UNISONIC TECHNOLOGIES CO., LTD LM78XX LINEAR INTEGRATED CIRCUIT 3-TERMINAL 1A POSITIVE VOLTAGE REGULATOR DESCRIPTION The UTC LM78XX family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that required supply current up to 1 A. FEATURES * Output current up to 1A * Fixed output voltage of 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V and 18V available * Thermal overload shutdown protection * Short circuit current limiting * Output transistor SOA protection ORDERING INFORMATION Ordering Number Lead Free Halogen Free LM78XXL-TA3-T LM78XXG-TA3-T LM78XXL-TF3-T LM78XXG-TF3-T LM78XXL-T2Q-T LM78XXG-T2Q-T Note: Pin Assignment: O: Output G: GND I: Input www.unisonic.com.tw Copyright (c) 2013 Unisonic Technologies Co., Ltd Package TO-220 TO-220F TO-262 Pin Assignment 1 2 3 I G O I G O I G O Packing Tube Tube Tube 1 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT MARKING INFORMATION PACKAGE TO-220 TO-220F TO-262 VOLTAGE CODE 05: 06: 07: 08: 09: 10: 12: 15: 18: MARKING 5.0 V 6.0 V 7.0 V 8.0 V 9.0 V 1.0 V 1.2 V 1.5 V 1.8 V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT TEST CIRCUIT APPLICATION CIRCUIT VIN 1 UTC LM78XX 3 VOUT 2 CI=0.33 F CO=0.1 F Note 1: To specify an output voltage, substitute voltage value for "XX". 2: Bypass capacitors are recommended for optimum stability and transient response and should be located as close as possible to the regulators. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS (Operating temperature range applies unless otherwise specified) PARAMETER SYMBOL RATING UNIT Input voltage VIN 35 V Output Current IOUT 1 A Power Dissipation PD Internally Limited W Operating Junction Temperature TOPR -20 ~ +150 C Storage Temperature TSTG -55 ~ +150 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient Junction to Case SYMBOL JA JC RATING 65 5 UNIT C/W C/W ELECTRICAL CHARACTERISTICS (IOUT=0.5A, TJ= 0C~125C, CI =0.33F, CO=0.1F, unless otherwise specified)(Note 1) For UTC LM7805 (VIN =10V) PARAMETER SYMBOL TEST CONDITIONS MIN 4.80 TJ =25C, IOUT=5mA ~ 1.0A Output Voltage VOUT VIN =7.5V ~ 20V, 4.75 IOUT=5mA ~ 1.0A,PD15W Dropout Voltage VD TJ =25C TJ =25C,IOUT=5mA ~ 1.0A Load Regulation VOUT TJ =25C,IOUT=0.25A ~ 0.75A VIN =7V ~ 25V, TJ =25C Line regulation VOUT VIN =7.5V ~ 20V, TJ =25C, IOUT=1.0A Quiescent Current IQ TJ =25C, IOUT1.0A VIN =7.5V ~ 20V Quiescent Current Change IQ IOUT=5mA ~ 1.0A Output Noise Voltage eN 10Hzf100kHz Temperature Coefficient of Vo Vo/T IOUT=5mA Ripple Rejection RR VIN =8V ~ 18V,f=120Hz, TJ =25C 62 Peak Output Current IPEAK TJ =25C Short-Circuit Current ISC VIN =35V, TJ =25C UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 5.0 MAX 5.20 UNIT V 5.25 V 2.0 50 25 50 50 8.0 1.0 0.5 40 -0.6 80 1.8 250 V mV mV mV mV mA mA mA V mV/C dB A mA 4 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For UTC LM7806 (VIN =11V) PARAMETER SYMBOL Output Voltage VOUT Dropout Voltage VD Load Regulation VOUT Line regulation VOUT Quiescent Current IQ IQ Quiescent Current Change Output Noise Voltage Temperature Coefficient of Vo Ripple Rejection Peak Output Current Short-Circuit Current For UTC LM7807 (VIN =13V) PARAMETER eN Vo/T RR IPEAK ISC SYMBOL Output Voltage VOUT Dropout Voltage VD Load Regulation VOUT Line regulation VOUT Quiescent Current IQ IQ Quiescent Current Change Output Noise Voltage Temperature Coefficient of Vo Ripple Rejection Peak Output Current Short-Circuit Current eN Vo/T RR IPEAK ISC TEST CONDITIONS TJ =25C, IOUT=5mA ~ 1.0A VIN =8.5V ~ 21V, IOUT=5mA ~ 1.0A, PD15W TJ =25C TJ =25C,IOUT=5mA ~ 1.0A TJ =25C,IOUT=0.25A~ 0.75A VIN =8V ~ 25V, TJ =25C VIN =8.5V ~ 21V, TJ =25C,IOUT=1.0A TJ =25C, IOUT1.0A VIN =8.5V ~ 21V IOUT=5mA ~ 1.0A 10Hzf100kHz IOUT=5mA VIN =9V ~ 19V,f=120Hz, TJ =25C TJ =25C VIN =35V, TJ =25C TEST CONDITIONS TJ =25C, IOUT=5mA - 1.0A VIN =9.5V ~ 22V, IOUT=5mA ~ 1.0A, PD15W TJ =25C TJ =25C,IOUT=5mA ~ 1.0A TJ =25C,IOUT=0.25A ~ 0.75A VIN =9V ~ 25V, TJ =25C VIN =9.5V ~ 22V, TJ =25C,IOUT=1.0A TJ =25C, IOUT1.0A VIN =9.5V ~ 22V IOUT=5mA ~ 1.0A 10Hzf100kHz IOUT=5mA VIN =10V ~ 20V,f=120Hz, TJ =25C TJ =25C VIN =35V, TJ =25C UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 5.76 TYP 6.0 5.70 MAX 6.24 UNIT V 6.30 V 2.0 60 30 60 60 8.0 1.0 0.5 59 45 -0.7 75 1.8 250 MIN 6.72 TYP 7.0 6.65 MAX 7.28 UNIT V 7.35 V 2.0 70 35 70 70 8.0 1.0 0.5 59 50 -0.8 75 1.7 250 V mV mV mV mV mA mA mA V mV/C dB A mA V mV mV mV mV mA mA mA V mV/C dB A mA 5 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For UTC LM7808 (VIN =14V) PARAMETER SYMBOL Output Voltage VOUT Dropout Voltage VD Load Regulation VOUT Line regulation VOUT Quiescent Current IQ IQ Quiescent Current Change Output Noise Voltage Temperature Coefficient of Vo Ripple Rejection Peak Output Current Short-Circuit Current For UTC LM7809 (VIN =15V) PARAMETER eN Vo/T RR IPEAK ISC SYMBOL Output Voltage VOUT Dropout Voltage VD Load Regulation VOUT Line regulation VOUT Quiescent Current IQ IQ Quiescent Current Change Output Noise Voltage Temperature Coefficient of Vo Ripple Rejection Peak Output Current Short-Circuit Current eN Vo/T RR IPEAK ISC TEST CONDITIONS TJ =25C, IOUT=5mA~ 1.0A VIN =10.5V ~ 23V, IOUT=5mA ~ 1.0A, PD15W TJ =25C TJ =25C,IOUT=5mA ~ 1.0A TJ =25C,IOUT=0.25A ~ 0.75A VIN =10.5V ~ 25V, TJ =25C VIN =10.5V ~ 23V, TJ =25C,IOUT=1.0A TJ =25C, IOUT1.0A VIN =10.5V ~ 23V IOUT=5mA ~ 1.0A 10Hzf100kHz IOUT=5mA VIN =11.5V ~ 21.5V, f=120Hz, TJ =25C TJ =25C VIN =35V, TJ =25C MIN 7.68 TEST CONDITIONS TJ =25C, IOUT=5mA ~ 1.0A VIN =11.5V ~ 24V, IOUT=5mA ~ 1.0A,PD15W TJ =25C TJ =25C,IOUT=5mA ~ 1.0A TJ =25C,IOUT=0.25A ~ 0.75A VIN =11.5V ~ 25 V, TJ =25C VIN =11.5V ~ 24V, TJ =25C, IOUT=1.0A TJ =25C, IOUT1.0A VIN =11.5V ~ 24V IOUT=5mA ~ 1.0A 10Hzf100kHz IOUT=5mA VIN =12.5V ~ 22.5V,f=120Hz, TJ =25C TJ =25C VIN =35V, TJ =25C MIN 8.64 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 8.0 7.60 MAX 8.32 UNIT V 8.40 V 2.0 58 -0.9 V mV mV mV mV mA mA mA V mV/C 72 dB 1.8 250 A mA 80 40 80 80 8.0 1.0 0.5 56 TYP 9.0 8.55 MAX 9.36 UNIT V 9.45 V 2.0 90 45 90 90 8.0 1.0 0.5 56 58 -1.1 72 1.8 250 V mV mV mV mV mA mA mA V mV/C dB A mA 6 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For UTC LM7810 (VIN =16V) PARAMETER SYMBOL Output Voltage VOUT Dropout Voltage VD Load Regulation VOUT Line regulation VOUT Quiescent Current IQ IQ Quiescent Current Change Output Noise Voltage Temperature coefficient of Vo Ripple Rejection Peak Output Current Short-Circuit Current eN Vo/T RR IPEAK ISC For UTC LM7812 (VIN =19V) PARAMETER SYMBOL Output Voltage VOUT Dropout Voltage VD Load Regulation VOUT Line regulation VOUT Quiescent Current IQ IQ Quiescent Current Change Output Noise Voltage Temperature Coefficient of Vo Ripple Rejection Peak Output Current Short-Circuit Current eN Vo/T RR IPEAK ISC TEST CONDITIONS TJ =25C, IOUT=5mA ~ 1.0A VIN =12.5V ~ 25V, IOUT=5mA ~ 1.0A,PD15W TJ =25C TJ =25C,IOUT=5mA - 1.0A TJ =25C,IOUT=0.25A - 0.75A VIN =13V ~ 25V, TJ =25C VIN =13V ~ 25V, TJ =25C,IOUT=1.0A TJ =25C, IOUT1.0A VIN =12.6V ~ 25V IOUT=5mA - 1.0A 10Hzf100kHz IOUT=5mA VIN =13V ~ 23V,f=120Hz, TJ =25C TJ =25C VIN =35V, TJ =25C TYP 10.0 9.50 MAX 10.40 10.50 2.0 100 50 100 100 8.0 1.0 0.5 56 TEST CONDITIONS MIN 11.52 TJ =25C, IOUT=5mA ~ 1.0A VIN =14.5V ~ 27V, 11.40 IOUT=5mA ~ 1.0A,PD15W TJ =25C TJ =25C,IOUT=5mA ~ 1.0A TJ =25C,IOUT=0.25A ~ 0.75A VIN =14.5V ~ 30V, TJ =25C VIN =14.6V ~ 27V, TJ =25C, IOUT=1.0A TJ =25C, IOUT1.0A VIN =14.5V ~ 30V IOUT=5mA ~ 1.0A 10Hzf100kHz IOUT=5mA VIN =15V - 25V,f=120Hz, TJ =25C 55 TJ =25C VIN =35V, TJ =25C UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 9.60 58 -1.1 72 1.8 250 TYP 12.0 V mV mV mV mV mA mA mA V mV/C dB A mA MAX 12.48 UNIT V 12.60 V 2.0 120 60 120 120 8.0 1.0 0.5 75 -1.5 72 1.8 250 UNIT V V V mV mV mV mV mA mA mA V mV/C dB A mA 7 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For UTC LM7815 (VIN =23V) PARAMETER SYMBOL Output Voltage VOUT Dropout Voltage VD Load Regulation VOUT Line regulation VOUT Quiescent Current IQ IQ Quiescent Current Change Output Noise Voltage Temperature Coefficient of Vo Ripple Rejection Peak Output Current Short-Circuit Current eN Vo/T RR IPEAK ISC For UTC LM7818 (VIN =27V) PARAMETER SYMBOL TEST CONDITIONS MIN 14.40 TJ =25C, IOUT=5mA ~ 1.0A VIN =17.5V ~ 30V, 14.25 IOUT=5mA ~ 1.0A,PD15W TJ =25C TJ =25C,IOUT=5mA ~ 1.0A TJ =25C,IOUT=0.25A ~ 0.75A VIN =18.5V ~ 30V, TJ =25C VIN =17.7V ~ 30V, TJ =25C, IOUT =1.0A TJ =25C, IOUT1.0A VIN =17.5V ~ 30V IOUT=5mA ~ 1.0A 10Hzf100kHz IOUT=5mA VIN =18.5V ~ 28.5V,f=120Hz, TJ =25C 54 TJ =25C VIN =35V, TJ =25C TYP 15.0 MAX 15.60 UNIT V 15.75 V 2.0 150 75 150 150 8.0 1.0 0.5 90 -1.8 70 1.8 250 V mV mV mV mV mA mA mA V mV/C dB A mA TEST CONDITIONS MIN TYP MAX UNIT 17.28 18.0 18.72 V TJ =25C, IOUT=5mA ~ 1.0A Output Voltage VOUT VIN =21V ~ 33V, 17.10 18.90 V IOUT=5mA ~ 1.0A, PD15W Dropout Voltage VD TJ =25C 2.0 V TJ =25C,IOUT=5mA ~ 1.0A 180 mV Load Regulation VOUT TJ =25C,IOUT=0.25A ~ 0.75A 90 mV 180 mV VIN =21V ~ 33V, TJ =25C Line regulation VOUT VIN =21V ~ 33V, 180 mV TJ =25C, IOUT =1.0A Quiescent Current IQ TJ =25C, IOUT1.0A 8.0 mA VIN =21.5V ~ 33V 1.0 mA Quiescent Current Change IQ IOUT=5mA ~ 1.0A 0.5 mA Output Noise Voltage eN 10Hzf100kHz 110 V Temperature Coefficient of Vo Vo/T IOUT=5mA -2.2 mV/C Ripple Rejection RR VIN =22V ~ 32V,f=120Hz, TJ =25C 53 69 dB Peak Output Current IPEAK TJ =25C 1.8 A Short-Circuit Current ISC VIN =35V, TJ =25C 250 mA Note 1: The Maximum steady state usable output current are dependent on input voltage, heat sinking, lead length of the package and copper pattern of PCB. The data above represents pulse test conditions with junction temperatures specified at the initiation of test. 2: Power dissipation<0.5W UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT NOTES FOR USE 1. Thermal design Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions. 2. Absolute maximum ratings An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can break down the devices, thus making impossible to identify breaking mode, such as a short circuit or an open circuit. If any over rated values will expect to exceed the absolute maximum ratings, consider adding circuit protection devices, such as fuses. 3. GND voltage The potential of GND pin must be minimum potential in all operating conditions. 4. Actions in strong electromagnetic field Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to malfunction. 5. Inter-pin shorts and mounting errors Use caution when positioning the IC for mounting on printed circuit boards. The IC may be damaged if there is any connection error or if pins are shorted together. 6. Thermal shutdown circuit The IC incorporates a built-in thermal shutdown circuit (TSD circuit). The thermal shutdown circuit (TSD circuit) is designed only to shut the IC off to prevent thermal runaway. It is not designed to protect the IC or guarantee its operation. Do not continue to use the IC after operating this circuit or use the IC in an environment where the operation of this circuit is assumed. 7. Overcurrent Protection Circuit An overcurrent protection circuit is incorporated in order to prevention destruction due to short-time overload currents. Continued use of the protection circuits should be avoided. Please note that the current increases negatively impact the temperature. 8. Testing on application boards When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress. Always discharge capacitors after each process or step. Always turn the IC's power supply off before connecting it to or removing it from a jig or fixture during the inspection process. Ground the IC during assembly steps as an antistatic measure. Use similar precaution when transporting or storing the IC. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 9 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT NOTES FOR USE(Cont.) 9. Ground Wiring Pattern When using both small signal and large current GND patterns, it is recommended to isolate the two ground patterns, placing a single ground point at the ground potential of application so that the pattern wiring resistance and voltage variations caused by large currents do not cause variations in the small signal ground voltage. Be careful not to change the GND wiring pattern of any external components, either. 10. Damage to the internal circuit or element may occur when the polarity of the Vcc pin is opposite to that of the other pins in applications. (I.e. Vcc is shorted with the GND pin while an external capacitor is charged.) Use a maximum capacitance of 1000F for the output pins. Inserting a diode to prevent back-current flow in series with Vcc or bypass diodes between Vcc and each pin is recommended. Bypass Diode Diode for preventing back current flow VCC Output pin Bypass Diode UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10 of 12 QW-R101-006.Q LM78XX Output Voltage, VO (V) Power Dissipation, PD (W) TYPICAL CHARACTERISTICS Output Voltage vs. Input Voltage Output Voltage Change vs. Junction Temperature 200 IO=5mA 150 10 TJ=25 9 8 100 7 50 6 0 5 -50 4 IO=0A IO=0.5A 3 -100 2 -150 IO=1A 1 0 -200 -50 -25 0 25 50 75 100 125 150 Junction Temperature, TJ () 0 2 6 4 8 10 Input Voltage, VIN (V) 12 Dropout Voltage, VD (V) GND-Pin Current, IQ (mA) LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 11 of 12 QW-R101-006.Q LM78XX LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS(Cont.) Output Voltage, VD (V) Dropout Voltage, VD (V) Ripple Rejection, RR (dB) Output Peak Current, IO peak (A) UTC assumes no responsibility for equipm ent failures that result from using products at values that exceed, even mom entarily, rated values (such as m aximum ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or system s where m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation presented in this docum ent does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 12 of 12 QW-R101-006.Q