SBR3040
Document number: DS30972 Rev.5 - 2 1 of 5
www.diodes.com October 2011
© Diodes Incorporated
SBR3040CT
SBR3040CTFP
SBR is a registered trademark of Diod es Incorporated.
30A SBR®
SUPER BARRIER RECTIFIER
Features
• Low Forward Voltage Drop
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• Lead Free Finish, RoHS Compliant (Note 1)
• Also Available in Green Molding Compound (Note 2)
Mechanical Data
• Case: TO-220AB, ITO-220AB
• Case Material: Molded Plastic, UL Flammability Classification
Rating 94V-0
• Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Weight: TO-220AB – 1.85 grams (approximate)
ITO-220AB – 1.65 grams (approximate)
Ordering Information (Notes 2 & 3)
Part Number Case Packaging
SBR3040CT TO-220AB 50 pieces/tube
SBR3040CT-G TO-220AB 50 pieces/tube
SBR3040CTFP ITO-220AB 50 pieces/tube
SBR3040CTFP-G ITO-220AB 50 pieces/tube
SBR3040CTFP-JT ITO-220AB (Alternate) 50 pieces/tube
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. For Green Molding Compound version part numbers, add "-G" suffix to part number above. Examples: SBR3040CT-G.
3. For packaging details, go to our website at http://www.diodes.com.
Marking Information
TO-220AB
Top View ITO-220AB
Top View Package Pin Out
Confi
g
uration
TO-220AB
Bottom View ITO-220AB
Bottom View
SBR3040CTFP = Product Type Marking Code
A
B = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last two digits of year (ex: 06 = 2006)
WW = Week (01 - 53)
SBR3040CT = Product Type Marking Code
A
B = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last two digits of year( ex: 06 = 2006)
WW = Week (01 - 53)
YYWW AB
SBR3040CTFP
SBR3040CT
YYWW AB
SBR3040
Document number: DS30972 Rev.5 - 2 2 of 5
www.diodes.com October 2011
© Diodes Incorporated
SBR3040CT
SBR3040CTFP
SBR is a registered trademark of Diod es Incorporated.
Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VRM 40 V
Average Rectified Output Current (Per Leg)
(Total)
IO 15
30 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load IFSM 200 A
Peak Repetitive Reverse Surge Current (2uS-1Khz) IRRM 2 A
Isolation Voltage (ITO-220AB Only)
From terminal to heatsink t = 3 sec. VAC 2000 V
Thermal Characteristics (Per Leg)
Characteristic Symbol Value Unit
Typical Thermal Resistance (per leg)
Package = TO-220AB
Package = ITO-220AB RθJC
2
4 ºC/W
Operating and Storage Temperature Range TJ, TSTG -65 to +150 ºC
Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop VF - -
0.48 0.55
0.50 V IF = 15A, TJ = 25ºC
IF = 15A, TJ = 125ºC
Leakage Current (Note 4) IR - -
0.5
100 mA VR = 40V, TJ = 25ºC
VR = 40V, TJ = 125ºC
Notes: 4. Short duration pulse test used to minimize self-heating effect.
SBR3040
Document number: DS30972 Rev.5 - 2 3 of 5
www.diodes.com October 2011
© Diodes Incorporated
SBR3040CT
SBR3040CTFP
SBR is a registered trademark of Diod es Incorporated.
0
5
10
15
0 25 50 75 100 125 150
TC, CASE TEMPERATURE (°C)
IF(AVE), AVERAGE FORWARD CURRENT (A)
0.1
1
10
100
0.00 0.10 0.20 0. 30 0.40 0.50
0
.60 0.70
V
F, INSTANTANEO US FORW ARD VOLTAGE (V)
IF, INSTANTANEOUS FORWARD CURRENT (A)
TA = 2 5 °C
TA = 125 °C
TA = 150 °C
TA = 75°C
Figure 1: Current Derating Curve, Per Element Figure 2: Typical Forward Characteristics, Per Element
0.1
1
10
100
0 10 2
0
30 40
V
R, INSTANTANEOUS REVERSE VOLTAGE (V)
IR, INSTANTANEOUS REVERS
E
CURRENT ( mA)
TA=150°C
T
A
=25°C
T
A
=125°C
T
A
= 75°
C
Figure 3: Typical Reverse Characteristics, Per Element
SBR3040
Document number: DS30972 Rev.5 - 2 4 of 5
www.diodes.com October 2011
© Diodes Incorporated
SBR3040CT
SBR3040CTFP
SBR is a registered trademark of Diod es Incorporated.
Package Outline Dimensions
Notes: 5. For product manufactured with Date Code 0733 (week 33, 2007) and new er, please refer to ITO-220AB dimensions. For product manufactured prior to
Date Code 0733, please refer to ITO-220AB ALTERNATE dimensions.
ITO-220AB
(Note 5)
Dim Min Typ Max
A 4.50 4.70 4.90
A1 3.04 3.24 3.44
A2 2.56 2.76 2.96
b 0.50 0.60 0.75
b1 1.10 1.20 1.35
c 0.50 0.60 0.70
D 15.67 15.87 16.07
D1 8.99 9.19 9.39
e 2.54
E 9.91 10.11 10.31
L 9.45 9.75 10.05
L1 15.80 16.00 16.20
P 2.98 3.18 3.38
Q 3.10 3.30 3.50
All Dimensions in mm
TO-220AB
Dim Min Typ Max
A 3.56 - 4.82
A1 0.51 - 1.39
A2 2.04 - 2.92
b 0.39 0.81 1.01
b2 1.15 1.24 1.77
c 0.356 - 0.61
D 14.22 - 16.51
D1 8.39 - 9.01
e 2.54
e1 5.08
E 9.66 - 10.66
H1 5.85 - 6.85
L 12.70 - 14.73
L1 - - 6.35
P 3.54 - 4.08
Q 2.54 - 3.42
All Dimensions in mm
ITO-220AB
ALTERNATE
(Note 5)
DIM. MIN. MAX.
A 4.30 4.70
A1 1.3
b 0.50 0.75
b1 1.10 1.35
b2 1.50 1.75
c 0.50 0.75
D 14.80 15.20
E 9.96 10.36
e 2.54 typ
F 2.80 3.20
J1 2.50 2.90
L 12.80 13.60
L1 1.70 1.90
L2 1.90 2.10
ØP 3.50 typ
Q 2.70 typ
All Dimensions in mm
E
ØP
Q
b1
L1 b2
L2
b
e
F
D
L
A1
J1
c
Not Through Holes
123
+
A
5° 5°
5°
5°
10°
E
Q
D
D1L1
3 x b1
3 x b
2 x e
L
Ø
P
AA1
A2
c
123
AA1
c
D
E
L
b
e1
b2
P
H1
Q
L1
A2
e
SEATIN G PLANE
D1
16.00 0.20*
±
*Guaranteed by TO-220AB leadframe design
SBR3040
Document number: DS30972 Rev.5 - 2 5 of 5
www.diodes.com October 2011
© Diodes Incorporated
SBR3040CT
SBR3040CTFP
SBR is a registered trademark of Diod es Incorporated.
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Cus tomer or user of this document or prod ucts described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the e xpress
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause
the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
