a= 7 PART NO. SHT. 1 a TE & connectivity | CUSTOMER DATA 1432793-1 lor 2 DRAWN APPROVAL DATE FIRST_DRAWN | SCALE CUSTOMER E.SIMPSON | 8 qoeprer | 05-26-05 | 1:1 TYCO_ELECTRONICS_STANDARD TOLERANCE OX = 4+/- | CHANGES UNLESS O.XX = Me REV. DATE co APP. SPECIFIED OXXX = td 040CT2016 ECR-16014229] BT. OTHERWISE ANGLES = +/ DO NOT SCALE THIS DRAWING -4S4{0ci20t6 EcR16-014229) NOT TO BE USED IN AUTOMOTIVE APPLICATIONS OR APPLICATIONS REQUIRING PPAP AND/OR IMDS DOCUMENTATION ELECTRICAL CHARACTERISTICS: (ALL DATA APPLIES @ 23C UNLESS OTHERWISE SPECIFIED) COIL DATA: NOMINAL VOLTAGE: OPERATE VOLTAGE: RELEASE VOLTAGE: COIL RESISTANCE: OPERATE TIME: RELEASE TIME: TEMPERATURE RANGE: CONTACT DATA: 12 VDC 7.8 VDC MAXIMUM 1.2 VDC MINIMUM 90 OHMS +/ 10% 10 mSEC. MAXIMUM EXCLUDING BOUNCE 13 mSEC. MAXIMUM EXCLUDING BOUNCE OPERATING 40C TO +85C (CONTACT DATA IS FORMATTED N.O./N.C.) CONTACT ARRANGEMENT: CONTACT MATERIAL: CONTACT MILLIVOLT DROP: MAXIMUM MAKE CURRENT: MAXIMUM BREAK CURRENT: MAXIMUM CONTINUOUS CURRENT: INITIAL BREAKDOWN CURRENT EXPECTED LIFE: MECHANICAL CHARACTERISTICS: EXPECTED LIFE: TERMINALS 1 FORM C (SPDT) AgSn0 (SILVER TINOXIDE) 200mv @ 35A ON N.O. CONTACTS (AFTER SWITCHING) 250mv @ 20A ON N.C. CONTACTS (AFTER SWITCHING 90A/30A (LAMP) @ 16 VDC 40A/30A 16 VDC RESISTIVE 40A/30A @ 23C , 35A/20A @ 85C SOO0V RMS CONTACTS TO COIL 100,000 OPERATIONS, 40 A, 14 VDC RESISTIVE ON NORMALLY OPEN CONTACT 10 MILLION OPERATIONS, NO CONTACT LOAD COPPER, UNPLATEDa= . PART NO. SHT. 2 se TE connectivity =| CUSTOMER DATA 1432793-1 or 2 DRAWN APPROVAL DATE FIRST_DRAWN | SCALE CUSTOMER E.SIMPSON | 3. TorprER | 05-26-05 1:1 TYCO_ELECTRONICS_ STANDARD TOLERANCE OX = +/- UNLESS O.XX = +/- a REV D SPECIFIED O.XXX = 4/- OTHERWISE ANGLES = +/- DO NOT SCALE THIS DRAWING MILLIMETERS MARKING TO INCLUDE: 15,3 0.25} TYCO ELECTRONICS NAME, TYCO ELECTRONICS PART NUMBER, SCHEMATIC, COIL VOLTAGE, COUNTRY OF ORIGIN, AND DATE CODE 0.8+0.1 { 5,1MAX H 6.60,5 | 26,5MAX > 13.9205 \ 05.3402 { Y { ~ 24,5MAX 11,.5MAX iq { s {| a a 4,640.35 U UJ 5X@1,740,25 5x0,8+0,05 * TERMINAL LOCATIONS 5X6.30.1 APPLY AT THE BASE hk 86(+) OF THE TERMINALS K Aspect |< 26,5MAX > = #1 7,90,25 "8.40.25 te zo {s7/ za ( 85 4 a = 85(-) Schematic Drawing *16,8+0,3 & 5 = O 26,5MAX ( Botton views) = NOT TO BE USED IN AUTOMOTIVE APPLICATIONS OR APPLICATIONS \ \ ) REQUIRING PPAP AND/OR IMDS DOCUMENTATION *8,440,25 Le