SBR3040CT SBR3040CTFP 30A SBR(R) SUPER BARRIER RECTIFIER Features Mechanical Data * * * * * * * * Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability Lead Free Finish, RoHS Compliant (Note 1) Also Available in Green Molding Compound (Note 2) TO-220AB Top View TO-220AB Bottom View * * Case: TO-220AB, ITO-220AB Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: TO-220AB - 1.85 grams (approximate) ITO-220AB - 1.65 grams (approximate) ITO-220AB Top View ITO-220AB Bottom View Package Pin Out Configuration Ordering Information (Notes 2 & 3) Part Number SBR3040CT SBR3040CT-G SBR3040CTFP SBR3040CTFP-G SBR3040CTFP-JT Notes: Case TO-220AB TO-220AB ITO-220AB ITO-220AB ITO-220AB (Alternate) Packaging 50 pieces/tube 50 pieces/tube 50 pieces/tube 50 pieces/tube 50 pieces/tube 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. For Green Molding Compound version part numbers, add "-G" suffix to part number above. Examples: SBR3040CT-G. 3. For packaging details, go to our website at http://www.diodes.com. Marking Information SBR3040CT SBR3040CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year( ex: 06 = 2006) WW = Week (01 - 53) SBR3040CTFP YYWW AB YYWW AB SBR is a registered trademark of Diodes Incorporated. SBR3040 Document number: DS30972 Rev.5 - 2 SBR3040CTFP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 06 = 2006) WW = Week (01 - 53) 1 of 5 www.diodes.com October 2011 (c) Diodes Incorporated SBR3040CT SBR3040CTFP Maximum Ratings (Per Leg) @TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current Symbol VRRM VRWM VRM (Per Leg) (Total) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Peak Repetitive Reverse Surge Current (2uS-1Khz) Isolation Voltage (ITO-220AB Only) From terminal to heatsink t = 3 sec. Value Unit 40 V IO 15 30 A IFSM 200 A IRRM 2 A VAC 2000 V Symbol Value Unit RJC 2 4 -65 to +150 C/W Thermal Characteristics (Per Leg) Characteristic Typical Thermal Resistance (per leg) Package = TO-220AB Package = ITO-220AB Operating and Storage Temperature Range TJ, TSTG C Electrical Characteristics (Per Leg) @TA = 25C unless otherwise specified Characteristic Symbol Min Forward Voltage Drop VF - Leakage Current (Note 4) IR - Notes: Typ 0.48 Max 0.55 0.50 - 0.5 100 Unit V mA Test Condition IF = 15A, TJ = 25C IF = 15A, TJ = 125C VR = 40V, TJ = 25C VR = 40V, TJ = 125C 4. Short duration pulse test used to minimize self-heating effect. SBR is a registered trademark of Diodes Incorporated. SBR3040 Document number: DS30972 Rev.5 - 2 2 of 5 www.diodes.com October 2011 (c) Diodes Incorporated 15 I F, INST ANTANEOU S FORWAR D CURRENT (A) IF(AVE), AVERAGE FORWARD CURRENT (A) SBR3040CT SBR3040CTFP 10 5 100 10 TA = 150C 1 TA = 125C TA = 75C T A = 25C 0.1 0 0 25 50 75 100 125 0.00 150 0.10 TC, CASE TEMPERATURE (C) Figure 1: Current Derating Curve, Per Element IR, IN STA NTANEOUS REVERSE CU RREN T (mA) 0.20 0. 30 0.40 0.50 0.60 0.70 VF , INSTANT AN EOUS FORWARD VOL TAGE ( V) Figure 2: Typical Forward Characteristics, Per Element 100 T A = 150C TA = 125C 10 TA = 75C 1 T A = 25C 0.1 0 10 20 30 40 VR, I NST AN TANEOUS REVERSE VOLT AGE (V) Figure 3: Typical Reverse Characteristics, Per Element SBR is a registered trademark of Diodes Incorporated. SBR3040 Document number: DS30972 Rev.5 - 2 3 of 5 www.diodes.com October 2011 (c) Diodes Incorporated SBR3040CT SBR3040CTFP Package Outline Dimensions TO-220AB Dim Min Typ Max A1 P A 3.56 4.82 A1 0.51 1.39 H1 A2 2.04 2.92 b 0.39 0.81 1.01 b2 1.15 1.24 1.77 c 0.356 0.61 D 14.22 16.51 L1 D1 8.39 9.01 e 2.54 e1 5.08 E 9.66 10.66 H1 5.85 6.85 c L 12.70 14.73 b L1 6.35 A2 P 3.54 4.08 *Guaranteed by TO-220AB leadframe design Q 2.54 3.42 All Dimensions in mm SEATING PLANE 16.00 0.20* Q D D1 A A1 Q 10 D 5 5 D1 L1 1 2 3 5 5 3 x b1 L b2 OP E A E e e1 A E F OP Q + D Not Through Holes 1 2 3 b2 L1 A1 L2 J1 b1 L b c e Notes: A2 3xb L 2xe c ITO-220AB (Note 5) Dim Min Typ Max A 4.50 4.70 4.90 A1 3.04 3.24 3.44 A2 2.56 2.76 2.96 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 c 0.50 0.60 0.70 D 15.67 15.87 16.07 D1 8.99 9.19 9.39 e 2.54 E 9.91 10.11 10.31 L 9.45 9.75 10.05 L1 15.80 16.00 16.20 P 2.98 3.18 3.38 Q 3.10 3.30 3.50 All Dimensions in mm ITO-220AB ALTERNATE (Note 5) DIM. MIN. MAX. A 4.30 4.70 A1 1.3 b 0.50 0.75 b1 1.10 1.35 b2 1.50 1.75 c 0.50 0.75 D 14.80 15.20 E 9.96 10.36 e 2.54 typ F 2.80 3.20 J1 2.50 2.90 L 12.80 13.60 L1 1.70 1.90 L2 1.90 2.10 OP 3.50 typ Q 2.70 typ All Dimensions in mm 5. For product manufactured with Date Code 0733 (week 33, 2007) and newer, please refer to ITO-220AB dimensions. For product manufactured prior to Date Code 0733, please refer to ITO-220AB ALTERNATE dimensions. SBR is a registered trademark of Diodes Incorporated. SBR3040 Document number: DS30972 Rev.5 - 2 4 of 5 www.diodes.com October 2011 (c) Diodes Incorporated SBR3040CT SBR3040CTFP IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2011, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR3040 Document number: DS30972 Rev.5 - 2 5 of 5 www.diodes.com October 2011 (c) Diodes Incorporated