Series 107-70 Nylon Extractor
nVent.com/SCHROFF 1-800-854-7086
nVent may modify standard parts without prior notice to or approval from customers. These modications may change product appearance, but will not have a detrimental effect on form, t or function. ©2018 nVent. All nVent marks and logos are
owned or licensed by nVent Services GmbH or its aliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specications without notice.
SERIES 107-70 LATCHING NYLON INSERTER / EXTRACTOR
MATERIALS
Extractor
Molded in Glass Filled (30%) 6/6
or Type 6 Nylon. Main handle is
UL94-V0, but latch is UL94-V2.
Assembly Pin
Stainless steel, passivated
COLOR
Series 107-70 standard color is
black. Other colors available, please
contact an Application Engineer
with your requirements.
HOT STAMPING
Hot stamp marking service is available.
Please contact an Application Engineer
with your requirements.
APPLICATION DATA
Two inserter or inserter-extractors are
recommended per printed circuit board
taller than 127 (5) in height.
0
[blank]
3
4
[blank]
7
Series 107- 0 extractor for
PCB thickness of 2.4 (.094)
Units: mm (in)
.xx ± .25, .x ±.5
(.xxx ± .010, .xx ± .02)
Assembly Pin
70
2.38
(.094)
Dia.
22.86±.13
(.900 ± .005)
2.28 ±.13
(.090 ±005)
6.35
(.250) 18.5 (.73)
9.1
(.36)
6.35
(.250)
2.77
(.109)
Dia.
1.5 (.06)
7.24 ±.38
(.285 ± .015) Card Guide
Surface
1.5 (.06) max.
6.1 (.24) min.
22.35(.880)
47.5
(1.87)
3.96
(.156) R
12.06
(.475)
11.05
(.435 ) 7.37*
8.89 (.350) (.290)
*
for 3.2 (.125)
thick boards
ASSEMBLY PIN
Option to be pre-started for:
• Faster and easier installation of the
extractor to the PCB
• Eliminates the need for special tools or
equipment and set up time.
• Eliminates loss of loose assembly pins
If the “P” option is not selected, the
extractors and the pins will be packaged
seperately.
