D=0.5 D=0.9 100 D=0.3 10 D=0.1 D=0.05 D=Single Pulse D=0.02 1 D=0.01 D=0.005 Duty Cycle, D = t1 / t2 0.1 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, PULSE DURATION TIME (sec) Figure 6. Transient Thermal Resistance B270 - B2100 Document number: DS30021 Rev. 12 - 2 3 of 6 www.diodes.com January 2018 (c) Diodes Incorporated B270 - B2100 Zth-j-l(C/W), TRANSIENT THERMAL RESISTANCE 100 Note 7 D=0.9 D=0.7 10 D=0.5 D=0.3 D=0.1 D=Single Pulse 1 D=0.05 D=0.02 D=0.01 D=0.005 Duty Cycle, D = t1 / t2 0.1 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, PULSE DURATION TIME (sec) Figure 7. Transient Thermal Resistance B270 - B2100 Document number: DS30021 Rev. 12 - 2 4 of 6 www.diodes.com January 2018 (c) Diodes Incorporated B270 - B2100 Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. SMB B A SMB Dim Min Max A 3.30 3.94 B 4.06 4.57 C 1.96 2.21 D 0.15 0.31 E 5.00 5.59 G 0.05 0.20 H 0.76 1.52 J 2.00 2.50 All Dimensions in mm C D J G H E Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SMB X X1 Y G C B270 - B2100 Document number: DS30021 Rev. 12 - 2 5 of 6 www.diodes.com Dimensions Value (in mm) C G X X1 Y 4.30 1.80 2.50 6.80 2.30 January 2018 (c) Diodes Incorporated B270 - B2100 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2018, Diodes Incorporated www.diodes.com B270 - B2100 Document number: DS30021 Rev. 12 - 2 6 of 6 www.diodes.com January 2018 (c) Diodes Incorporated