Real time clock module Epson Toyocom Small size, low profile model package SERIAL-INTERFACE REAL TIME CLOCK MODULE RX - 4574 LC *Built in frequency adjusted 32.768 kHz crystal unit. *Interface Type : 3-wire serial interface *Operating voltage range : 1.6 V to 5.5 V *Wide Timekeeper voltage range : 1.3 V to 5.5 V *Low backup current : 0.35 A / 3 V (Typ.) *32.768 kHz frequency output function : C-MOS output With Control Pin *The various functions include full calendar, alarm, timer. Actual size Block diagram Overview 32.768 kHz OSC CONTROL LINE * 32.768 kHz frequency output function * FOUT pin output (C-MOS output), CL=30 pF * Output frequency is selectable from 1/30 Hz to 32.768 kHz (32 Values) CLOCK and DIVIDER CALENDAR * Timer function FOUT FCON / TIRQ OUTPUT CONTROLLER TIMER INTERRUPTS ALARM CONTROLLER / AIRQ * Timer function which can be set up between 1/4096 second and 255 minutes. * It is recorded automatically to TF-bit at the time of event occurrence, and it's possible to output with /TIRQ pin output (open-drain output). * Selectable one time mode or repeat mode. REGISTER REGISTER * Alarm function * Alarm function can be set to any combination of day of week, hour, or minute. *It is recorded automatically to AF-bit at the time of event occurrence, and it's possible to output with /AIRQ pin output (open-drain output). CONTROL REGISTER BUS CLK INTERFACE CIRCUIT CE 0 SHIFT REGISTER Functions are compatible with RTC-4574 SA / JE / NB. Pin Function Terminal connection / External dimensions Function CE0 Input CE1 Input CLK Input DATA Bi-directional 1. N.C. FOUT Output Input / AIRQ Output The open drain output pin for alarm and time update interrupts. / TIRQ Output The open drain output pin for timer interrupt. VDD - Connected to a positive power supply. GND - Connected to a ground. 3. / TIRQ 4. / AIRQ 5. FCON Power voltage Clock voltage Operating temperature Condition Min. Typ. Max. Unit VDD VCLK - 1.6 1.3 3.0 3.0 5.5 5.5 V V TOPR - -40 +25 +85 C Oscillation Start-up time Symbol f/f tSTA Condition Ta = +25 C VDD = 3.0 V Ta = +25 C VDD = 1.6 V Ta = -40 C to +85 C VDD = 1.6 V 7. GND 2.8 ! Current consumption characteristics Item Symbol ! Frequency characteristics Item 8. CE0 Refer to application manual for details. IBK Frequency tolerance 9. DATA VSOJ - 12pin Specifications (characteristics) Symbol 11. CE1 10. CLK 2.4 6. FOUT ! Recommended Operating Conditions Item 12. VDD 2. N.C. The data input / output pin for serial data transfer. This pin outputs the reference clock signal at 32.768 kHz ( C-MOS output ). High impedance at the time of output off. The input pin for the FOUT output control. FCON (Unit:mm) RX - 4574 LC The chip enabled input pin 0. (Built-in pull-down resistance) When both CE0 and CE1 pins are at the "H" level , access to this Real time clock module becomes possible. The chip enabled input pin 1. When the CE1 pin is at the HIGH level, the FOUT pin is in the output state. The shift clock input pin for serial data transfer. 3.6 Signal Name Input / Output 1.2 Max. CE 1 0.5 DATA Rating Unit 5 23 * x 10 1 Max. 3 Max. Current Consumption -6 s I32k s *Equivalent to 1 minute of monthly deviation http://www.epsontoyocom.co.jp T a = -40 C to +85 C Condition Min. Typ. Max. CE0, CE1 = GND VDD =5V 0.45 0.9 FOUT ;output OFF ( Hi - z ) VDD =3V 0.35 0.7 CE0 = GND CE1 = VDD VDD =5V 8.0 20.0 FOUT ; 32.768 kHz output ON CL = 30 pF VDD =3V 5.0 12.0 Unit A A "Quartz + MEMS" EPSON TOYOCOM In order to meet customer needs in a rapidly advancing digital, broadband and ubiquitous society, we are committed to offering products that are one step ahead of the market and a rank above the rest in quality. To achieve our goals, we follow a "3D (three device) strategy" designed to drive both horizontal and vertical growth. We will to grow our three device categories of "Timing Devices", "Sensing Devices" and "Optical Devices", and expand vertical growth through a combination of products from these categories. Quartz devices have become crucial in the network environment where products are increasingly intended for broadband, ubiquitous applications and where various types of terminals can transfer information almost immediately via LAN and WAN on a global scale. Epson Toyocom Corporation addresses every single aspect within a network environment. The new corporation offers "Digital Convergence" solutions to problems arising with products for consumer use, such as, core network systems and automotive systems. A Quartz MEMS is any high added value quartz device that exploits the characteristics of quartz crystal material but that is produced using MEMS (micro-electro-mechanical system) processing technology. Market needs are advancing faster than previously imagined toward smaller, more stable crystal products, but we will stay ahead of the curve by rolling out products that exceed market speed and quality requirements. We want to further accelerate the 3D strategy by QMEMS. PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Epson Toyocom, all environmental initiatives operate under the Plan-Do-Check-Action(PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO 14001 environmental management standard. All of our major manufacturing and non-manufacturing sites, in Japan and overseas, completed the acquisition of ISO 14001 certification. In the future, new group companies will be expected to acquire the certification around the third year of operations. ISO 14000 is an international standard for environmental management that was established by the International Standards Organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Epson Toyocom made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. QS-9000 is an enhanced standard for quality assurance systems formulated by leading U.S.automobile manufacturers based on the international ISO 9000 series. ISO/TS 16949 is a global standard based on QS-9000, a severe standard corresponding to the requirements from the automobile industry. Notice This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Epson Toyocom. The information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. Epson Toyocom does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing on for any patent or intellectual copyrights. Any product described in this material may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Epson Toyocom in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. In this new crystal master for Epson Toyocom, product codes and markings will remain as previously identified prior to the merger. Due to the on-going strategy of gradual unification of part numbers, please review product codes and markings, as they will change during the course of the coming months. We apologize for the inconvenience, but we will eventually have a unified part numbering system for Epson Toyocom that will be user friendly.