HUBER+SUHNER®FIBEROPTIC
QUICK ASSEMBLYTM FST/FSC CONNECTORS
Characteristics
– Field termination within 90 seconds
– No set-up time needed
– Low Insertion Loss
– Full ceramic ferrule for highest reliability
– One-Piece Design
– Halogen-free (UL 94-V0 material)
Applications
– Premises cabling and FTTH
– Single- and Multimode
FST connector FSC connector
Assembly procedure Quick AssemblyTM
Locking mechanism Bayonet Push-Pull
Connection Physical contact
Standards IEC 61754-4 IEC 61754-2
EN50173, EIA/TIA 568 A
Strain relief 70N
Operating temperature -25 °C to +70 °C, depending on type of cable
Durability min. 1000 cycles
Insertion Loss IL [dB]1
Singlemode (typ./97%) 0.3/0.5
Multimode (typ./97%) 0.3/0.5
Return Loss [dB]
Singlemode > 26
Multimode > 20
1) Measurement according to IEC 61300-3-4
01.05.0202e/08.03/800
Waiver
While the information contained in this folder has been carefully compiled
to the best of our present knowledge, it is not intended as representation
or warranty of any kind on our part regarding the suitability of the produc-
ts concerned for any particular use or purpose and neither shall any state-
ment contained herein be construed as a recommendation to infringe any
industrial property rights or as a license to use any such rights. The suitabi-
lity of each product for any particular purpose must be checked before-
hand with our specialists.
HUBER+SUHNER AG
Fiber Optics Division
9100 Herisau, Switzerland
Phone +41 (0)71 353 41 11
Fax +41 (0)71 353 46 47
www.hubersuhner.com
Ordering information
Article Type Description / Usage
Connectors for Quick Assembly termination
FSC Simplex Multimode FSC-QXA-B001 FSC connector beige (25 pcs/pack)
FSC Duplex Multimode FSC-QXA-B001-02 FSC connector beige (12 pcs/pack)
FSC Simplex Singlemode FSC-QXA-A001 FSC connector blue (25 pcs/pack)
FSC Duplex Singlemode FSC-QXA-A001-02 FSC connector blue (12 pcs/pack)
FST Multimode FST-QXA-B001 FST connector (25 pcs/pack)
FST Singlemode FST-QXA-A001 FST connector (25 pcs/pack)
Accessories
Clauss stripper 9801.22.C Stripping cable jacket, tube, coating
Aramide scissors 9801.24.C Cutting aramide yarn
Marker 9801.48.C
KFZ power supply adapter QXA-005
Hand microscope 9801.80.G Inspection of end surface of connectors
100 times magnification
Consumables
Singlemode polishing kit QXA-019 NEW Plastic mat for SM polishing process
and 15 polishing films
Powder container replacement QXA-006 Gluing the fiber into the connector
15 polishing films 9801.76.F D1 for SM polishing process
50 polishing films 9801.71.G 3 µm aluminium oxide
50 lapping films 9801.71.H 5 µm silicium carbide
Cleaning tissues 9801.60.E Set with 10 tissues
Fiber container replacement QXA-007
Spare parts
Heating element QXA-008 Pre-heating and curing of connectors
Accumulator QXA-009 Power supply for manipulator
Power supply (230 V) QXA-010
Power supply (115 V) QXA-011
Ceramic cleaver QXA-012
Powder container seal QXA-018
Please find more information on fiber optic connectors in our general catalogue or on www.hubersuhner.com
HUBER+SUHNER is certified
according to ISO 9001 and
ISO 14001.
HUBER+SUHNER - Excellence in Connectivity Solutions
68
