TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 D D D D D D Supply Current . . . 300 A Max High Unity-Gain Bandwidth . . . 2 MHz Typ High Slew Rate . . . 0.45 V/s Min Supply-Current Change Over Military Temp Range . . . 10 A Typ at VCC = 15 V Specified for Both 5-V Single-Supply and 15-V Operation Phase-Reversal Protection D High Open-Loop Gain . . . 6.5 V/V D D D D (136 dB) Typ Low Offset Voltage . . . 100 V Max Offset Voltage Drift With Time 0.005 V/mo Typ Low Input Bias Current . . . 50 nA Max Low Noise Voltage . . . 19 nV/Hz Typ description The TLE202x, TLE202xA, and TLE202xB devices are precision, high-speed, low-power operational amplifiers using a new Texas Instruments Excalibur process. These devices combine the best features of the OP21 with highly improved slew rate and unity-gain bandwidth. The complementary bipolar Excalibur process utilizes isolated vertical pnp transistors that yield dramatic improvement in unity-gain bandwidth and slew rate over similar devices. The addition of a bias circuit in conjunction with this process results in extremely stable parameters with both time and temperature. This means that a precision device remains a precision device even with changes in temperature and over years of use. This combination of excellent dc performance with a common-mode input voltage range that includes the negative rail makes these devices the ideal choice for low-level signal conditioning applications in either single-supply or split-supply configurations. In addition, these devices offer phase-reversal protection circuitry that eliminates an unexpected change in output states when one of the inputs goes below the negative supply rail. A variety of available options includes small-outline and chip-carrier versions for high-density systems applications. The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from - 40C to 85C. The M-suffix devices are characterized for operation over the full military temperature range of - 55C to 125C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. Copyright (c) 2010, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2021 AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax AT 25C SMALL OUTLINE (D) SSOP (DB) CHIP CARRIER (FK) CERAMIC DIP (JG) PLASTIC DIP (P) TSSOP (PW) CHIP FORM (Y) 0C 0 C to 70C 200 V 500 V TLE2021ACD TLE2021CD TLE2021CDBLE -- -- TLE2021ACP TLE2021CP -- TLE2021CPWLE -- TLE2021Y -40C to 85C 200 V 500 V TLE2021AID TLE2021ID -- -- -- TLE2021AIP TLE2021IP -- -- -55 C -55C to 125C 100 V V 500 V -- TLE2021MD -- TLE2021BMFK TLE2021MFK TLE2021BMJG TLE2021MJG -- TLE2021MP -- -- The D packages are available taped and reeled. To order a taped and reeled part, add the suffix R (e.g., TLE2021CDR). The DB and PW packages are only available left-end taped and reeled. Chip forms are tested at 25C only. TLE2022 AVAILABLE OPTIONS PACKAGED DEVICES CHIP CARRIER (FK) CERAMIC DIP (JG) PLASTIC DIP (P) TSSOP (PW) CHIP FORM (Y) -- TLE2022CDBLE -- -- -- TLE2022ACP TLE2022CP -- -- TLE2022CPWLE -- -- TLE2022Y TLE2022BID TLE2022AID TLE2022ID -- -- -- -- TLE2022AIP TLE2022IP -- -- -- TLE2022AMD TLE2022MD -- -- TLE2022AMFK TLE2022MFK TLE2022BMJG TLE2022AMJG TLE2022MJG -- TLE2022AMP TLE2022MP -- -- TA VIOmax AT 25C SMALL OUTLINE (D) 0C to 70C 150 V 300 V 500 V TLE2022BCD TLE2022ACD TLE2022CD -40C to 85C 150 V 300 V 500 V -55 C -55C to 125C 150 V 300 V 500 V SSOP (DB) -- The D packages are available taped and reeled. To order a taped and reeled part, add the suffix R (e.g., TLE2022CDR). The DB and PW packages are only available left-end taped and reeled. Chip forms are tested at 25C only. TLE2024 AVAILABLE OPTIONS PACKAGED DEVICES 2 TA VIOmax AT 25C 0C 0 C to 70C 500 V 750 V 1000 V -40C 40 C to 85C 85 C -55C 55 C to 125C 125 C SMALL OUTLINE (DW) CHIP FORM (Y) CHIP CARRIER (FK) CERAMIC DIP (J) PLASTIC DIP (N) TLE2024BCDW TLE2024ACDW TLE2024CDW -- -- TLE2024BCN TLE2024ACN TLE2024CN -- -- TLE2024Y 500 V 750 V 1000 V TLE2024BIDW TLE2024AIDW TLE2024IDW -- -- TLE2024BIN TLE2024AIN TLE2024IN -- 500 V 750 V 1000 V TLE2024BMDW TLE2024AMDW TLE2024MDW TLE2024BMFK TLE2024AMFK TLE2024MFK TLE2024BMJ TLE2024AMJ TLE2024MJ TLE2024BMN TLE2024AMN TLE2024MN -- Chip forms are tested at 25C only. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2021 D, DB, JG, P, OR PW PACKAGE (TOP VIEW) 1 8 2 7 3 6 4 5 NC OFFSET N1 NC NC NC OFFSET N1 IN- IN+ VCC - /GND TLE2021 FK PACKAGE (TOP VIEW) NC VCC+ OUT OFFSET N2 NC IN- NC IN+ NC 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC VCC+ NC OUT NC NC V CC-/ GND NC OFFSET N2 NC NC - No internal connection 4 1OUT 1IN- 1IN+ VCC - /GND 1 8 2 7 3 6 4 5 FK PACKAGE (TOP VIEW) NC 1OUT NC VCC + NC D, DB, JG, P, OR PW PACKAGE (TOP VIEW) VCC+ 2OUT 2IN- 2IN+ NC 1IN - NC 1IN + NC 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC 2OUT NC 2IN - NC NC V CC-/ GND NC 2IN + NC NC - No internal connection 4 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 4OUT 4IN- 4IN + VCC - /GND 3IN + 3IN - 3OUT NC NC - No internal connection J OR N PACKAGE (TOP VIEW) 1IN + NC VCC + NC 2IN + 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4IN + NC VCC - /GND NC 3IN + 1OUT 1IN - 1IN + VCC + 2IN + 2IN - 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN - 4IN + VCC - /GND 3IN + 3IN - 3OUT 2IN - 2OUT NC 3OUT 3IN - 1OUT 1IN - 1IN + VCC + 2IN + 2IN - 2OUT NC FK PACKAGE (TOP VIEW) 1IN - 1OUT NC 4OUT 4IN - DW PACKAGE (TOP VIEW) POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2021Y chip information This chip, when properly assembled, display characteristics similar to the TLE2021. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. This chip may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS (7) (6) (5) OFFSET N1 IN + IN - OFFSET N2 VCC+ (7) (1) (3) (2) + (6) - OUT (5) (4) VCC - /GND 78 CHIP THICKNESS: 15 MILS TYPICAL BONDING PADS: 4 x 4 MILS MINIMUM TJmax= 150C TOLERANCES ARE 10%. (4) (1) PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP. (2) (3) 54 4 ALL DIMENSIONS ARE IN MILS. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2022Y chip information This chip, when properly assembled, displays characteristics similar to TLE2022. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. This chip may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS (7) (6) VCC+ IN + IN - OUT (8) (3) (2) (8) + (1) - + (7) - (5) 80 (6) IN + IN - (4) (4) (1) (5) OUT VCC - CHIP THICKNESS: 15 MILS TYPICAL BONDING PADS: 4 x 4 MILS MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. (2) (3) PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP. 86 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2024Y chip information This chip, when properly assembled, displays characteristics similar to the TLE2024. Thermal compression or ultrasonic bonding may be used on the doped aluminum-bonding pads. This chip may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS VCC + 1IN + 1IN - 2OUT 2IN + 100 3IN - 4OUT (4) (3) + (2) (1) - + (7) (10) (9) - + (5) (6) (8) - + (14) - (12) (13) 1OUT 2IN + 2IN - 3OUT 4IN + 4IN - (11) VCC - /GND 140 CHIP THICKNESS: 15 MILS TYPICAL BONDING PADS: 4 x 4 MILS MINIMUM TJmax = 150C TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 equivalent schematic (each amplifier) VCC+ Q3 Q13 Q7 Q22 Q17 Q28 IN - IN + Q34 Q39 Q36 Q38 Q11 D3 Q2 Q32 Q24 Q20 Q8 Q35 Q29 Q19 Q1 Q5 Q31 C4 Q4 Q12 D4 Q14 D1 D2 R7 Q23 Q25 C2 Q10 OUT Q40 C3 Q21 Q27 R6 R1 C1 OFFSET N1 Q6 Q9 R2 R4 R3 R5 Q15 Q30 Q33 Q26 Q18 Q37 Q16 OFFSET N2 VCC - /GND ACTUAL DEVICE COMPONENT COUNT COMPONENT Transistors TLE2021 TLE2022 TLE2024 40 80 160 Resistors 7 14 28 Diodes 4 8 16 Capacitors 4 8 16 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 V Supply voltage, VCC - (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 V Input voltage range, VI (any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 mA Output current, IO (each output): TLE2021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA TLE2022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA TLE2024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA Total current into VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Total current out of VCC - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to 85C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55C to 125C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Case temperature for 60 seconds, TC: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, DP, P, or PW package . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC +, and VCC - . 2. Differential voltages are at IN+ with respect to IN -. Excessive current flows if a differential input voltage in excess of approximately 600 mV is applied between the inputs unless some limiting resistance is used. 3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 85C POWER RATING TA = 125C POWER RATING D-8 725 mW 5.8 mW/C 464 mW 377 mW 145 mW DB-8 525 mW 4.2 mW/C 336 mW -- -- DW-16 1025 mW 8.2 mW/C 656 mW 533 mW 205 mW FK 1375 mW 11.0 mW/C 880 mW 715 mW 275 mW J-14 1375 mW 11.0 mW/C 880 mW 715 mW 275 mW JG-8 1050 mW 8.4 mW/C 672 mW 546 mW 210 mW N-14 1150 mW 9.2 mW/C 736 mW 598 mW 230 mW P-8 1000 mW 8.0 mW/C 640 mW 520 mW 200 mW PW-8 525 mW 4.2 mW/C 336 mW -- -- recommended operating conditions Supply voltage, VCC Common mode input voltage, Common-mode voltage VIC VCC = 5 V VCC = 15 V Operating free-air temperature, TA 8 POST OFFICE BOX 655303 C SUFFIX I SUFFIX M SUFFIX MIN MAX MIN MAX MIN MAX 2 20 2 20 2 20 0 3.5 0 3.2 0 3.2 -15 13.5 -15 13.2 -15 13.2 0 70 -40 85 -55 125 * DALLAS, TEXAS 75265 UNIT V V C TLE2021 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TLE2021C MIN 25C RS = 50 120 600 TYP MAX 100 300 MIN TYP MAX 80 200 600 300 UNIT V V 2 2 V/C 25C 0.005 0.005 0.005 V/mo 25C 0.2 25 Full range 0 to 3.5 Full range 0 to 3.5 25C Full range 4 - 0.3 to 4 25C AVD Large signal differential Large-signal voltage amplification VO = 1.4 V to 4 V, RL = 10 k 25C 0.3 Full range 0.3 CMRR Common mode rejection ratio Common-mode VIC = VICRmin, RS = 50 25C 85 Full range 80 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 5 V to 30 V 25C 105 Full range 100 ICC Supply current - 0.3 to 4 4 0.8 4.3 4 0.8 1.5 105 200 300 1.5 85 120 105 110 dB 120 dB 100 200 300 200 300 5 300 300 5 V V/ V V/V 80 300 5 0.8 0.3 110 nA V 0.85 0.3 100 Full range 0.7 nA V 4.3 0.85 80 120 - 0.3 to 4 3.9 0.7 85 70 90 0 to 3.5 0.3 110 25 0 to 3.5 0.85 0.3 6 10 70 3.9 1.5 0.2 90 0 to 3.5 4.3 Full range Full range 25 0 to 3.5 0.7 Low level output voltage Low-level 6 10 70 3.9 VOL 25C 0.2 90 25C RS = 50 6 10 25C VO = 2.5 2 5 V, V No load MIN TLE2021BC 2 Full range High level output voltage High-level Supply-current change over operating temperature range MAX 850 Full range RL= 10 k ICC TYP Full range VIC = 0, TLE2021AC A A A Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 9 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOH Common mode input voltage range Common-mode TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR VOM+ Common mode input voltage range Common-mode Maximum positive peak output voltage swing TEST CONDITIONS TA TLE2021C MIN 25C Full range 500 RS = 50 200 TYP MAX 40 100 500 200 UNIT V V V/C 25C 0.006 0.006 0.006 V/mo 25C 0.2 25 -15 to 13.5 Full range -15 to 13.5 25C 14 Full range 13.9 25C -13.7 Full range -13.7 AVD Large signal differential Large-signal voltage amplification VO = 10 V, RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICR min, RS = 50 25C 100 Full range 96 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 2.5 V to 15 V 25C 105 Full range 100 ICC Supply current 25C 1 Full range 1 25C 6 25 70 -15.3 to 14 14 -13.7 14.3 1 100 -14.1 -13.7 6.5 1 105 100 120 105 350 6 -14.1 V 6.5 V/ V V/V 115 dB 120 dB 100 240 350 350 240 350 6 350 350 6 nA V 96 100 240 14.3 1 115 nA V -13.7 96 120 -15.3 to 14 13.9 1 115 90 14 -13.7 6.5 70 -15 to 13.5 13.9 -14.1 25 -15 to 13.5 -15 to 13.5 6 10 90 -15 to 13.5 14.3 0.2 10 70 -15.3 to 14 Full range Full range 0.2 90 25C RS = 50 6 10 Full range No load 80 MIN 2 25C VO = 0 0, MAX 2 Full range RL = 10 k TLE2021BC TYP 2 Maximum negative peak output voltage swing Supply-current change over operating temperature range 120 MIN 750 VOM - ICC MAX Full range VIC = 0, TLE2021AC TYP A A A Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 10 TLE2021 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2022 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, RS = 50 CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply-voltage Supply voltage rejection ratio (VCC /VIO) VCC = 5 V to 30 V ICC Supply current V V 2 2 V/C V/C 25C 0 005 0.005 0 005 0.005 0 005 0.005 V/mo V/mo 25C 0.5 35 0.4 70 Full range 0 to 3.5 4 -0.3 to 4 33 -0.3 to 4 4 0.8 0.3 0.3 25C 85 Full range 80 25C 100 Full range 95 1.5 4.3 4 0.8 87 1.5 103 Full range 600 118 105 450 600 105 dB 120 450 600 7 dB 600 600 7 V V/ V V/V 100 600 7 1.5 85 98 450 0.8 0.85 90 nA V 0.5 102 nA V 4.3 0.7 0.5 82 115 -0.3 to 4 0.85 0.4 100 90 3.9 0.7 0.4 70 0 to 3.5 0.85 25C 30 0 to 3.5 3.9 0.7 6 10 70 0 to 3.5 4.3 0.3 90 0 to 3.5 3.9 Full range 6 10 90 0 to 3.5 Full range 6 10 25C 25 C 25C No load UNIT 2 Full range VO = 2.5 2 5 V, V MAX 400 25C RL = 10 k TYP 250 25C VO = 1.4 1 4 V to 4 V V, MIN 550 Full range Large signal differential Large-signal voltage amplification TLE2022BC MAX 400 RS = 50 AVD TYP 800 25C Low level output voltage Low-level MIN 600 Full range VOL TLE2022AC MAX 25C Full range High level output voltage High-level Supply current change over operating temperature range TYP Full range Full range RL = 10 k ICC TLE2022C MIN A A A Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 11 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOH Common mode input Common-mode voltage range TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TLE2022C MIN 25C VIC = 0 0, RS = 50 MAX 150 500 VO = 10 V, V RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply-voltage Supply voltage rejection ratio (VCC /VIO) 5 V to 15 V 2.5 VCC = 2 ICC Supply current No load MAX 70 150 450 300 UNIT V V 0 006 0.006 0 006 0.006 0 006 0.006 V/mo V/mo 25C 0.5 35 0.4 70 Full range -15 to 13.5 14 Full range 13.9 25C -13.7 Full range -13.7 25C 0.8 Full range 0.8 25C 95 Full range 91 25C 100 Full range 95 -15.3 to 14 6 33 70 -15.3 to 14 14 -13.7 14.3 1 97 -14.1 -13.7 7 1.5 103 100 118 105 550 700 9 -14.1 V 10 V/ V V/V 112 dB 120 dB 100 550 700 700 550 700 9 700 700 9 nA V 96 98 Full range 14.3 1.5 109 nA V -13.7 93 115 -15.3 to 14 13.9 1 106 90 14 -13.7 4 70 -15 to 13.5 13.9 -14.1 30 -15 to 13.5 -15 to 13.5 6 10 90 -15 to 13.5 14.3 0.3 10 90 -15 to 13.5 Full range 6 10 25C 25 C 25C VO = 0, 0 300 TYP 25C 25C Large signal differential Large-signal voltage amplification 120 MIN V/C V/C RS = 50 AVD MAX 2 Full range RL = 10 k TLE2022BC TYP 2 25C Maximum negative peak output voltage swing MIN 2 Full range VOM - TLE2022AC TYP 700 Full range Maximum positive peak output voltage swing Supply current change over operating temperature range TA Full range VOM + ICC Common mode input Common-mode voltage range TEST CONDITIONS A A A Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 12 TLE2022 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2024 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0, RS = 50 TYP VO = 1.4 1 4 V to 4 V V, RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 5 V to 30 V ICC Supply current TYP MAX 600 800 UNIT V V 2 2 2 V/C 25C 0.005 0.005 0.005 V/mo 25C 0.6 45 0.5 70 Full range 0 to 3.5 25C 3.9 Full range 3.7 -0.3 to 4 40 -0.3 to 4 3.9 Full range 0.1 25C 80 Full range 80 25C 98 Full range 93 1.5 4.2 4 82 0.8 1.5 100 Full range 1200 115 103 800 1200 95 dB 117 800 1200 15 dB 1200 1200 15 V V/ V V/V 98 1200 15 1.5 85 95 800 0.8 0.95 85 nA V 0.1 92 nA V 4.3 0.7 0.4 82 112 -0.3 to 4 0.95 0.1 90 90 3.8 0.7 0.3 70 0 to 3.5 0.95 0.2 35 0 to 3.5 3.7 0.8 6 10 90 0 to 3.5 4.2 0.4 70 0 to 3.5 0.7 25C 6 10 90 0 to 3.5 Full range 6 10 25C 25C No load MIN 850 Full range VO = 2.5 2 5 V, V MAX 1050 25C Large signal differential Large-signal voltage amplification TYP 1100 RS = 50 AVD MIN 1300 Full range Low level output voltage Low-level MAX TLE2024BC 25C 25C VOL TLE2024AC Full range Full range High level output voltage High-level Supply current change over operating temperature range MIN Full range RL = 10 k ICC TLE2024C A A A Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 13 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOH Common mode input voltage Common-mode range TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR VOM + Common mode input voltage Common-mode range Maximum positive peak output voltage swing TEST CONDITIONS VIC = 0, RS = 50 TYP VO = 10 V V, RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) 2.5 5 V to 15 V VCC = 2 ICC Supply current No load MIN TYP MAX 750 500 950 700 UNIT V V 2 2 2 V/C 25C 0.006 0.006 0.006 V/mo 25C 0.6 50 0.5 70 Full range -15 to 13.5 25C 13.8 Full range 13.7 25C -13.7 Full range -13.6 25C 0.4 Full range 0.4 25C 92 Full range 88 25C 98 Full range 93 -15.3 to 14 6 45 70 -15.3 to 14 13.9 -13.7 14.2 0.8 14 -14.1 -13.7 94 4 1 105 97 100 1050 Full range 1400 115 103 1050 1400 -14.1 V 7 V/ V V/V 108 dB 117 1050 1400 20 dB 1400 1400 20 nA V 98 1400 20 14.3 93 95 nA V 1 90 112 -15.3 to 14 -13.6 0.8 102 90 13.9 -13.6 2 70 -15 to 13.5 13.8 -14.1 40 -15 to 13.5 -15 to 13.5 6 10 90 -15 to 13.5 14.1 0.4 10 90 -15 to 13.5 Full range 6 10 25C 25C VO = 0, 0 TLE2024BC MAX 1200 RS = 50 Large signal differential Large-signal voltage amplification TYP 1000 Full range AVD MIN 25C 25C RL = 10 k TLE2024AC MAX Full range Full range Maximum negative peak output voltage swing Supply current change over operating temperature range TLE2024C MIN Full range VOM - ICC TA A A A Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 14 TLE2024 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2021 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TLE2021I MIN 25C MAX 120 600 Full range RS = 50 Large signal differential Large-signal voltage amplification VO = 1.4 V to 4 V, RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICR min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 5 V to 30 V ICC Supply current ICC Supply-current change over operating temperature range 80 200 600 300 UNIT V V 0.005 0.005 0.005 V/mo 25C 0.2 25 0 to 3.5 Full range 0 to 3.2 4 -0.3 to 4 0 to 3.5 4.3 0.3 0.25 -0.3 to 4 4 0.8 25C 85 Full range 80 25C 105 Full range 100 4.3 4 0.8 1.5 105 200 300 110 1.5 85 120 105 110 dB 120 dB 100 200 300 200 300 6 300 300 6 V V/ V V/V 80 300 6 0.8 0.9 0.3 nA V 0.25 100 Full range 4.3 0.7 nA V 3.9 80 120 - 0.3 to 4 0.9 85 70 90 0 to 3.5 0.25 110 25 0 to 3.2 0.7 0.3 6 10 70 3.9 1.5 0.2 90 0.9 25C Full range 25 0 to 3.2 0.7 Full range 6 10 70 3.9 25C 25C 0.2 90 25C Full range 6 10 Full range VO = 2.5 V,, No load MAX 25C 25C AVD 300 TYP V/C RS = 50 Low level output voltage Low-level 100 MIN 2 25C VOL MAX 2 Full range RL = 10 k TLE2021BI TYP 2 Full range High level output voltage High-level MIN 950 Full range VIC = 0, TLE2021AI TYP A A A Full range is - 40C to 85C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 15 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOH Common mode input voltage range Common-mode TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR VOM + Common-mode Common mode input voltage range Maximum positive peak output voltage swing TEST CONDITIONS TA TLE2021I MIN 25C Full range 500 RS = 50 80 200 MIN TYP MAX 40 100 500 200 UNIT V V 2 V/C 25C 0.006 0.006 0.006 V/mo 25C 0.2 25C 25 -15 to 13.5 Full range -15 to 13.2 25C 14 Full range 13.9 25C -13.7 Full range -13.6 AVD Large signal differential Large-signal voltage amplification VO = 10 V, RL = 10 k Full range 0.75 CMRR Common mode rejection ratio Common-mode VIC = VICR min, RS = 50 25C 100 Full range 96 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 2. 5 V to 15 V 25C 105 Full range 100 ICC Supply current 25C 25C 1 6 25 70 -15.3 to 14 14 -13.7 14.3 1 14 -14.1 -13.7 100 6.5 1 115 100 105 240 350 120 105 240 350 -14.1 V 6.5 V/ V V/V 115 dB 120 240 350 7 dB 350 350 7 nA V 100 350 7 14.3 96 100 nA V 0.75 96 120 -15.3 to 14 -13.6 0.75 115 90 13.9 -13.6 6.5 70 -15 to 13.2 13.9 -14.1 25 -15 to 13.5 -15 to 13.2 6 10 90 -15 to 13.5 14.3 0.2 10 70 -15.3 to 14 Full range Full range 0.2 90 25C RS = 50 6 10 Full range VO = 0 V V, No load MAX 2 Full range RL = 10 k TLE2021BI TYP 2 Maximum negative peak output voltage swing Supply-current change over operating temperature range 120 MIN 850 VOM - ICC MAX Full range VIC = 0, TLE2021AI TYP A A A Full range is - 40C to 85C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 16 TLE2021 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2022 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, RS = 50 CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply-voltage Supply voltage rejection ratio (VCC /VIO) VCC = 5 V to 30 V ICC Supply current V V 2 2 V/C V/C 25C 0 005 0.005 0 005 0.005 0 005 0.005 V/mo V/mo 25C 0.5 35 0.4 70 Full range 0 to 3.2 4 -0.3 to 4 33 -0.3 to 4 4 0.8 0.3 0.2 25C 85 Full range 80 25C 100 Full range 95 1.5 4.3 4 0.8 87 1.5 103 Full range 600 118 105 450 600 105 dB 120 450 600 15 dB 600 600 15 V V/ V V/V 100 600 15 1.5 85 98 450 0.8 0.9 90 nA V 0.2 102 nA V 4.3 0.7 0.5 82 115 -0.3 to 4 0.9 0.2 100 90 3.9 0.7 0.4 70 0 to 3.2 0.9 25C 30 0 to 3.5 3.9 0.7 6 10 70 0 to 3.2 4.3 0.3 90 0 to 3.5 3.9 Full range 6 10 90 0 to 3.5 Full range 6 10 25C 25 C 25C No load UNIT 2 Full range VO = 2.5 2 5 V, V MAX 400 25C RL = 10 k TYP 250 25C VO = 1.4 1 4 V to 4 V V, MIN 550 Full range Large signal differential Large-signal voltage amplification TLE2022BI MAX 400 RS = 50 AVD TYP 800 25C Low level output voltage Low-level MIN 600 Full range VOL TLE2022AI MAX 25C Full range High level output voltage High-level Supply current change over operating temperature range TYP Full range Full range RL = 10 k ICC TLE2022I MIN A A A Full range is - 40C to 85C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 17 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOH Common mode input Common-mode voltage range TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TLE2022I MIN 25C VIC = 0 0, RS = 50 MAX 150 500 VO = 10 V, V RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply-voltage Supply voltage rejection ratio (VCC /VIO) VCC = 2 5 V to 15 V 2.5 ICC Supply current 70 150 450 300 UNIT V V 0 006 0.006 0 006 0.006 V/mo V/mo 25C 0.5 35 0.4 70 33 Full range - 15 to 13.2 14 14 13.9 25C - 13.7 Full range - 13.6 25C 0.8 Full range 0.8 25C 95 Full range 91 25C 100 Full range 95 - 13.7 14.3 1 97 - 14.1 - 13.7 7 1.5 103 100 118 105 550 700 30 - 14.1 V 10 V/ V V/V 112 dB 120 dB 100 550 700 700 550 700 30 700 700 30 nA V 96 98 Full range 14.3 1.5 109 nA V - 13.6 93 115 -15.3 to 14 13.9 1 106 90 14 - 13.6 4 70 - 15 to 13.2 13.9 - 14.1 30 - 15 to 13.5 -15.3 to 14 6 10 70 - 15 to 13.2 14.3 0.3 90 - 15 to 13.5 -15.3 to 14 6 10 90 - 15 to 13.5 Full range 6 10 25C 25 C Full range No load MAX 0 006 0.006 25C VO = 0, 0 300 TYP 25C 25C Large signal differential Large-signal voltage amplification 120 MIN V/C V/C RS = 50 AVD MAX 2 Full range RL = 10 k TLE2022BI TYP 2 25C Maximum negative peak output voltage swing MIN 2 Full range VOM - TLE2022AI TYP 700 Full range Maximum positive peak output voltage swing Supply current change over operating temperature range TA Full range VOM + ICC Common mode input Common-mode voltage range TEST CONDITIONS A A A Full range is - 40C to 85C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 18 TLE2022 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2024 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current Maximum positive peak output voltage swing VIC = 0, RS = 50 TYP RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 2 2.5 5 V to 15 V ICC Supply current TYP MAX 600 800 UNIT V V 2 2 2 V/C 25C 0.005 0.005 0.005 V/mo 25C 0.6 45 0.5 70 Full range 0 to 3.2 25C 3.9 Full range 3.7 -0.3 to 4 40 -0.3 to 4 3.9 Full range 0.1 25C 80 Full range 80 25C 98 Full range 93 1.5 4.2 4 82 0.8 1.5 100 Full range 1200 115 103 800 1200 95 dB 117 800 1200 30 dB 1200 1200 30 V V/ V V/V 98 1200 30 1.5 85 95 800 0.8 0.95 85 nA V 0.1 92 nA V 4.3 0.7 0.4 82 112 -0.3 to 4 0.95 0.1 90 90 3.8 0.7 0.3 70 0 to 3.2 0.95 0.2 35 0 to 3.5 3.7 0.8 6 10 90 0 to 3.5 4.2 0.4 70 0 to 3.2 0.7 25C 6 10 90 0 to 3.5 Full range 6 10 25C 25C No load MIN 850 Full range VO = 0, 0 MAX 1050 25C VO = 1.4 1 4 V to 4 V V, TYP 1100 RS = 50 Large signal differential Large-signal voltage amplification MIN 1300 Full range AVD MAX TLE2024BI 25C 25C RL = 10 k TLE2024AI Full range Full range Maximum negative peak output voltage swing Supply current change over operating temperature range MIN Full range VOM - ICC TLE2024I A A A Full range is - 40C to 85C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 19 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOM + Common mode input voltage Common-mode range TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR VOM + Common mode input voltage Common-mode range Maximum positive peak output voltage swing TEST CONDITIONS VIC = 0, RS = 50 TYP VO = 10 V V, RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) 2.5 5 V to 15 V VCC = 2 ICC Supply current No load MIN TYP MAX 750 500 950 700 UNIT V V 2 2 2 V/C 25C 0.006 0.006 0.006 V/mo 25C 0.6 50 0.5 70 Full range -15 to 13.2 25C 13.8 Full range 13.7 25C -13.7 Full range -13.6 25C 0.4 Full range 0.4 25C 92 Full range 88 25C 98 Full range 93 -15.3 to 14 6 45 70 -15.3 to 14 13.9 -13.7 14.2 0.8 14 -14.1 -13.7 94 4 1 105 97 100 1050 Full range 1400 115 103 1050 1400 -14.1 V 7 V/ V V/V 108 dB 117 1050 1400 50 dB 1400 1400 50 nA V 98 1400 50 14.3 93 95 nA V 1 90 112 -15.3 to 14 -13.6 0.8 102 90 13.8 -13.6 2 70 -15 to 13.2 13.7 -14.1 40 -15 to 13.5 -15 to 13.2 6 10 90 -15 to 13.5 14.1 0.4 10 90 -15 to 13.5 Full range 6 10 25C 25C VO = 0, 0 TLE2024BI MAX 1200 RS = 50 Large signal differential Large-signal voltage amplification TYP 1000 Full range AVD MIN 25C 25C RL = 10 k TLE2024AI MAX Full range Full range Maximum negative peak output voltage swing Supply current change over operating temperature range TLE2024I MIN Full range VOM - ICC TA A A A Full range is - 40C to 85C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 20 TLE2024 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2021 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current Common mode input Common-mode voltage range 25C TYP 120 VIC = 0, RS = 50 RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 5 V to 30 V ICC Supply current V/mo 25C 0.2 25 Full range 0 to 3.2 4 -0.3 to 4 25 90 0 to 3.5 -0.3 to 4 4.3 4 0.7 0.3 0.1 25C 85 Full range 80 25C 105 Full range 100 1.5 0.8 0.95 0.3 1.5 85 110 dB 80 120 105 120 dB 100 170 Full range 230 170 230 9 230 230 9 V V/ V V/V 0.1 110 nA V 3.8 0.8 nA V 4.3 0.95 25C 70 0 to 3.2 0.7 Full range 6 10 70 3.8 25C Full range 0.2 90 0 to 3.5 25C 6 10 25C Full range No load V V 0.005 Full range VO = 2.5 2 5 V, V 300 A A A Full range is - 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 21 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS 1 4 V to 4 V V, VO = 1.4 200 0.005 25C Large-signal Large signal differential voltage amplification 80 UNIT 25C RS = 50 AVD MAX V/C Full range RL = 10 k 600 TYP 2 25C Low level output voltage Low-level MIN 2 Full range VOL TLE2021BM MAX 1100 Full range High level output voltage High-level Supply current change over operating temperature range TLE2021M MIN Full range VOH ICC TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR Common mode input Common-mode voltage range TEST CONDITIONS 25C TYP 120 VIC = 0, RS = 50 VO = 10 V, V RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 2 2.5 5 V to 15 V ICC Supply current No load 200 V V 0.006 V/mo 25C 0.2 25 Full range -15 to 13.2 14 Full range 13.8 25C -13.7 Full range -13.6 1 Full range 0.5 25C 100 Full range 96 25C 105 Full range 100 6 10 70 -15.3 to 14 25 70 90 -15 to 13.5 -15.3 to 14 14.3 14 14.3 -13.7 -14.1 V -13.6 6.5 1 6.5 V/ V V/V 0.5 115 100 115 dB 96 120 105 120 dB 100 200 300 200 300 10 300 300 10 nA V 13.8 -14.1 nA V -15 to 13.2 Full range Full range 0.2 90 -15 to 13.5 25C 6 10 25C 25C VO = 0, 0 100 0.006 25C Large-signal Large signal differential voltage amplification 40 UNIT 25C RS = 50 AVD MAX V/C Full range RL = 10 k 500 TYP 2 25C Maximum negative peak output voltage swing MIN 2 Full range VOM - TLE2021BM MAX 1000 Full range Maximum positive peak output voltage swing Supply current change over operating temperature range TLE2021M MIN Full range VOM + ICC TA A A A Full range is - 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 22 TLE2021 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2022 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, RS = 50 CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply-voltage Supply voltage rejection ratio (VCC /VIO) VCC = 5 V to 30 V ICC Supply current V V 2 2 V/C V/C 25C 0 005 0.005 0 005 0.005 0 005 0.005 V/mo V/mo 25C 0.5 35 0.4 70 Full range 0 to 3.2 4 -0.3 to 4 33 -0.3 to 4 4 0.8 0.3 0.1 25C 85 Full range 80 25C 100 Full range 95 1.5 4.3 4 0.8 87 1.5 103 Full range 600 118 105 450 600 105 dB 120 450 600 37 dB 600 600 37 V V/ V V/V 100 600 37 1.5 85 98 450 0.8 0.95 90 nA V 0.1 102 nA V 4.3 0.7 0.5 82 115 -0.3 to 4 0.95 0.1 100 90 3.8 0.7 0.4 70 0 to 3.2 0.95 25C 30 0 to 3.5 3.8 0.7 6 10 70 0 to 3.2 4.3 0.3 90 0 to 3.5 3.8 Full range 6 10 90 0 to 3.5 Full range 6 10 25C 25 C 25C No load UNIT 2 Full range VO = 2 2.5 5V V, MAX 400 25C RL = 10 k TYP 250 25C VO = 1.4 1 4 V to 4 V V, MIN 550 Full range Large signal differential Large-signal voltage amplification TLE2022BM MAX 400 RS = 50 AVD TYP 800 25C Low level output voltage Low-level MIN 600 Full range VOL TLE2022AM MAX 25C Full range High level output voltage High-level Supply current change over operating temperature range TYP Full range Full range RL = 10 k ICC TLE2022M MIN A A A Full range is - 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 23 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOH Common mode input Common-mode voltage range TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TLE2022M MIN 25C VIC = 0 0, RS = 50 MAX 150 500 VO = 10 V, V RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply-voltage Supply voltage rejection ratio (VCC /VIO) VCC = 2 5 V to 15 V 2.5 ICC Supply current No load MAX 70 150 450 300 UNIT V V 0 006 0.006 0 006 0.006 0 006 0.006 V/mo V/mo 25C 0.5 35 0.4 70 33 Full range -15 to 13.2 14 Full range 13.9 25C -13.7 Full range -13.6 25C 0.8 Full range 0.8 25C 95 Full range 91 25C 100 Full range 95 14 -13.7 14.3 1 97 -14.1 -13.7 7 1.5 103 100 118 105 550 700 60 -14.1 V 10 V/ V V/V 112 dB 120 dB 100 550 700 700 550 700 60 700 700 60 nA V 96 98 Full range 14.3 1.5 109 nA V -13.6 93 115 -15.3 to 14 13.9 1 106 90 14 -13.6 4 70 -15 to 13.2 13.9 -14.1 30 -15 to 13.5 -15.3 to 14 6 10 70 -15 to 13.2 14.3 0.3 90 -15 to 13.5 -15.3 to 14 6 10 90 -15 to 13.5 Full range 6 10 25C 25 C 25C VO = 0, 0 300 TYP 25C 25C Large signal differential Large-signal voltage amplification 120 MIN V/C V/C RS = 50 AVD MAX 2 Full range RL = 10 k TLE2022BM TYP 2 25C Maximum negative peak output voltage swing MIN 2 Full range VOM - TLE2022AM TYP 700 Full range Maximum positive peak output voltage swing Supply current change over operating temperature range TA Full range VOM + ICC Common mode input Common-mode voltage range TEST CONDITIONS A A A Full range is -55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 24 TLE2022 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2024 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current Maximum positive peak output voltage swing VIC = 0, RS = 50 TYP RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) VCC = 2 2.5 5 V to 15 V ICC Supply current TYP MAX 600 800 UNIT V V 2 2 2 V/C 25C 0.005 0.005 0.005 V/mo 25C 0.6 45 0.5 70 Full range 0 to 3.2 25C 3.9 Full range 3.7 -0.3 to 4 40 -0.3 to 4 3.9 Full range 0.1 25C 80 Full range 80 25C 98 Full range 93 1.5 4.2 4 82 0.8 1.5 100 Full range 1200 115 103 800 1200 95 dB 117 800 1200 50 dB 1200 1200 50 V V/ V V/V 98 1200 50 1.5 85 95 800 0.8 0.95 85 nA V 0.1 92 nA V 4.3 0.7 0.4 82 112 -0.3 to 4 0.95 0.1 90 90 3.8 0.7 0.3 70 0 to 3.2 0.95 0.2 35 0 to 3.5 3.7 0.8 6 10 90 0 to 3.5 4.2 0.4 70 0 to 3.2 0.7 25C 6 10 90 0 to 3.5 Full range 6 10 25C 25C No load MIN 850 Full range VO = 0, 0 MAX 1050 25C VO = 1.4 1 4 V to 4 V V, TYP 1100 RS = 50 Large signal differential Large-signal voltage amplification MIN 1300 Full range AVD MAX TLE2024BM 25C 25C RL = 10 k TLE2024AM Full range Full range Maximum negative peak output voltage swing Supply current change over operating temperature range MIN Full range VOM - ICC TLE2024M A A A Full range is - 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 25 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS VOM + Common mode input voltage Common-mode range TA SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR TEST CONDITIONS VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VICR VOM + Common mode input voltage Common-mode range Maximum positive peak output voltage swing TEST CONDITIONS VIC = 0, RS = 50 TYP VO = 10 V V, RL = 10 k CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 kSVR Supply voltage rejection ratio Supply-voltage (VCC /VIO) 2.5 5 V to 15 V VCC = 2 ICC Supply current No load MIN TYP MAX 750 500 950 700 UNIT V V 2 2 2 V/C 25C 0.006 0.006 0.006 V/mo 25C 0.6 50 0.5 70 Full range -15 to 13.2 25C 13.8 Full range 13.7 25C -13.7 Full range -13.6 25C 0.4 Full range 0.4 25C 92 Full range 88 25C 98 Full range 93 -15.3 to 14 6 45 70 -15.3 to 14 13.9 -13.7 14.2 0.8 14 -14.1 -13.7 94 4 1 105 97 100 1050 Full range 1400 115 103 1050 1400 -14.1 V 7 V/ V V/V 108 dB 117 1050 1400 85 dB 1400 1400 85 nA V 98 1400 85 14.3 93 95 nA V 1 90 112 -15.3 to 14 -13.6 0.8 102 90 13.8 -13.6 2 70 -15 to 13.2 13.7 -14.1 40 -15 to 13.5 -15 to 13.2 6 10 90 -15 to 13.5 14.1 0.4 10 90 -15 to 13.5 Full range 6 10 25C 25C VO = 0, 0 TLE2024BM MAX 1200 RS = 50 Large signal differential Large-signal voltage amplification TYP 1000 Full range AVD MIN 25C 25C RL = 10 k TLE2024AM MAX Full range Full range Maximum negative peak output voltage swing Supply current change over operating temperature range TLE2024M MIN Full range VOM - ICC TA A A A Full range is - 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 26 TLE2024 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE2021 operating characteristics, VCC = 5 V, TA = 25C PARAMETER SR TEST CONDITIONS See Figure 1 TA C SUFFIX MIN TYP I SUFFIX MAX MIN TYP M SUFFIX MAX MIN TYP 0.5 MAX 0.5 UNIT Slew rate at unity gain VO = 1 V to 3 V, 25C 0.5 Vn Equivalent input noise voltage (see Figure 2) f = 10 Hz 25C 21 50 21 50 21 V/s f = 1 kHz 25C 17 30 17 30 17 VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage f = 0.1 to 1 Hz 25C 0.16 0.16 0.16 f = 0.1 to 10 Hz 25C 0.47 0.47 0.47 In Equivalent input noise current 25C 0.09 0.09 0.9 pA/Hz B1 Unity-gain bandwidth See Figure 3 25C 1.2 1.2 1.2 MHz m Phase margin at unity gain See Figure 3 25C 42 42 42 nV/Hz V V PARAMETER See Figure 1 TA C SUFFIX MIN TYP 25C 0.45 0.65 Full range 0.45 I SUFFIX MAX MIN TYP 0.45 0.65 M SUFFIX MAX MIN TYP 0.45 0.65 SR Slew rate at unity gain VO = 1V to 3 V, V Vn Equivalent input noise voltage (see Figure 2) f = 10 Hz 25C 19 50 19 50 19 f = 1 kHz 25C 15 30 15 30 15 VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage f = 0.1 to 1 Hz 25C 0.16 0.16 0.16 f = 0.1 to 10 Hz 25C 0.47 0.47 0.47 In Equivalent input noise current 25C 0.09 0.09 0.09 B1 Unity-gain bandwidth See Figure 3 25C 2 2 2 m Phase margin at unity gain See Figure 3 25C 46 46 46 0.42 0.45 Full range is 0C to 70C for the C-suffix devices, - 40C to 85C for the I-suffix devices, and - 55C to 125C for the M-suffix devices. MAX UNIT V/ s V/s nV/Hz V V pA/Hz MHz 27 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS TEST CONDITIONS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE2021 operating characteristics at specified free-air temperature, VCC = 15 V SR TEST CONDITIONS C SUFFIX MIN See Figure 1 TYP I SUFFIX MAX MIN 0.5 TYP M SUFFIX MAX MIN 0.5 TYP Slew rate at unity gain VO = 1 V to 3 V, Vn Equivalent input noise voltage (see Figure 2) f = 10 Hz 21 50 21 50 21 f = 1 kHz 17 30 17 30 17 VN(PP) Peak to peak equivalent input noise voltage Peak-to-peak In Equivalent input noise current B1 Unity-gain bandwidth See Figure 3 m Phase margin at unity gain See Figure 3 MAX 0.5 UNIT V/s nV/Hz f = 0.1 to 1 Hz 0.16 0.16 0.16 f = 0.1 to 10 Hz 0.47 0.47 0.47 0.1 0.1 0.1 pA/Hz 1.7 1.7 1.7 MHz 47 47 47 V V TLE2022 operating characteristics at specified free-air temperature, VCC = 15 V POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PARAMETER TEST CONDITIONS See Figure 1 C SUFFIX TA MIN TYP 25C 0.45 0.65 Full range 0.45 I SUFFIX MAX MIN TYP 0.45 0.65 M SUFFIX MAX MIN TYP 0.45 0.65 MAX UNIT SR Slew rate at unity gain VO = 10 V, V Vn Equivalent input noise voltage (see Figure 2) f = 10 Hz 25C 19 50 19 50 19 f = 1 kHz 25C 15 30 15 30 15 VN(PP) Peak to peak equivalent Peak-to-peak input noise voltage f = 0.1 to 1 Hz 25C 0.16 0.16 0.16 f = 0.1 to 10 Hz 25C 0.47 0.47 0.47 In Equivalent input noise current 25C 0.1 0.1 0.1 pA/Hz B1 Unity-gain bandwidth See Figure 3 25C 2.8 2.8 2.8 MHz m Phase margin at unity gain See Figure 3 25C 52 52 52 0.42 0.4 Full range is 0C to 70C for the C-suffix devices, -40C to 85C for the I suffix devices and -55C to 125C for the I-suffix devices. V/ s V/s nV/Hz V V TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS PARAMETER SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 28 TLE2022 operating characteristics, VCC = 5 V, TA = 25C TLE2024 operating characteristics, VCC = 5 V, TA = 25C PARAMETER SR TEST CONDITIONS Slew rate at unity gain VO = 1 V to 3 V, C SUFFIX MIN See Figure 1 TYP I SUFFIX MAX MIN 0.5 TYP M SUFFIX MAX MIN 0.5 TYP 0.5 f = 10 Hz 21 50 21 50 21 f = 1 kHz 17 30 17 30 17 Vn Equivalent input noise voltage (see Figure 2) VN(PP) Peak to peak equivalent input noise voltage Peak-to-peak In Equivalent input noise current B1 Unity-gain bandwidth See Figure 3 m Phase margin at unity gain See Figure 3 MAX UNIT V/s nV/ Hz f = 0.1 to 1 Hz 0.16 0.16 0.16 f = 0.1 to 10 Hz 0.47 0.47 0.47 0.1 0.1 0.1 pA/Hz 1.7 1.7 1.7 MHz 47 47 47 V V PARAMETER See Figure 1 C SUFFIX TA MIN TYP 25C 0.45 0.7 Full range 0.45 I SUFFIX MAX MIN TYP 0.45 0.7 M SUFFIX MAX MIN TYP 0.45 0.7 MAX UNIT SR Slew rate at unity gain VO = 10 V V, Vn Equivalent input noise voltage (see Figure 2) f = 10 Hz 25C 19 50 19 50 19 f = 1 kHz 25C 15 30 15 30 15 VN(PP) Peak to peak equivalent input noise Peak-to-peak voltage f = 0.1 to 1 Hz 25C 0.16 0.16 0.16 f = 0.1 to 10 Hz 25C 0.47 0.47 0.47 In Equivalent input noise current 25C 0.1 0.1 0.1 pA/Hz B1 Unity-gain bandwidth See Figure 3 25C 2.8 2.8 2.8 MHz m Phase margin at unity gain See Figure 3 25C 52 52 52 0.42 0.4 Full range is 0C to 70C for the C-suffix devices, -40C to 85C for the I suffix devices and -55C to 125C for the I-suffix devices. V/ s V/s nV/Hz V V 29 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS TEST CONDITIONS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE2024 operating characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2021Y electrical characteristics at VCC = 5 V, TA = 25C (unless otherwise noted) PARAMETER VIO TEST CONDITIONS TLE2021Y MIN Input offset voltage Input offset current IIB Input bias current MAX 150 Input offset voltage long-term drift (see Note 4) IIO TYP VIC = 0 0, V 0.005 RS = 50 RS = 50 UNIT V/mo 0.5 nA 35 nA - 0.3 to 4 V 4.3 V 0.7 V VICR Common-mode input voltage range VOH Maximum high-level output voltage VOL Maximum low-level output voltage AVD Large-signal differential voltage amplification VO = 1.4 to 4 V, RL = 10 k 1.5 V/V CMRR Common-mode rejection ratio VIC = VICR min, RS = 50 100 dB kSVR Supply-voltage rejection ratio (VCC /VIO) VCC = 5 V to 30 V 115 dB ICC Supply current VO = 2.5 V, 400 A RL = 10 k No load NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE2021Y operating characteristics at VCC = 5 V, TA = 25C PARAMETER SR TEST CONDITIONS Slew rate at unity gain TLE2021Y MIN TYP VO = 1 V to 3 V 0.5 f = 10 Hz 21 f = 1 kHz 17 MAX UNIT V/s nV/Hz Vn Equivalent input noise voltage VN(PP) Peak to peak equivalent input noise voltage Peak-to-peak In Equivalent input noise current 0.1 pA/Hz B1 Unity-gain bandwidth 1.7 MHz m Phase margin at unity gain 47 30 POST OFFICE BOX 655303 f = 0.1 to 1 Hz 0.16 f = 0.1 to 10 Hz 0.47 * DALLAS, TEXAS 75265 V V TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2022Y electrical characteristics, VCC = 5 V, TA = 25C (unless otherwise noted) PARAMETER VIO TEST CONDITIONS TLE2022Y MIN Input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, TYP MAX 150 600 0.005 RS = 50 RS = 50 UNIT V V/mo 0.5 nA 35 nA - 0.3 to 4 V 4.3 V 0.7 V VICR Common-mode input voltage range VOH Maximum high-level output voltage VOL Maximum low-level output voltage AVD Large-signal differential voltage amplification VO = 1.4 to 4 V, RL= 10 k 1.5 V/V CMRR Common-mode rejection ratio VIC = VICR min, RS = 50 100 dB kSVR Supply-voltage rejection ratio (VCC /VIO) VCC = 5 V to 30 V 115 dB ICC Supply current VO = 2.5 V, No load 450 A RL = 10 k NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE2022Y operating characteristics, VCC = 5 V, TA = 25C PARAMETER SR TEST CONDITIONS Slew rate at unity gain VO = 1 V to 3 V, See Figure 1 TLE2022Y MIN TYP 0.5 f = 10 Hz 21 f = 1 kHz 17 MAX UNIT V/s Vn Equivalent input noise voltage (see Figure 2) VN(PP) Peak to peak equivalent input noise voltage Peak-to-peak In Equivalent input noise current 0.1 pA/Hz B1 Unity-gain bandwidth See Figure 3 1.7 MHz m Phase margin at unity gain See Figure 3 47 f = 0.1 to 1 Hz 0.16 f = 0.1 to 10 Hz 0.47 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 nV/H nV/Hz V V 31 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TLE2024Y electrical characteristics, VCC = 5 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS TLE2024Y MIN Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TYP MAX 0.005 VIC = 0, RS = 50 RS = 50 UNIT V/mo 0.6 nA 45 nA -0.3 to 4 V 4.2 V 0.7 V VICR Common-mode input voltage range VOH High-level output voltage VOL Low-level output voltage AVD Large-signal differential voltage amplification VO = 1.4 V to 4 V, RL = 10 k 1.5 V/V CMRR Common-mode rejection ratio VIC = VICRmin, RS = 50 90 dB kSVR Supply-voltage rejection ratio (VCC /VIO) VCC = 5 V to 30 V 112 dB ICC Supply current VO = 2.5 V, 800 A RL = 10 k No load NOTE 4. Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. TLE2024Y operating characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS TYP 0.5 MAX UNIT Slew rate at unity gain Vn Equivalent input noise voltage (see Figure 2) VN(PP) Peak to peak equivalent input noise voltage Peak-to-peak In Equivalent input noise current 0.1 pA/Hz B1 Unity-gain bandwidth See Figure 3 1.7 MHz m Phase margin at unity gain See Figure 3 47 POST OFFICE BOX 655303 See Figure 1 MIN SR 32 VO = 1 V to 3 V, TLE2024Y f = 10 Hz 21 f = 1 kHz 17 f = 0.1 to 1 Hz 0.16 f = 0.1 to 10 Hz 0.47 * DALLAS, TEXAS 75265 V/s nV/ Hz V V TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 PARAMETER MEASUREMENT INFORMATION 20 k 20 k 5V 15 V - VO VI + 30 pF (see Note A) VO + - VI -15 V 30 pF (see Note A) 20 k (a) SINGLE SUPPLY 20 k (b) SPLIT SUPPLY NOTE A: CL includes fixture capacitance. Figure 1. Slew-Rate Test Circuit 2 k 2 k 15 V 5V - 20 VO - VO + 2.5 V + 20 -15 V 20 20 (a) SINGLE SUPPLY (b) SPLIT SUPPLY Figure 2. Noise-Voltage Test Circuit VI 100 10 k 10 k 5V 15 V - VI VO 2.5 V - + + 30 pF (see Note A) VO 100 -15 V 30 pF (see Note A) 10 k (a) SINGLE SUPPLY 10 k (b) SPLIT SUPPLY NOTE A: CL includes fixture capacitance. Figure 3. Unity-Gain Bandwidth and Phase-Margin Test Circuit POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 33 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 PARAMETER MEASUREMENT INFORMATION 5V VO VI + 10 k VO + - 10 k - 0.1 F VI 15 V - 15 V 10 k 30 pF (see Note A) 30 pF (see Note A) (a) SINGLE SUPPLY 10 k (b) SPLIT SUPPLY NOTE A: CL includes fixture capacitance. Figure 4. Small-Signal Pulse-Response Test Circuit typical values Typical values presented in this data sheet represent the median (50% point) of device parametric performance. 34 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO Input offset voltage Distribution IIB Input bias current vs Common-mode input voltage vs Free-air temperature II Input current vs Differential input voltage VOM Maximum peak output voltage vs Output current vs Free-air temperature VOH High-level output voltage vs High-level output current vs Free-air temperature 19, 20 21 VOL Low-level output voltage vs Low-level output current vs Free-air temperature 22 23 VO(PP) Maximum peak-to-peak output voltage vs Frequency AVD Large-signal differential voltage amplification vs Frequency vs Free-air temperature 26 27, 28, 29 IOS Short-circuit output current vs Supply voltage vs Free-air temperature 30 - 33 34 - 37 ICC Supply current vs Supply voltage vs Free-air temperature 38, 39, 40 41, 42, 43 CMRR Common-mode rejection ratio vs Frequency 44, 45, 46 SR Slew rate vs Free-air temperature 47, 48, 49 Voltage-follower small-signal pulse response 5, 6, 7 8, 9, 10 11, 12, 13 14 15, 16, 17 18 24, 25 50, 51 Voltage-follower large-signal pulse response 52 - 57 VN(PP) Peak-to-peak equivalent input noise voltage 0.1 to 1 Hz 0.1 to 10 Hz Vn Equivalent input noise voltage vs Frequency B1 Unity-gain bandwidth vs Supply voltage vs Free-air temperature 61, 62 63, 64 m Phase margin vs Supply voltage vs Load capacitance vs Free-air temperature 65, 66 67, 68 69, 70 Phase shift vs Frequency POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 58 59 60 26 35 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLE2022 INPUT OFFSET VOLTAGE DISTRIBUTION OF TLE2021 INPUT OFFSET VOLTAGE 20 IIII TA = 25C 16 Percentage of Units - % Percentage of Units - % 398 Amplifiers Tested From 1 Wafer Lot VCC = 15 V TA = 25C P Package 16 IIIIIIIIIII 20 231 Units Tested From 1 Wafer Lot VCC = 15 V 12 8 4 P Package 12 8 4 0 -600 -450 -300 -150 150 300 450 0 VIO - Input Offset Voltage - V 0 -600 600 -400 Figure 5 12 600 Figure 6 DISTRIBUTION OF TLE2024 INPUT OFFSET VOLTAGE -40 796 Amplifiers Tested From 1 Wafer Lot VCC = 15 V TA = 25C N Package TLE2021 INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE VCC = 15 V TA = 25C -35 IIB I IB - Input Bias Current - nA Percentage of Units - % 16 -200 0 200 400 VIO - Input Offset Voltage - V 8 4 -30 -25 -20 -15 -10 -5 0 -1 -0.5 0 0.5 1 VIO - Input Offset Voltage - mV 0 -15 -10 -5 0 5 10 VIC - Common-Mode Input Voltage - V Figure 8 Figure 7 36 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE TLE2024 INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE -50 -60 VCC = 15 V TA = 25C TA = 25C IIIB IB - Input Bias Current - nA IIB I IB - Input Bias Current - nA -45 VCC = 15 V -40 -35 -30 -40 AA AA -25 -20 -15 -50 -10 -5 0 5 10 VIC - Common-Mode Input Voltage - V -30 -20 -15 15 -10 -5 -50 -35 VCC = 15 V VO = 0 VIC = 0 IIIB IB - Input Bias Current - nA IIB I IB - Input Bias Current - nA VCC = 15 V VO = 0 VIC = 0 -45 -25 -20 -15 -10 -40 -35 -30 -25 -5 -75 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C 125 -20 -75 -50 -25 0 25 50 75 100 125 TA - Free-Air Temperature - C Figure 11 15 10 TLE2022 INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE TLE2021 INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE 0 5 Figure 10 Figure 9 -30 0 VIC - Common-Mode Input Voltage - V Figure 12 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 37 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2024 INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE IIIII III III III 1 VCC = 15 V VO = 0 VIC = 0 -50 VCC = 15 V VIC = 0 TA = 25C 0.9 0.8 I III - Input Current - mA IIB - Input Bias Current - nA IIB -60 AA AA INPUT CURRENT vs DIFFERENTIAL INPUT VOLTAGE -40 -30 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -20 -75 0 -50 -25 0 25 50 75 100 125 TA - Free-Air Temperature - C 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 |VID| - Differential Input Voltage - V Figure 14 Figure 13 TLE2022 MAXIMUM PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT TLE2021 MAXIMUM PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT 16 VCC = 15 V TA = 25C 14 12 IIII IIII 10 VOM - 8 |VVOM| OM - Maximum Peak Output Voltage - V VOM - Maximum Peak Output Voltage - V V OM 16 IIII IIII VOM+ 6 AAA AAA AAA AA AA 4 2 0 0 2 4 6 8 IO - Output Current - mA 10 VCC = 15 V TA = 25C 14 12 IIII IIII 10 VOM- 8 38 VOM+ 6 4 2 0 0 2 4 6 8 10 |IO| - Output Current - mA 12 Figure 16 Figure 15 III III Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 14 1 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2024 MAXIMUM PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT 15 IIII VCC = 15 V TA = 25C 14 12 III III 10 VOM - 8 |VVOM| OM - Maximum Peak Output Voltage - V VOM - Maximum Peak Output Voltage - V VOM 16 MAXIMUM PEAK OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE III VOM + 6 AA AA AA 4 2 0 0 2 8 10 4 6 IO - Output Current - mA 12 14 14.5 VOM + 14 VOM - 13.5 13 AAA AAA AAA 12.5 12 -75 VCC = 15 V RL = 10 k TA = 25C -50 Figure 17 TLE2022 AND TLE2024 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 5 VCC = 5 V TA = 25C VOH - High-Level Output Voltage - V VOH VOH VOH - High-Level Output Voltage - V 5 4 3 2 AA AA 1 0 0 -1 -2 -3 -4 -5 -6 IOH - High-Level Output Current - mA -7 VCC = 5 V TA = 25C 4 3 2 1 0 0 -2 -4 -6 -8 -10 IOH - High-Level Output Current - mA Figure 20 Figure 19 125 Figure 18 TLE2021 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT AA AA -25 0 25 50 75 100 TA - Free-Air Temperature - C Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 39 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS 5 HIGH-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 5 AA AA VOL VOL - Low-Level Output Voltage - V VOH VOH - High-Level Output Voltage - V VCC = 5 V 4.8 4.6 No Load 4.4 AA AA AA RL = 10 k 4.2 4 -75 -50 -25 0 25 50 75 100 4 3 2 1 0 125 VCC = 5 V TA = 25C 0 0.5 1 1.5 2 2.5 IOL - Low-Level Output Current - mA TA - Free-Air Temperature - C Figure 21 Figure 22 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VOL VOL - Low-Level Output Voltage - V 1 IOL = 1 mA 0.75 IOL = 0 0.5 0.25 VCC = 5 V 0 -75 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C 125 VVOPP O(PP) - Maximum Peak-to-Peak Output Voltage - V LOW-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE AAA AAA 5 4 3 2 AAAAA AAAAA AA AA AAAAA AA 1 0 VCC = 5 V RL = 10 k TA = 25C 100 Figure 23 40 3 1k 10 k 100 k f - Frequency - Hz Figure 24 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1M TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VVOPP O(PP) - Maximum Peak-to-Peak Output Voltage - V 30 25 20 15 10 AA AAAA AA AAAA AA AAAA AA VCC = 15 V RL = 10 k TA = 25C 5 0 100 1k 10 k 100 k f - Frequency - Hz 1M Figure 25 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY IIIII IIIII IIIII IIIII 100 AVD - Large-Signal Differential Voltage Amplification - dB 60 80 Phase Shift 80 100 VCC = 15 V AVD 60 120 VCC = 5 V 40 140 20 160 IIIII IIIII IIIII RL = 10 k CL = 30 pF TA = 25C 0 -20 10 100 Phase Shift 120 180 1k 10 k 100 k f - Frequency - Hz 1M 10 M 200 Figure 26 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 41 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2021 LARGE-SCALE DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE TLE2022 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE 10 6 RL = 10 k IIIIII IIIIII 8 5 AVD AVD - Large-Signal Differential Voltage Amplification - V/V AVD - Large-Signal Differential Voltage Amplification - V/ V RL = 10 k VCC = 15 V 6 4 2 IIII IIII -50 -25 0 25 50 75 3 AA AA AA VCC = 5 V 0 -75 VCC = 15 V 4 100 2 1 VCC = 5 V 0 -75 125 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C TA - Free-Air Temperature - C Figure 28 Figure 27 TLE2024 LARGE-SCALE DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE TLE2021 SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE IIIII IIIII IIIII IIIII 10 10 VCC = 15 V 6 4 2 VCC = 5 V 0 -75 -50 -25 0 25 50 75 100 125 IIOS OS - Short-Circuit Output Current - mA AVD - Large-Signal Differential Voltage Amplification - V/ V RL = 10 k 8 VO = 0 TA = 25C 8 6 VID = -100 mV 4 2 0 -2 AA AA -4 IIIII -6 VID = 100 mV -8 -10 0 2 TA - Free-Air Temperature - C 42 4 6 8 10 12 |VCC | - Supply Voltage - V 14 Figure 30 Figure 29 125 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 16 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 AND TLE2024 SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE TLE2021 SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE 12 VO = 0 TA = 25C 10 IIIII VID = -100 mV 5 0 -5 VID = 100 mV -10 -15 0 2 4 6 8 10 12 14 TA = 25C IIOS OS - Short-Circuit Output Current - mA I OS - Short-Circuit Output Current - mA IOS 15 16 |VCC | - Supply Voltage - V 8 VID = -100 mV VO = VCC 4 0 AA AA AA -4 VID = 100 mV VO = 0 -8 - 12 5 0 10 15 20 25 VCC - Supply Voltage - V Figure 32 Figure 31 TLE2022 AND TLE2024 SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE IIII IIII TLE2021 SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 8 TA = 25C 10 IOS I OS - Short-Circuit Output Current - mA I OS - Short-Circuit Output CUrrent - mA IOS 15 VID = - 100 mV VO = VCC 5 0 -5 VID = 100 mV VO = 0 -10 -15 0 5 10 15 20 25 30 AA AA VCC - Supply Voltage - V VCC = 5 V 6 VID = -100 mV VO = 5 V 4 2 0 -2 VID = 100 mV VO = 0 -4 -6 -8 - 75 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 34 Figure 33 30 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 43 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 AND TLE2024 SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE TLE2021 SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 12 VCC = 5 V VID = -100 mV VO = 5 V 4 IOS I OS - Short-Circuit Output Current - mA IOS I OS- Short-Circuit Output Current - mA 6 2 0 -2 -4 III IIIII III -8 -10 -75 -50 -25 0 25 50 75 8 VID = -100 mV 4 0 -4 AA AA VID = 100 mV VO = 0 -6 VCC = 15 V VO = 0 100 -8 VID = 100 mV -12 -75 125 -50 TA - Free-Air Temperature -C 0 25 50 75 -25 TA - Free-Air Temperature - C TLE2022 AND TLE2024 SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 250 A IICC CC - Supply Current - ua I OS - Short-Circuit Output Current - mA IOS 200 5 VID = - 100 mV 0 VID = 100 mV -10 -50 -25 0 25 50 75 100 125 TA = 125C TA = 25C 100 AA AA -5 IIII IIII IIII IIII IIII IIII 150 TA = - 55C 50 0 0 2 4 6 8 10 12 |VCC | - Supply Voltage - V Figure 38 Figure 37 44 16 VO = 0 No Load VCC = 15 V VO = 0 TA - Free-Air Temperature - C 14 TLE2021 SUPPLY CURRENT vs SUPPLY VOLTAGE 15 -15 -75 125 Figure 36 Figure 35 10 100 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 SUPPLY CURRENT vs SUPPLY VOLTAGE 500 TLE2024 SUPPLY CURRENT vs SUPPLY VOLTAGE 1000 VO = 0 No Load 800 I CC - Supply Current - A IICC A CC - Supply Current - ua TA = 125C No Load 400 TA = 25C 300 TA = 125C TA = - 55C AA AA AA 200 100 0 IIII VO = 0 TA = 25C 600 TA = - 55C 400 200 0 2 4 6 8 10 12 |VCC | - Supply Voltage - V 14 0 16 0 2 4 IIIIII IIIIII 150 VCC = 2.5 V 125 100 AA AA 75 50 VO = 0 No Load -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C VCC = 15 V 400 IICC A CC - Supply Current - ua A IICC CC - Supply Current - ua 16 500 125 VCC = 2.5 V 300 200 100 VO = 0 No Load 0 -75 -50 Figure 41 14 VCC = 15 V 175 0 -75 12 TLE2022 SUPPLY CURRENT vs FREE-AIR TEMPERATURE IIIII IIIII 200 25 10 Figure 40 TLE2021 SUPPLY CURRENT vs FREE-AIR TEMPERATURE AA AA 8 |VCC | - Supply Voltage - V Figure 39 225 6 -25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 42 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 45 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS 1000 120 CMRR - Common-Mode Rejection Ratio - dB IIIII IIIII IIIII VCC = 15 V 800 I CC - Supply Current - A TLE2021 COMMON-MODE REJECTION RATIO vs FREQUENCY TLE2024 SUPPLY CURRENT vs FREE-AIR TEMPERATURE VCC = 2.5 V 600 400 200 VO = 0 No Load 0 -75 -50 -25 0 25 50 75 100 VCC = 15 V 80 VCC = 5 V 60 40 20 TA = 25C 0 125 IIIII IIIII IIIII IIIII 100 10 100 TA - Free-Air Temperature - C Figure 43 CMRR - Common-Mode Rejection Ratio - dB CMRR - Common-Mode Rehection Ratio - dB IIIII IIIII IIIII IIII IIII 120 VCC = 15 V 80 VCC = 5 V 60 40 20 0 100 1k 10 k 100 k f - Frequency - Hz 1M 10 M VCC = 15 V 100 VCC = 5 V 80 60 40 20 TA = 25C 0 10 10 100 46 1k 10 k 100 k 1M 10 M f - Frequency - Hz Figure 45 10 M TLE2024 COMMON-MODE REJECTION RATIO vs FREQUENCY TA = 25C 100 1M Figure 44 TLE2022 COMMON-MODE REJECTION RATIO vs FREQUENCY 120 1k 10 k 100 k f - Frequency - Hz Figure 46 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 SLEW RATE vs FREE-AIR TEMPERATURE TLE2021 SLEW RATE vs FREE-AIR TEMPERATURE 1 1 IIIII IIIII IIII IIII VCC = 15 V 0.8 VCC = 5 V 0.6 0.4 0.2 0 -75 VCC = 15 V SR - Slew Rate - V/ uss SR - Slew Rate - V/us s 0.8 0.6 VCC = 5 V 0.4 0.2 RL = 20 k CL = 30 pF See Figure 1 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C RL = 20 k CL = 30 pF See Figure 1 0 -75 125 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 48 Figure 47 TLE2024 SLEW RATE vs FREE-AIR TEMPERATURE VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 1 IIIII SR - Slew Rate - V/ V/s s VCC = 15 V 0.6 VCC = 5 V 0.4 0.2 0 -75 -25 50 0 25 50 75 100 125 VCC = 15 V RL = 10 k CL = 30 pF TA = 25C See Figure 4 IIIII IIIII 0 AA AA RL = 20 k CL = 30 pF See Figure 1 -50 VO - Output Voltage - mV VO 100 0.8 -50 -100 TA - Free-Air Temperature - C Figure 49 125 0 20 40 t - Time - s 60 80 Figure 50 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 47 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 4 VCC = 5 V RL = 10 k CL = 30 pF TA = 25C See Figure 4 IIIII 2.55 VO - Output Voltage - V VO VO - Output Voltage - V VO 2.6 TLE2021 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 2.5 AAA AAA VCC = 5 V RL = 10 k CL = 30 pF TA = 25C See Figure 1 IIIII IIIII 3 2 AA AA 2.45 2.4 0 20 40 t - Time - s 60 1 0 80 0 Figure 51 IIIII IIIII IIIII IIIII 4 VCC = 5 V RL = 10 k CL = 30 pF TA = 25C See Figure 1 2 AAA AAA 1 0 3 VCC = 5 V RL = 10 k CL = 30 pF TA = 25C See Figure 1 2 1 0 0 20 40 t - Time - s 60 80 0 20 40 t - Time - s Figure 53 48 80 TLE2024 VOLTAGE-FOLLOWER LARGE-SCALE PULSE RESPONSE VO - Output Voltage - V VO VO VO - Output Voltage - V 3 60 Figure 52 TLE2022 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 4 20 40 t - Time - s Figure 54 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 60 80 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2021 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE VO - Output Voltage - V VO 10 15 VCC = 15 V RL = 10 k CL = 30 pF TA = 25C See Figure 1 10 VO VO - Output Voltage - V 15 TLE2022 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 5 0 AA AA AA AA -5 -10 -15 0 20 40 t - Time - s 60 IIIIII IIIIII VCC = 15 V RL = 10 k CL = 30 pF TA = 25C See Figure 1 5 0 -5 -10 -15 80 0 TLE2024 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE IIIII IIIII IIIII IIIII 15 VO - Output Voltage - V VO 10 VCC = 15 V RL = 10 k CL = 30 pF TA = 25C See Figure 1 5 0 -5 -10 -15 0 20 t - Time - s Figure 57 60 80 Figure 56 40 60 80 VN(PP) VNPP - Peak-to-Peak Equivalent Input Noise Voltage - uV V Figure 55 20 40 t - Time - s AA AA AA POST OFFICE BOX 655303 PEAK-TO-PEAK EQUIVALENT INPUT NOISE VOLTAGE 0.1 TO 1 Hz IIIIII IIIIII 0.5 VCC = 15 V 0.4 TA = 25C 0.3 0.2 0.1 0 - 0.1 - 0.2 - 0.3 - 0.4 - 0.5 0 1 * DALLAS, TEXAS 75265 2 3 4 5 t - Time - s 6 7 8 9 10 Figure 58 49 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 PEAK-TO-PEAK EQUIVALENT INPUT NOISE VOLTAGE 0.1 TO 10 Hz 0.5 VCC = 15 V 0.4 TA = 25C 0.3 0.2 0.1 0 - 0.1 - 0.2 - 0.3 AAA AAA AAA - 0.4 - 0.5 0 1 2 3 4 5 6 t - Time - s 7 8 EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY AA AA AA VVn nV/ Hz n - Equivalent Input Noise Voltage - nVHz VN(PP) VNPP - Peak-to-Peak Equivalent Input Noise Voltage - uV V TYPICAL CHARACTERISTICS 9 VCC = 15 V RS = 20 TA = 25C See Figure 2 160 120 80 40 0 10 IIIII AAAAAA AAAAAA IIIII AAAAAA IIII IIIII AAAAAA IIIII 200 1 TLE2022 AND TLE2024 UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE 2 1 0 2 4 AAAAA AAAAA AAAAA AAAAA 4 RL = 10 k CL = 30 pF TA = 25C See Figure 3 3 10 k Figure 60 B1 B1 - Unity-Gain Bandwidth - MHz B1 B 1 - Unity-Gain Bandwidth - MHz 4 6 8 10 12 14 |VCC| - Supply Voltage - V 16 RL = 10 k CL = 30 pF TA = 25C See Figure 3 3 2 1 0 0 2 Figure 61 50 100 1k f - Frequency - Hz Figure 59 TLE2021 UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE 0 10 4 6 8 10 12 |VCC| - Supply Voltage - V Figure 62 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 14 16 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2021 UNITY-GAIN BANDWIDTH vs FREE-AIR TEMPERATURE 4 TLE2022 AND TLE2024 UNITY-GAIN BANDWIDTH vs FREE-AIR TEMPERATURE 4 RL = 10 k 3 VCC = 15 V 2 IIIII 1 VCC = 5 V 0 -75 -50 -25 0 25 50 75 TA - Free-Air Temperature - C 100 3 IIIIII IIIIII VCC = 15 V 2 VCC = 5 V 1 0 -75 125 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 63 TLE2022 AND TLE2024 PHASE MARGIN vs SUPPLY VOLTAGE 53 m m - Phase Margin m m - Phase Margin 55 RL = 10 k CL = 30 pF TA = 25C See Figure 3 48 46 AA AA AAAAA AAAAA AAAAA AAAAA RL = 10 k CL = 30 pF TA = 25C See Figure 3 51 AA AA 44 49 47 42 40 0 2 4 6 8 10 12 |VCC | - Supply Voltage - V 14 16 45 0 2 4 6 8 10 12 |VCC| - Supply Voltage - V 14 16 Figure 66 Figure 65 125 Figure 64 TLE2021 PHASE MARGIN vs SUPPLY VOLTAGE 50 AAAAA AAAAA AAAAA RL = 10 k CL = 30 pF See Figure 3 B1 B1 - Unity-Gain Bandwidth - MHz B B1 1 - Unity-Gain Bandwidth - MHz CL = 30 pF See Figure 3 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 51 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 AND TLE2024 PHASE MARGIN vs LOAD CAPACITANCE TLE2021 PHASE MARGIN vs LOAD CAPACITANCE 60 60 50 40 VCC = 5 V 30 VCC = 5 V 30 10 20 10 0 20 40 60 80 CL - Load Capacitance - pF 0 100 0 20 40 60 80 CL - Load Capacitance - pF 50 48 TLE2022 AND TLE2024 PHASE MARGIN vs FREE-AIR TEMPERATURE 54 RL = 10 k CL = 30 pF See Figure 3 52 VCC = 15 V VCC = 15 V 50 m m - Phase Margin m m - Phase Margin 46 44 42 VCC = 5 V 40 38 36 -75 48 AA AA AAAA AAAA AAAA AAAA 44 42 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C 125 VCC = 5 V 46 40 -75 RL = 10 k CL = 30 pF See Figure 3 -50 Figure 69 52 100 Figure 68 TLE2021 PHASE MARGIN vs FREE-AIR TEMPERATURE RL = 10 k TA = 25C See Figure 3 40 Figure 67 A A AAAA AAAA AAAA AA AA 20 0 VCC = 15 V VCC = 15 V m m - Phase Margin m m - Phase Margin 50 AA AA AA 70 RL = 10 k TA = 30 pF See Figure 3 -25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 70 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 APPLICATION INFORMATION voltage-follower applications The TLE202x circuitry includes input-protection diodes to limit the voltage across the input transistors; however, no provision is made in the circuit to limit the current if these diodes are forward biased. This condition can occur when the device is operated in the voltage-follower configuration and driven with a fast, large-signal pulse. It is recommended that a feedback resistor be used to limit the current to a maximum of 1 mA to prevent degradation of the device. This feedback resistor forms a pole with the input capacitance of the device. For feedback resistor values greater than 10 k, this pole degrades the amplifier phase margin. This problem can be alleviated by adding a capacitor (20 pF to 50 pF) in parallel with the feedback resistor (see Figure 71). CF = 20 pF to 50 pF IF 1 mA RF VCC + - VO VI + VCC - Figure 71. Voltage Follower Input offset voltage nulling The TLE202x series offers external null pins that further reduce the input offset voltage. The circuit in Figure 72 can be connected as shown if this feature is desired. When external nulling is not needed, the null pins may be left disconnected. OFFSET N1 OFFSET N2 + IN + - IN - 5 k VCC - (split supply) 1 k GND (single supply) Figure 72. Input Offset Voltage Null Circuit POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 53 TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 APPLICATION INFORMATION macromodel information Macromodel information provided was derived using Microsim PartsTM, the model generation software used with Microsim PSpiceTM. The Boyle macromodel (see Note 5) and subcircuit in Figure 73, Figure 74, and Figure 75 were generated using the TLE202x typical electrical and operating characteristics at 25C. Using this information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases): D D D D D D D D D D D D Maximum positive output voltage swing Maximum negative output voltage swing Slew rate Quiescent power dissipation Input bias current Open-loop voltage amplification Unity-gain frequency Common-mode rejection ratio Phase margin DC output resistance AC output resistance Short-circuit output current limit NOTE 5: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, "Macromodeling of Integrated Circuit Operational Amplifiers", IEEE Journal of Solid-State Circuits, SC-9, 353 (1974). 99 3 VCC + egnd ree cee Iee 9 din fb - + rp + re1 IN - IN+ 1 2 re2 14 13 Q1 Q2 C1 dp r2 - 53 dc 11 C2 6 gcm 54 - ve de 5 - ro1 + OUT Figure 73. Boyle Subcircuit PSpice and Parts are trademarks of MicroSim Corporation. 54 vlim 8 rc2 4 7 + ga 12 rc1 VCC - vc hlim - + 90 ro2 vb POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 92 + dip 91 + vip - - - + vin TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D - FEBRUARY 1997 - REVISED NOVEMBER 2010 .SUBCKT TLE2021 1 2 3 4 5 * c1 11 12 6.244E-12 c2 6 7 13.4E-12 c3 87 0 10.64E-9 cpsr 85 86 15.9E-9 dcm+ 81 82 dx dcm- 83 81 dx dc 5 53 dx de 54 5 dx dlp 90 91 dx dln 92 90 dx dp 4 3 dx ecmr 84 99 (2 99) 1 egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5 epsr 85 0 poly(1) (3,4) -60E-6 2.0E-6 ense 89 2 poly(1) (88,0) 120E-6 1 fb 7 99 poly(6) vb vc ve vlp vln vpsr 0 547.3E6 + -50E7 50E7 50E7 -50E7 547E6 ga 6 0 11 12 188.5E-6 gcm 0 6 10 99 335.2E-12 gpsr 85 86 (85,86) 100E-6 grc1 4 11 (4,11) 1.885E-4 grc2 4 12 (4,12) 1.885E-4 gre1 13 10 (13,10) 6.82E-4 gre2 14 10 (14,10) 6.82E-4 hlim 90 0 vlim 1k hcmr 80 1 poly(2) vcm+ vcm- 0 1E2 1E2 irp 3 4 185E-6 iee 3 10 dc 15.67E-6 iio 2 0 2E-9 i1 88 0 1E-21 q1 11 89 13 qx q2 12 80 14 qx R2 6 9 100.0E3 rcm 84 81 1K ree 10 99 14.76E6 rn1 87 0 2.55E8 rn2 87 88 11.67E3 ro1 8 5 62 ro2 7 99 63 vcm+ 82 99 13.3 vcm- 83 99 -14.6 vb 9 0 dc 0 vc 3 53 dc 1.300 ve 54 4 dc 1.500 vlim 7 8 dc 0 vlp 91 0 dc 3.600 vln 0 92 dc 3.600 vpsr 0 86 dc 0 .model dx d(is=800.0E-18) .model qx pnp(is=800.0E-18 bf=270) .ends Figure 74. Boyle Macromodel for the TLE2021 .SUBCKT TLE2022 1 2 3 4 5 * c1 11 12 6.814E-12 c2 6 7 20.00E-12 dc 5 53 dx de 54 5 dx dlp 90 91 dx dln 92 90 dx dp 4 3 dx egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5 fb 7 99 poly(5) vb vc ve vlp vln 0 + 45.47E6 -50E6 50E6 50E6 -50E6 ga 6 0 11 12 377.9E-6 gcm 0 6 10 99 7.84E-10 iee 3 10 DC 18.07E-6 hlim 90 0 vlim 1k q1 11 2 13 qx q2 12 1 14 qx r2 6 9 100.0E3 rc1 rc2 ge1 ge2 ree ro1 ro2 rp vb vc ve vlim vlp vln .model .model .ends 4 4 13 14 10 8 7 3 9 3 54 7 91 0 dx qx 11 2.842E3 12 2.842E3 10 (10,13) 31.299E-3 10 (10,14) 31.299E-3 99 11.07E6 5 250 99 250 4 137.2E3 0 dc 0 53 dc 1.300 4 dc 1.500 8 dc 0 0 dc 3 92 dc 3 d(is=800.0E-18) pnp(is=800.0E-18 bf=257.1) Figure 75. Boyle Macromodel for the TLE2022 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 55 PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) 5962-9088101MPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088101MPA TLE2021M 5962-9088102M2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088102M2A TLE2022MFKB 5962-9088102MPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088102MPA TLE2022M 5962-9088103M2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088103M2A TLE2024MFKB 5962-9088103MCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9088103MC A TLE2024MJB 5962-9088104Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088104Q2A TLE2021 AMFKB 5962-9088104QPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088104QPA TLE2021AM 5962-9088105Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088105Q2A TLE2022A MFKB 5962-9088105QPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088105QPA TLE2022AM 5962-9088106Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088106Q2A TLE2024A MFKB 5962-9088106QCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9088106QC A TLE2024AMJB 5962-9088107Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088107Q2A TLE2021 BMFKB Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) 5962-9088107QPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088107QPA TLE2021BM 5962-9088108Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088108Q2A TLE2022B MFKB 5962-9088108QPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088108QPA TLE2022BM 5962-9088109Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088109Q2A TLE2024 BMFKB 5962-9088109QCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9088109QC A TLE2024BMJB TLE2021ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2021AC TLE2021ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2021AC TLE2021ACP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2021AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2021AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2021AIP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2021AMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088104Q2A TLE2021 AMFKB TLE2021AMJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088104QPA TLE2021AM TLE2021BMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type Addendum-Page 2 TLE2021AC -40 to 85 2021AI 2021AI TLE2021AI 59629088107Q2A TLE2021 BMFKB Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLE2021BMJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type TLE2021BMJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type TLE2021CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 2021C TLE2021CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 2021C TLE2021CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 2021C TLE2021CP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type 0 to 70 TLE2021CP TLE2021CPE4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type 0 to 70 TLE2021CP TLE2021ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2021I TLE2021IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2021I TLE2021IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2021I TLE2021IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2021I TLE2021IP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type -40 to 85 TLE2021IP TLE2021MD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 2021M TLE2021MDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2021MJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 TLE2021MJG TLE2021MJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088101MPA TLE2021M TLE2022ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 2022AC TLE2022ACDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 2022AC Addendum-Page 3 -55 to 125 TLE2021 BMJG 9088107QPA TLE2021BM 2021M Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLE2022ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2022AC TLE2022ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2022AC TLE2022ACP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2022AC TLE2022ACPE4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2022AC TLE2022AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2022AI TLE2022AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2022AI TLE2022AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022AIP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2022AMD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022AMDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022AMDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022AMDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022AMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088105Q2A TLE2022A MFKB TLE2022AMJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088105QPA TLE2022AM TLE2022BMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088108Q2A TLE2022B MFKB TLE2022BMJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088108QPA TLE2022BM Addendum-Page 4 2022AI TLE2022AI -55 to 125 2022AM 2022AM -55 to 125 2022AM 2022AM Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLE2022CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022CP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2022CP TLE2022CPE4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2022CP TLE2022ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2022I TLE2022IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2022I TLE2022IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 2022I TLE2022IP ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2022IP TLE2022IPE4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2022IP TLE2022MD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022MDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022MDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022MDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2022MFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088102M2A TLE2022MFKB TLE2022MJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 TLE2022MJG TLE2022MJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9088102MPA TLE2022M TLE2024ACDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024AC TLE2024ACDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024AC Addendum-Page 5 2022C 0 to 70 -55 to 125 2022C 2022M 2022M -55 to 125 2022M 2022M Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLE2024ACN ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2024AIDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024AIN ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2024AMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088106Q2A TLE2024A MFKB TLE2024AMJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9088106QC A TLE2024AMJB TLE2024BMDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 TLE2024BM TLE2024BMDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024BMDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 TLE2024BM TLE2024BMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088109Q2A TLE2024 BMFKB TLE2024BMJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 TLE2024BMJ TLE2024BMJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9088109QC A TLE2024BMJB TLE2024CDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024C TLE2024CDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024C TLE2024CDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024C TLE2024CN ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type Addendum-Page 6 TLE2024ACN -40 to 85 TLE2024AI TLE2024AIN TLE2024BM TLE2024CN Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) TLE2024CNE4 ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2024CN TLE2024IDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2024IN ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type TLE2024MDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 TLE2024M TLE2024MDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 TLE2024M TLE2024MFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629088103M2A TLE2024MFKB TLE2024MJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9088103MC A TLE2024MJB TLE2024I TLE2024IN (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Addendum-Page 7 Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLE2021, TLE2021A, TLE2021AM, TLE2021M, TLE2022, TLE2022A, TLE2022AM, TLE2022M, TLE2024, TLE2024A, TLE2024AM, TLE2024B, TLE2024BM, TLE2024M : * Catalog: TLE2021A, TLE2021, TLE2022A, TLE2022, TLE2024A, TLE2024B, TLE2024 * Automotive: TLE2021-Q1, TLE2021A-Q1, TLE2021A-Q1, TLE2021-Q1, TLE2022-Q1, TLE2022A-Q1, TLE2022A-Q1, TLE2022-Q1, TLE2024-Q1, TLE2024A-Q1, TLE2024A-Q1, TLE2024-Q1 * Enhanced Product: TLE2021-EP, TLE2021A-EP, TLE2021A-EP, TLE2021-EP, TLE2022-EP, TLE2022A-EP, TLE2022A-EP, TLE2022-EP, TLE2024-EP, TLE2024A-EP, TLE2024AEP, TLE2024-EP * Military: TLE2021M, TLE2021AM, TLE2022M, TLE2022AM, TLE2024M, TLE2024AM, TLE2024BM NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects * Enhanced Product - Supports Defense, Aerospace and Medical Applications * Military - QML certified for Military and Defense Applications Addendum-Page 8 PACKAGE MATERIALS INFORMATION www.ti.com 3-Aug-2018 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLE2021ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2021ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2021AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2021CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2021IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2022ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2022AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2022AMDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2022AMDRG4 SOIC D 8 2500 330.0 12.5 6.4 5.2 2.1 8.0 12.0 Q1 TLE2022CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2022IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2022MDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2024ACDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 TLE2024CDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 3-Aug-2018 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLE2021ACDR SOIC D 8 2500 340.5 338.1 20.6 TLE2021ACDR SOIC D 8 2500 367.0 367.0 38.0 TLE2021AIDR SOIC D 8 2500 340.5 338.1 20.6 TLE2021CDR SOIC D 8 2500 340.5 338.1 20.6 TLE2021IDR SOIC D 8 2500 340.5 338.1 20.6 TLE2022ACDR SOIC D 8 2500 340.5 338.1 20.6 TLE2022AIDR SOIC D 8 2500 340.5 338.1 20.6 TLE2022AMDR SOIC D 8 2500 367.0 367.0 38.0 TLE2022AMDRG4 SOIC D 8 2500 340.5 338.1 20.6 TLE2022CDR SOIC D 8 2500 340.5 338.1 20.6 TLE2022IDR SOIC D 8 2500 340.5 338.1 20.6 TLE2022MDR SOIC D 8 2500 367.0 367.0 38.0 TLE2024ACDWR SOIC DW 16 2000 367.0 367.0 38.0 TLE2024CDWR SOIC DW 16 2000 367.0 367.0 38.0 Pack Materials-Page 2 PACKAGE OUTLINE J0014A CDIP - 5.08 mm max height SCALE 0.900 CERAMIC DUAL IN LINE PACKAGE PIN 1 ID (OPTIONAL) A 4X .005 MIN [0.13] .015-.060 TYP [0.38-1.52] 1 14 12X .100 [2.54] 14X .014-.026 [0.36-0.66] 14X .045-.065 [1.15-1.65] .010 [0.25] C A B .754-.785 [19.15-19.94] 8 7 B .245-.283 [6.22-7.19] .2 MAX TYP [5.08] C .13 MIN TYP [3.3] SEATING PLANE .308-.314 [7.83-7.97] AT GAGE PLANE .015 GAGE PLANE [0.38] 0 -15 TYP 14X .008-.014 [0.2-0.36] 4214771/A 05/2017 NOTES: 1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This package is hermitically sealed with a ceramic lid using glass frit. 4. Index point is provided on cap for terminal identification only and on press ceramic glass frit seal only. 5. Falls within MIL-STD-1835 and GDIP1-T14. www.ti.com EXAMPLE BOARD LAYOUT J0014A CDIP - 5.08 mm max height CERAMIC DUAL IN LINE PACKAGE (.300 ) TYP [7.62] SEE DETAIL A SEE DETAIL B 1 14 12X (.100 ) [2.54] SYMM 14X ( .039) [1] 8 7 SYMM LAND PATTERN EXAMPLE NON-SOLDER MASK DEFINED SCALE: 5X .002 MAX [0.05] ALL AROUND (.063) [1.6] METAL ( .063) [1.6] SOLDER MASK OPENING METAL (R.002 ) TYP [0.05] .002 MAX [0.05] ALL AROUND SOLDER MASK OPENING DETAIL A DETAIL B SCALE: 15X 13X, SCALE: 15X 4214771/A 05/2017 www.ti.com GENERIC PACKAGE VIEW DW 16 SOIC - 2.65 mm max height SMALL OUTLINE INTEGRATED CIRCUIT Images above are just a representation of the package family, actual package may vary. Refer to the product data sheet for package details. 4040000-2/H PACKAGE OUTLINE DW0016A SOIC - 2.65 mm max height SCALE 1.500 SOIC C 10.63 TYP 9.97 SEATING PLANE PIN 1 ID AREA A 0.1 C 14X 1.27 16 1 2X 8.89 10.5 10.1 NOTE 3 8 9 0.51 0.31 0.25 C A B 16X B 7.6 7.4 NOTE 4 2.65 MAX 0.33 TYP 0.10 SEE DETAIL A 0.25 GAGE PLANE 0.3 0.1 0 -8 1.27 0.40 DETAIL A (1.4) TYPICAL 4220721/A 07/2016 NOTES: 1. All linear dimensions are in millimeters. Dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm, per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm, per side. 5. Reference JEDEC registration MS-013. www.ti.com EXAMPLE BOARD LAYOUT DW0016A SOIC - 2.65 mm max height SOIC 16X (2) SEE DETAILS SYMM 16 1 16X (0.6) SYMM 14X (1.27) 9 8 R0.05 TYP (9.3) LAND PATTERN EXAMPLE SCALE:7X METAL SOLDER MASK OPENING SOLDER MASK OPENING 0.07 MAX ALL AROUND METAL 0.07 MIN ALL AROUND SOLDER MASK DEFINED NON SOLDER MASK DEFINED SOLDER MASK DETAILS 4220721/A 07/2016 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com EXAMPLE STENCIL DESIGN DW0016A SOIC - 2.65 mm max height SOIC 16X (2) SYMM 1 16 16X (0.6) SYMM 14X (1.27) 9 8 R0.05 TYP (9.3) SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE:7X 4220721/A 07/2016 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com MECHANICAL DATA MCER001A - JANUARY 1995 - REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2018, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: TLE2021AID TLE2021AIP TLE2021ACD TLE2021ACP TLE2021ACDG4 TLE2021ACDR TLE2021ACDRG4 TLE2021ACPE4 TLE2021AIDG4 TLE2021AIDRG4 TLE2021AIDR