Metal Thin Film Chip Resistors ( RB series Standard ) Document No TRB-XXOS002N Issued date 2009/03/21 page 1/12 1. Scope : This specification applies for the RB series of metal thin film chip resistors made by TA-I. 2. Construction: Over Coat Sn Plating Ni Plating Resistive Element Inner electrode Ceramic Substrate 3. Type Designation: RB 10 Product Code Size RB : Metal Thin Film B Tolerance T P 1001 Packaging TCR Nominal Power Rating Resistance 02-0201(0603)1/20W A- 0.05% 04-0402(1005) 1/16W B- 0.10% Tape k- 10 ppm 06-0603(1608) 1/10W C- 0.25% B- Bulk M- 15 ppm 10-0805(2012) 1/8W D- 0.50% 12-1206(3216) 1/4W F- 1.00% 13-1210(3226) 1/5W T- Paper J- 5 ppm Cassette e.g., 1001=1k P- 25 ppm S- 50 ppm R- 100 ppm 20-2010(5025) 1/4W 25-2512(6432) 1/2W TA-I TECHNOLOGY CO., LTD Document No TRB-XXOS002N Issued date 2009/03/21 page 2/12 Metal Thin Film Chip Resistors ( RB series Standard ) 4. Dimensions: 1001 UNIT: mm Type L W C d t RB02 0.63 0.03 0.30 0.03 0.1 0.05 0.15 0.05 0.25 0.05 RB04 1.00 0.05 0.50 0.05 0.20 0.10 0.25 0.10 0.35 0.05 RB06 1.60 0.10 0.80 0.10 0.30 0.20 0.30 0.20 0.10 0.45 0.10 RB10 2.00 0.10 1.25 0.10 0.40 0.20 0.40 0.20 0.50 0.10 RB12 3.10 0.10 1.55 0.10 0.50 0.30 0.40 0.20 0.55 0.10 RB13 3.10 0.10 2.55 0.10 0.50 0.30 0.40 0.20 0.60 0.10 RB20 5.00 0.15 2.50 0.15 0.60 0.30 0.50 0.25 0.60 0.10 RB25 6.30 0.20 3.20 0.20 0.60 0.30 0.50 0.25 0.60 0.10 TA-I TECHNOLOGY CO., LTD Metal Thin Film Chip Resistors ( RB series Standard ) Document No TRB-XXOS002N Issued date 2009/03/21 page 3/12 5. Ratings & Characteristics Power Rating at 70 Rated Voltage Max. Working Voltage Max. Over- Load Voltage RB02 1/32 W Refer 5.2 15V 30V RB04 1/16 W Refer 5.2 50V 100V Type T.C.R (PPM/) 25 50 25 50 Resistance Range 50~10K 0.5 1.0 2K~50K 0.05 10~100K 0.1 1.0 1~9.1 0.5 1.0 10~390K 0.1 1.0 1~9.1 0.5 1.0 10~800K 0.1 1.0 1~9.1 0.5 10 25 RB04 1/16 W Refer 5.2 50V 100V 50 Resistance tolerance(%) 100 RB06 1/10 W Refer 5.2 75V 150V 50 100 10 25 RB06 1/10W Refer 5.2 75V 150V 50 100 RB10 1/8 W Refer 5.2 150V 300V 50 100 10 25 RB10 1/8 W Refer 5.2 150V 300V 50 100 RB12 1/4 W Refer 5.2 150V 300V 50 100 1.0 10 25 RB12 1/4 W Refer 5.2 150V 300V 50 10~1M 0.1 1.0 4.7~1M 0.05 4.7~1M 0.05 4.7~3M 0.1 1~3M 0.25 0.50 100 RB13 RB20 1/5 W 1/4 W Refer 5.2 Refer 5.2 150V 150V 300V 300V 25 50 25 50 TA-I TECHNOLOGY CO., LTD Metal Thin Film Chip Resistors ( RB series Standard ) RB25 1/2 W 150V Refer 5.2 25 50 300V Document No TRB-XXOS002N Issued date 2009/03/21 page 4/12 4.7~1M 0.05 4.7~3M 0.1 0.25 0.50 1~3M Operating Temp(): -55 ~ +125 Note : Except for the above standardized products, we also provide the customized products. 5.1 Derating Curve : For resistors operated at ambient temperature over 70 , power rating shall be derated according to figure 1. 100 P max. Power ratio ( % ) 50 0 -55 50 70 100 Ambient 125 Temp. ( C ) Figure 1 5.2 Rated Voltage: The rated voltage is calculated by the following formula: E= P * R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value( TA-I TECHNOLOGY CO., LTD Metal Thin Film Chip Resistors ( RB series Standard ) Document No TRB-XXOS002N Issued date 2009/03/21 page 5/12 6. Reliability Tests:(As specified in JIS C 5202) Test Items Reference standard Temperature Coefficient of JIS-C5202-5.2 Resistance Condition of Test +25 ~ +125 Test Limits Refer 5.0 -55(30 min. ) / +125(30 min. ), 5 (0.5%+0.05) cycles Rapid Change of Temp. JIS-C5202-7.4 Short Time Overload JIS-C5202-5.5 2.5 X rated voltage for 5sec (0.5% + 0.05) Resistance to Dry Heat JIS-C5202-7.2 1255 for 964Hrs (0.5% +0.05) Load Life JIS-C5202-7.10 Resistance to Solder Heat JIS-C5202-6.10 270 5 solder , 10 1 sec dwell . (0.5% +0.05) Bending JIS-C5202--6.1 3mm deflection (0.5% +0.05) 1000 hours at rated power , 70 , (0.5% +0.05) 1.5hoursON , 0.5hour OFF Applying voltage : Dielectric Withstanding 0201 : 50V , 0402 & 0603 : 300V JIS-C5202-5.7 Voltage (Voltage Proof) The other 500V for a minute . No abnormalities such as flashover, burning dielectric breakdown shall appear. Load Life with Humidity JIS-C5202-7.5 402, 90~95% RH for 1000 hours Insulation Resistance JIS-C5202-5.6 Solderability 5 solder, 2 0.5 sec dwell. JIS-C5202-6.11 245Solder : Sn96.5 / Ag3.0 / Cu0.5 Vibration ML-STD-202 Method 204 5 gs for 20 minutes, 12 cycles each of (0.5%+0.05) 3 orientations. Mech anical shock ML-ST-D202 Method 213 Wave form : Tolerance for half sine shock pulse Peakvalue is 100 gs (0.5%+0.05) Normal duration (D) is 6. Applying voltage 100V for 1 minute. Remark : 0201 50V (0.5% +0.05) 1G At least 95% of surface area of electrode shall be covered with new solder. Note* :RCWV : Rated continuous working voltage . TA-I TECHNOLOGY CO., LTD Metal Thin Film Chip Resistors ( RB series Standard ) Document No TRB-XXOS002N Issued date 2009/03/21 page 6/12 7. Marking 7.1 0.1% , 0.5% , 1% (E96 ) : RB10 / RB12 Resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant figures of nominal resistance value in, and the fourth digit represents exponent for base of 10. 0 E.G. : 7.2 1000 = 100x10 = 100 0.1% , 0.5% , 1% (RB06/E96) When the marking space is too small in such small-sized resistors as RB06, the marking can not made by 4 digits and may be made by two digits combined with one English capital. Symbol for E96 series nominal resistance value Symbol 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 Symbol 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 Symbol 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 Symbol 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Symbol for multipliers Symbol multipliers A B 0 10 C 1 10 D 2 10 E 3 F 4 10 10 G 5 10 6 10 H 10 X 7 -1 10 Y -2 10 Z 10 -3 2 Ex: 02c=102 x10 =10.2k TA-I TECHNOLOGY CO., LTD Document No TRB-XXOS002N Issued date 2009/03/21 page 7/12 Metal Thin Film Chip Resistors ( RB series Standard ) 01A Notes : When the resistance value is not in the list of E96 , 3 digitals with underline in E-24 series is used as mark . E.G. : 0603 , 120 , 1% Marking is 121 121 7.3 0.1% , 0.5% , 1%( E96/3digitals) The resistance value by 3 digits is requirement for customer. 7.4 No Marking for RB04 8. Taping & Reel 8.1 Taping Dimensions 8.1.1 4 mm pitch paper Packing Type RB06 RB10 Paper Tape RB12 RB13 A B 1.10.1 1.90.1 1.60.15 2.40.2 2.00.15 3.60.2 2.80.2 3.60.2 W F E P1 P2 P0 D0 T 0.640.1 8.00.2 3.50.05 1.750.1 4.00.1 2.00.1 4.00.1 +0.1 1.5 -0 0.840.1 UNIT: mm TA-I TECHNOLOGY CO., LTD Document No TRB-XXOS002N Issued date 2009/03/21 page 8/12 Metal Thin Film Chip Resistors ( RB series Standard ) 8.1.2 2 mm pitch paper Packing Type A RB02 0370.05 RB04 0.70.05 B W F E 10.670.1 Paper P1 2.00.1 8.00.2 3.50.05 P2 T 0.370.1 4.00.1 2.00.1 D0 2.00.05 1.750.1 1.20.05 P0 +0.1 1.5 -0 2.00.1 0.450.1 UNIT: mm 8.1.3 4 mm pitch Emboss Packing Type RB20 A B 2.80.2 5.30.2 Emboss RB25 3.60.2 W F E P1 P2 P0 12.00.2 5.50.05 1.750.1 4.00.1 2.00.05 4.00.05 D0 +0.1 1.5 -0 T 0.850.15 6.90.2 UNIT: mm TA-I TECHNOLOGY CO., LTD Metal Thin Film Chip Resistors ( RB series Standard ) 8.1.4 Document No TRB-XXOS002N Issued date 2009/03/21 page 9/12 Bulk Case Specifications: Paper Tape Type Size RB RB RB RB RB RB RB RB 02 04 06 10 12 13 20 25 4 mm pitch 2 mm pitch 180mm/R 180mm/R Emboss Plastic Tape 4 mm pitch 10000 10000 5000 5000 5000 5000 4000 4000 8.2 Reel Specifications Type A RB02 /04 / 06 RB10 / 12/13 178.0 2.0 RB20 / 25 B 60.0 1.0 C W T 9.0 1.0 11.4 1.0 13.0 1.0 15.5 1.0 13.0 1.0 UNIT: mm TA-I TECHNOLOGY CO., LTD Metal Thin Film Chip Resistors ( RB series Standard ) Document No TRB-XXOS002N Issued date 2009/03/21 page 10/12 8.3 Peel - off force : Peel - off force of paper and blister tape is in accordance with JIS that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute. pull 300 mm/min top cover tape 10 ~ 15 standard: 0.1 ~ 0.7 N carrier tape UNIT:mm 10. Label 10.1 Normal Products : Date Code Resistance Tolerance Type QTY: 5000 PCS 1001 Lot No: T00510136k 1005 BTP RB06BTP Manufacture Label 11. Recommended land patterns TA-I TECHNOLOGY CO., LTD Metal Thin Film Chip Resistors ( RB series Standard ) Land pattern Type RB RB RB RB RB RB RB RB a Size 02(0201 ) 04 (0402 ) 06 (0603 ) 10 (0805 ) 12 (1206 ) 13 (1210 ) 20 (2010 ) 25 (2512 ) Dimension b 0.25 ~ 0.3 0.5 ~ 0.6 0.7 ~ 0.9 1.0 ~ 1.4 2.0 ~ 2.4 2.0 ~ 2.4 3.3 ~ 3.7 3.6 ~ 4.0 Document No TRB-XXOS002N Issued date 2009/03/21 page 11/12 ( mm ) 0.7 ~ 0.9 1.4 ~ 1.6 2.0 ~ 2.2 3.2 ~ 3.8 4.4 ~ 5.0 4.4 ~ 5.0 5.7 ~ 6.5 7.6 ~ 8.6 c 0.3 ~ 0.4 0.4 ~ 0.6 0.8 ~1.0 0.9 ~ 1.4 1.2 ~ 1.8 2.3 ~ 3.5 2.3 ~ 3.5 2.3 ~ 3.5 12. ECN Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. 13. Storage Conditions: Temperature: 5~35,Humidity:40%~75% 14. Shelf Life: 2 years from manufacturing date. 15. Recommend IR - Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5) Peak : 250 5 0 , 5 sec Pre - heat Zone : 150 to 180 , 9030 sec Soldering Zone : 230 or higher , 3010 sec TA-I TECHNOLOGY CO., LTD Document No TRB-XXOS002N Issued date 2009/03/21 page 12/12 Metal Thin Film Chip Resistors ( RB series Standard ) 16. Manufacturing Country & City : TA-I TECHNOLOGY CO., LTD. ( Taiwan- Tao Yuan ) Tel: (+886) 3-3246169 Fax : (+886) 3-3246167 Associated companies : (1)TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China - Su Zhou) Tel :(+86) 512-63457879 Fax : (+86) 512-63457869 (2) TA-I TECHNOLOGY ELECTRONIC (DONGGUAN ) CO., LTD. ( China -Dongguan ) Tel : (+86) 769-8339-47903 Fax : (+86) 769-8339-4794 (3) FORTUNE TASK RESISTOR FACTORY ( China - Dongguan ) Tel : (+86) 769-8339-47903 Fax : (+86) 769-8339-4794 (4) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia - Penang ) Tel :(+60) 4- 3900480 Fax : (+60) 4-3901481 (5) P.T.TAI ELECTRONIC Indonesia ( Indonesia - Jakarta ) Tel :(+62) 21-44820254 Fax : (+62) 21-44820256 TA-I TECHNOLOGY CO., LTD