Features LED Driver 3W Class II AC-DC LED Power Supply 350mA to 700mA CC/CV Output ENEC, RCM and EAC Certified UL1310/8750, EN61347 Certified Universal Input Voltage Range Fused Input and Protected Output 3kVAC Isolation IP66 Low Cost Description A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6 high power LEDs. The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. Connections are via 215mm long flying leads. Selection Guide Part Number (VDC) CV Mode (mA) (VDC) CC Mode (mA) Efficiency typ. (%) RACD03-350 15 0-350 2.5-15 350 72 RACD03-500 11 0-500 2.5-11 500 71 RACD03-700 6 0-700 2.5-6 700 62 LIGHTLINE AC/DC-Converter with 3 year Warranty 3 Watt Single Output Specifications (typical at 25C and after warm up time unless otherwise specified ) Input Voltage Range 90-264VAC or 120-370VDC Rated Power 3W nom. / 5.5W max. Input Frequency Range 47-63 Hz Output Voltage Range 2.5 - 15VDC max. Inrush Current (<2mS) 230VAC 10A max. Leakage Current 240VAC/50Hz Input Fuse Built-in 0.2mA typ. T1A Input Current Output Current Accuracy RoHS 2011/65/EU 6/6 E340696 UL8750 certified UL1310 certified EN61347 certified IEC/EN61347-2-13 certified IEC/EN62384-1 EAC; ENEC 130mA max. (combined Tolerance, Load Regulation and Line Regulation) Minimum Load Open Circuit Protected 10% 1 LED Output Ripple 0.1Ap-p max. Hold Up Time 18ms min. Operating Frequency 66kHz typ. AC RMS Isolation Voltage I/P to O/P 3.75kV / 1 minute Temperature Coefficient 0.02%/C typ. Overload Protection 120% typ. Short Circuit Protection Continuous Current Limit Output Overvoltage Protection Overtemperature Protection RACD03 Zener Diode Clamp Shutdown, Automatic restart after cooling down Operating Temperature Range Ambient Temperature (free air convection, according to CE/UL) Case Temperature Operating Temperature Range Ambient Temperature (free air convection, according to ENEC) Case Temperature -20C to +50C 75C max. -20C to +40C 75C max. Storage Temperature Range -25C to +85C Humidity 95% RH max. IP Rating IP66 PCB Material Plastic Resin with Fibreglass (UL94V-0) Case Material Plastic Weight 45g continued on next page www.recom-power.com REV: 2/2017 L-19 RACD03 Series LIGHTLINE AC/DC-Converter Specifications (typical at 25C and after warm up time unless otherwise specified ) Packing Quantity Certifications 10pc UL8750, 1st Edition 2009 UL1310, 6th Edition 2011 CSA C22.2 No. 223-M91 EN 61347-1, 2008+A1:2011+A2:2013 AS/NZS 61347.1:2002 + IEC61347-2-13, 1st Edition EN 61347-2-13: 2014 IEC/EN62384, 1st-Edition+A1:2009 TP TC 004/020, 2011 Standard for LED Equipment for use in Lighting Products Standard for Class 2 Power Units Extra Low Voltage Class 2 Outputs Lamp Controlgear General Requirments for Safety (ENEC) Power Supply or Charger for lighting purposes electronic type (RCM) Lamp Controlgear Particular Requirements (ENEC) D.C. or A.C. Controlgears for LED Performance Requirements Safety of Low-Voltage Equipment (EAC) EMC Limits and methods of measurement of radio disturbance characteristics of electrical lighting EN55015:2013, A1:2015 Equipment for general Lighting Purpose EMC Immunity Requirements EN61547:2009 ESD Electrostatic discharge immunity test Air: 8kV; Contact: 4kV IEC61000-4-2: 2008, Criteria B Radiated, radio-frequency, electromagnetic field immunity test 3V/m IEC61000-4-3:2006+A1:2007, Criteria A Voltage Dips and Interruptions Voltage Dips: >95% IEC61000-4-11:2004, Criteria B Voltage Dips: 30% IEC61000-4-11:2004, Criteria C Limits of Harmonic Current Emissions EN61000-3-2:2014 Voltage Fluctuations and Flicker in Public Low-Voltage Systems <=16A per phase EN61000-3-3:2013 Telecommunication Part 18 - Industrial, Scientific and Medical Equipment FCC47 CFR Part 18, Class A Design Lifetime 25C ambient >20 x 10 hours in operation Connections (please refer to Package Style and Pinning") AC Input Live Brown Wire, AWG18, 215mm + 6mm stripped and tinned AC Input Neutral Blue Wire, AWG18, 215mm + 6mm stripped and tinned LED + Red Wire, AWG18, 215mm + 10mm stripped and tinned LED Black Wire, AWG18, 215mm + 10mm stripped and tinned Note: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Constant Current (CC) and Constant Voltage (CV) Graph RACD03-500 CV 11V Maximum Number of LED drivers per circuit breakers RACD03-350 CV 15V Condition Circuit Breaker CC CC Output Voltage RACD03-700 CV 6V Circuit Breaker Current Typ 10A 16A 20A 25A 115VAC, 1Ohm 90 phase angle C 221 247 337 430 230VAC, 1Ohm 90 phase angle B C 80 265 157 317 200 437 254 550 CC 700mA 500mA Output Current 350mA 3V Nominal Current Limits Package Style and Pinning 215 +10 -20 101 SEC 3 4 Wire Connections 2 Mounting screws are included O3.0 PRI 1 2 61 215 Tc = Case Temperature Measuring Point t c +10 -20 4.0 5.0 38.1 FC 46.1 29.6 Wire Function (1) blue VAC in (N) (2) brown VAC in (L) (3) black LED- (4) red LED+ 23.1 Tolerance 1.30.1 RACD03 Characteristics XX = +1mm/ -0.5mm XX.X = +/- 0.25mm 52.1 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. L-20 REV: 2/2017 www.recom-power.com