1
Revision Date: 11/4/2009
New Product
Silicon Zener Diode Series
1N746AUR thru 1N759AUR, 1N4370AUR thru 1N4372AUR,
CDLL746A thru CDLL759A & CDLL4370A thru CDLL4372A
Maximum Ratings
Operating Temperature: -65°C to +175°C
Storage Temperature: -65°C to +175°C
DC Power Dissipation: 500 mW @ TEC = +125°C
Power Derating: 10 mW / °C above TEC = +125°C
Forward Voltage @ 200mA: 1.1 volts maximum
Features
Available in JAN, JANTX and JANTXV
per MIL-PRF-19500/127
Leadless Package for Surface Mount
• Metallurgically Bonded
JEDEC NOMINAL ZENER MAXIMUM MAXIMUM MAXIMUM
TYPE ZENER TEST ZENER REVERSE CURRENT ZENER
NUMBER VOLTAGE CURRENT IMPEDANCE IR@ VRCURRENT
VZ@ IZT IZT (NOTE 3) IZM
(NOTE 1) (NOTE 2) ZZT@ IZT
VOLTS mA OHMS μA VOLTS mA
CDLL4370A 2.4 20 30 100 1.0 155
CDLL4371A 2.7 20 30 60 1.0 140
CDLL4372A 3.0 20 29 30 1.0 125
CDLL746A 3.3 20 28 5 1.0 120
CDLL747A 3.6 20 24 3 1.0 110
CDLL748A 3.9 20 23 2 1.0 100
CDLL749A 4.3 20 22 2 1.0 90
CDLL750A 4.7 20 19 5 1.5 85
CDLL751A 5.1 20 17 5 2.0 75
CDLL752A 5.6 20 11 5 2.5 70
CDLL753A 6.2 20 7 5 3.5 65
CDLL754A 6.8 20 5 2 4.0 60
CDLL755A 7.5 20 6 2 5.0 55
CDLL756A 8.2 20 8 1 6.0 50
CDLL757A 9.1 20 10 1 7.0 45
CDLL758A 10.0 20 17 1 8.0 40
CDLL759A 12.0 20 30 1 9.0 35
Electrical Specifications @ +25 ºC (Unless Otherwise Specified)
NOTE 1: Zener voltage tolerance on "A" suffix is +5%. No Suffix denotes +10% tolerance,
"C" suffix denotes +2% tollerance and "D" suffix denotes +1% tolerance.
NOTE 2: Zener voltage is measured with the device junction in thermal equilibrium at an ambient
temperature of 25°C + 3°C.
NOTE 3: Zener impedance is derived by superimposing on IZT A 60Hz rms a.c. current equal to 10% of IZT
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Revision Date: 11/4/2009
Aeroflex / Metelics, Inc.
975 Stewart Drive, 54 Grenier Field Road,
Sunnyvale, CA 94085 Londonderry, NH 03053
Tel: (408) 737-8181 Tel: (603) 641-3800
Fax: (408) 733-7645 Fax: (603)-641-3500
Sales: 888-641-SEMI (7364)
Hi-Rel Components
9 Hampshire Street,
Lawrence, MA 01840
Tel: (603) 641-3800
Fax: (978) 683-3264
www.aeroflex.com/metelics-hirelcomponents
Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services
herein at any time without notice. Consult Aeroflex or an authorized sales representative to
verify that the information in this data sheet is current before using this product. Aeroflex
does not assume any responsibility or liability arising out of the application or use of any
product or service described herein, except as expressly agreed to in writing by Aeroflex;
nor does the purchase, lease, or use of a product or service from Aeroflex convey a license
under any patent rights, copyrights, trademark rights, or any other of the intellectual rights
of Aeroflex or of third parties.
Copyright 2009 Aeroflex / Metelics. All rights reserved.
www.aeroflex.com/metelics metelics-sales@aeroflex.com
ISO 9001: 2008 certified companies
1N746AUR thru 1N759AUR, 1N4370AUR thru 1N4372AUR,
CDLL746A thru CDLL759A & CDLL4370A thru CDLL4372A
LEADED DESIGN DATA
CASE: DO-213AA, Hermetically sealed glass case. (MELF, SOD-80, LL34)
LEAD FINISH: Tin / Lead
THERMAL RESISTANCE: (RӨJEC): 100 ˚C/W maximum at L = 0 inch
THERMAL IMPEDANCE: (ZӨJX): 25 ˚C/W maximum
POLARITY: Diode to be operated with the banded (cathode) end positive.
MOUNTING POSITION: Any.
MOUNTING SURFACE SELECTION: The Axial Coefficient of Expansion (COE)
Of this Device is Approximately +6 PPM/°C. The COE of the Mounting Surface
System Should Be Selected To Provide A Suitable Match With This Device.
D
G
G1
F
S
Outline Drawing
Graphs