ILD1615, ILQ1615 Vishay Semiconductors Optocoupler, Phototransistor Output, (Dual, Quad Channel), 110 C Rated Dual Channel FEATURES A 1 8 C C 2 7 E * Operating temperature from - 55 C to + 110 C A 3 6 C * Identical channel to channel footprint C 4 5 E A 1 16 C * Dual and quad packages feature: - Reduced board space - Lower pin and parts count - Better channel to channel CTR match - Improved common mode rejection C 2 15 E A 3 14 C * Isolation test voltage, 5300 VRMS C 4 13 E A 5 12 C * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC C 6 11 E A 7 10 C C 8 9 E Quad Channel AGENCY APPROVALS * UL1577, file no. E52744 system code H, double protection * CSA 93751 * BSI IEC 60950; IEC 60065 i179015-1 * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending DESCRIPTION The ILD1615, ILQ1615 are multi-channel 110 C rated phototransistor optocouplers that use GaAs IRLED emiters and high gain NPN phototransistors. These devices are constructed using over/under leadframe optical coupling and double molded insulation technology resulting a withstand test voltage of 7500 VAC PEAK and a working voltage of 1700 VRMS. The binned min./max. and linear CTR characteristics make these devices well suited for DC or AC voltage detection. Eliminating the phototransistor base connection provides added electrical noise immunity from the transients found in many industrial control environments. Because of guaranteed maximum non-saturated and saturated switching characteristics, the ILD1615, ILQ1615 can be used in medium speed data I/O and control systems. The binned min./max. CTR specification allow easy worst case interface calculations for both level detection and switching applications. Interfacing with a CMOS logic is enhanced by the guaranteed CTR at IF = 1.0 mA. ORDERING INFORMATION I L x 1 6 1 5 - PART NUMBER x = D (Dual) or Q (Quad) AGENCY CERTIFIED/PACKAGE UL, CSA, BSI DIP-8 DIP-16 Document Number: 82582 Rev. 1.7, 24-May-11 DIP-# 4 CTR BIN DUAL CHANNEL 7.62 mm QUAD CHANNEL CTR (%) 160 to 320 ILD1615-4 - For technical questions, contact: optocoupleranswers@vishay.com 160 to 320 ILQ1615-4 www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1615, ILQ1615 Vishay Semiconductors Optocoupler, Phototransistor Output, (Dual, Quad Channel), 110 C Rated ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER INPUT Peak reverse voltage Forward current Surge current Power dissipation Derate linearly from 25 C OUTPUT Collector emitter breakdown voltage Emitter collector breakdown voltage Collector current SYMBOL VALUE UNIT VR IF 6.0 60 1.5 100 1.0 V mA A mW mW/C BVCEO BVECO IC IC Pdiss 70 7.0 50 100 150 1.5 V V mA mA mW mW/C 2.0 mm distance from case bottom Tstg Tamb Tsld t = 1.0 s VISO VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C RIO RIO - 55 to + 150 - 55 to + 110 260 400 5.33 500 6.67 5300 7.0 7.0 1012 1011 C C C mW mW/C mW mW/C VRMS mm mm IFSM Pdiss t < 1.0 ms Power dissipation Derate linearly from 25 C COUPLER Storage temperature Operating temperature Soldering temperature (1) Package power dissipation ILD1615 Derate linearly from 25 C Package power dissipation ILQ1615 Derate linearly from 25 C Isolation test voltage Creepage distance Clearance distance Isolation resistance TEST CONDITION Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to wave profile for soldering conditions for through hole devices. ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION INPUT Forward voltage IF = 10 mA Breakdown voltage IR = 10 A Reverse current VR = 6.0 V Capacitance VR = 0 V, f = 1.0 MHz OUTPUT Collector emitter capacitance VCE = 5.0 V, f = 1.0 MHz Collector emitter leakage current VCE = 10 V Collector emitter breakdown voltage ICE = 0.5 mA Emitter collector breakdown voltage IE = 0.1 mA PACKAGE TRANSFER CHARACTERISTICS Channel/channel CTR match IF = 10 mA, VCE = 5.0 V COUPLER Capacitance (input to output) VIO = 0 V, f = 1.0 MHz Insulation resistance VIO = 500 V, TA = 25 C Channel to channel isolation SYMBOL MIN. TYP. MAX. UNIT VF VBR IR CO 1.0 6.0 1.15 30 0.01 25 1.3 V V A pF CCE ICEO BVCEO BVECO 70 7.0 CTRX/CTRY 1 to 1 CIO RS 6.8 5.0 1012 500 10 100 pF nA V V 2 to 1 0.8 1014 pF VAC Note * Minimum and maximum values are tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. www.vishay.com 2 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 82582 Rev. 1.7, 24-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1615, ILQ1615 Optocoupler, Phototransistor Output, (Dual, Quad Channel), 110 C Rated Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION Current transfer ratio (collector emitter saturated) IF = 1.0 mA, VCE = 0.4 V IF = 10 mA, VCE = 5.0 V Current transfer ratio (collector emitter) IF = 1.0 mA, VCE = 5.0 V PART ILD1615-4 ILQ1615-4 ILD1615-4 ILQ1615-4 ILD1615-4 ILQ1615-4 SYMBOL MIN. CTRCEsat TYP. MAX. 100 CTRCE 160 200 CTRCE 56 90 UNIT % 320 % % SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Turn-on time IF = 10 mA, VCC = 5.0 V, RL = 75 , 50 % of VPP ton 3.0 s Rise time IF = 10 mA, VCC = 5.0 V, RL = 75 , 50 % of VPP tr 2.0 s Turn-off time IF = 10 mA, VCC = 5.0 V, RL = 75 , 50 % of VPP toff 2.3 s Fall time IF = 10 mA, VCC = 5.0 V, RL = 75 , 50 % of VPP tf 2.0 s Propagation H to L IF = 10 mA, VCC = 5.0 V, RL = 75 , 50 % of VPP tPHL 1.1 s Propagation L to H IF = 10 mA, VCC = 5.0 V, RL = 75 , 50 % of VPP tPLH 2.5 s Turn-on time IF = 5.0 mA, VCC = 5.0 V, RL = 1.0 k, VHT = 1.5 V ton 6.0 s Rise time IF = 5.0 mA, VCC = 5.0 V, RL = 1.0 k, VHT = 1.5 V tr 4.6 s Turn-off time IF = 5.0 mA, VCC = 5.0 V, RL = 1.0 k, VHT = 1.5 V toff 25 s Fall time IF = 5.0 mA, VCC = 5.0 V, RL = 1.0 k, VHT = 1.5 V tf 15 s Propagation H to L IF = 5.0 mA, VCC = 5.0 V, RL = 1.0 k, VHT = 1.5 V tPHL 5.4 s Propagation L to H IF = 5.0 mA, VCC = 5.0 V, RL = 1.0 k, VHT = 1.5 V tPLH 7.4 s SATURATED COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Common mode rejection output high VCM = 50 VP-P, RL = 1.0 k, IF = 0 mA CMH 5000 V/s Common mode rejection output low VCM = 50 VP-P, RL = 1.0 k, IF = 10 mA CML 5000 V/s CCM 0.01 pF Common mode coupling capacitance Document Number: 82582 Rev. 1.7, 24-May-11 MIN. For technical questions, contact: optocoupleranswers@vishay.com TYP. MAX. UNIT www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1615, ILQ1615 Optocoupler, Phototransistor Output, (Dual, Quad Channel), 110 C Rated Vishay Semiconductors 400 10 000 350 300 250 Detector 200 150 40 V 1000 ICE0 (nA) Ptot - Power Dissipation (mW) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) LED 100 24 V 12 V 10 100 1 50 0 0 18731 40 20 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 1 - Permissible Power Dissipation vs. Temperature Non-Saturation Operation 0.1 - 75 - 25 18734 25 75 125 Tamb - Ambient Temperature (C) Fig. 4 - Collector to Emitter Dark Current vs. Ambient Temperature 30 - 55 C 1.4 0 C 1.3 1.2 1.1 25 C 1.0 50 C 0.9 10 mA 10 110 C 0.8 5 mA 2 mA 0.7 0.1 1 17596 10 0 0.0 100 IF - Forward Current (mA) 18735 50 45 IF = 30 mA 40 35 30 IF = 20 mA 25 IF = 15 mA 20 I F = 10 mA 15 10 IF = 5 mA 5 IF = 1 mA 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18733 VCE - Collector Emitter Voltage (V) Fig. 3 - Collector Current vs. Collector Emitter Voltage www.vishay.com 4 0.1 0.2 0.3 0.4 1 mA 0.5 0.6 VCE - Collector to Emitter Voltage (V) Fig. 5 - Normalized Current vs. Collector Emitter Saturation Voltage CTRNorm - Normalized Output Current Fig. 2 - Forward Voltage vs. Forward Current I C - Collector Current (mA) 25 mA 20 IC (mA) V F - Forward Voltage (V) 1.5 1.2 IF = 5 mA 1.0 10 mA 0.8 0.6 1 mA 0.4 0.2 Normalized to: IF = 10 mA, Tamb = 25 C, VCE = 0.4 V, saturated 0.0 - 55 - 35 - 15 17597 5 25 45 65 85 105 125 Tamb - Ambient Temperature (C) Fig. 6 - Normalized Current Transfer Ratio vs. Ambient Temperature For technical questions, contact: optocoupleranswers@vishay.com Document Number: 82582 Rev. 1.7, 24-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1615, ILQ1615 CTRNorm - Normalized Output Current Optocoupler, Phototransistor Output, (Dual, Quad Channel), 110 C Rated 1000 1.0 Switching Time (s) 1.2 10 mA 0.8 5 mA 0.6 1 mA 0.4 0.2 Normalized to: Temp = 25 C at IF = 10 mA and VCE = 5V 0.0 - 55 - 35 - 15 18737 25 45 65 85 105 125 Tamb - Ambient Temperature (C) toff 10 ton 0.1 1 10 100 R L - Load Resistance (k) Fig. 10 - Forward Resistance vs. Forward Current 1000 Pulse width = 100 ms I F = 10 mA Duty cycle = 50 % -1 1.0 -2 Switching Time (ms) CTR Norm - Normalized Output Current 100 18340 1.2 0.8 0.6 -3 0.4 -4 Normalized to: IF = 10 mA, Tamb = 25 C, VCE = 0.4, saturated 0.2 0.0 0.1 1 100 trise 10 IF - Forward Current (mA) t fall 1 0.1 100 10 18341 Fig. 8 - Normalized CTR vs. Forward Current CTR Norm - Normalized Output Current Pulse width = 100 ms I F = 10 mA Duty cycle = 50 % 1 5 Fig. 7 - Normalized CTR vs. Temperature 17598 Vishay Semiconductors 1 10 100 R L - Load Resistance (k) Fig. 11 - Forward Resistance vs. Forward Current 1.2 -2 -1 1.0 0.8 -3 0.6 -4 0.4 Normalized to: IF = 10 mA, Tamb = 25 C, VCE = 5 V, non-saturated 0.2 0.0 0.1 17599 1 10 100 IF - Forward Current (mA) Fig. 9 - Normalized CTR vs. Forward Current Document Number: 82582 Rev. 1.7, 24-May-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1615, ILQ1615 Optocoupler, Phototransistor Output, (Dual, Quad Channel), 110 C Rated Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 0.165 ISO method A 9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 3.045 0.255 0.70 0.19 3 to 9 0.51 0.05 2.54 typ. 0.25 0.05 i178006 Pin one ID 8 7 6 5 4 3 2 1 6.48 6.81 9 10 11 12 13 14 15 16 ISO method A 19.77 20.07 0.76 1.14 0.79 7.62 typ. 3.30 3.81 4 0.46 0.56 0.51 0.89 2.54 typ. 10 typ. 3 to 9 1.27 i178007 2.79 3.30 5.84 6.35 0.20 0.30 PACKAGE MARKING www.vishay.com 6 ILD1615 ILQ1615 V YWW H 68 V YWW H 68 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 82582 Rev. 1.7, 24-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: ILD1615-1 ILD1615-1X009T ILD1615-2 ILD1615-2X009T ILD1615-3 ILD1615-3X009T ILD1615-4 ILD16154X009T ILQ1615-1 ILQ1615-1X009T ILQ1615-2 ILQ1615-2X009T ILQ1615-3 ILQ1615-3X009T ILQ1615-4 ILQ1615-4X009T