VS-SD700C..L Series www.vishay.com Vishay Semiconductors Standard Recovery Diodes, (Hockey PUK Version), 700 A FEATURES * Wide current range * High voltage ratings up to 4500 V * High surge current capabilities * Diffused junction * Hockey PUK version * Case style B-PUK (DO-200AB) * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 B-PUK (DO-200AB) TYPICAL APPLICATIONS * Converters PRIMARY CHARACTERISTICS * Power supplies IF(AV) 700 A Package B-PUK (DO-200AB) Circuit configuration Single * High power drives * Auxiliary system supplies for traction applications MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) Ths IF(RMS) Ths IFSM I2t VRRM VALUES UNITS 700 A 55 C 1310 A 25 C 50 Hz 7500 60 Hz 7850 50 Hz 281 60 Hz 257 Range 3000 to 4500 V -40 to +150 C IRRM MAXIMUM AT TJ = TJ MAXIMUM mA TJ A kA2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-SD700C..L VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 30 3000 3100 36 3600 3700 40 4000 4100 45 4600 4600 50 Revision: 11-Jan-18 Document Number: 93552 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-SD700C..L Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER TEST CONDITIONS SYMBOL Maximum average forward current at heatsink temperature 180 conduction, half sine wave Double side (single side) cooled IF(AV) IF(RMS) Maximum RMS forward current 25 C heatsink temperature double side cooled t = 8.3 ms IFSM t = 8.3 ms Maximum I2t for fusing I 2t Maximum I2t for fusing I2t t = 8.3 ms t = 8.3 ms C A 6310 Sinusoidal half wave, initial TJ = TJ maximum 6600 281 257 100 % VRRM reapplied t = 10 ms 55 (85) 7500 No voltage reapplied t = 10 ms A 7850 100 % VRRM reapplied t = 10 ms UNITS 1310 No voltage reapplied t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current VALUES 700 (345) kA2s 199 182 t = 0.1 to 10 ms, no voltage reapplied 2810 Low level value of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.88 High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ = TJ maximum 0.99 kA2s V Low level value of forward slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.78 High level value of forward slope resistance rf2 (I > x IF(AV)), TJ = TJ maximum 0.73 Ipk = 1000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.66 V VALUES UNITS m VFM Maximum forward voltage drop THERMAL AND MECHANICAL SPECIFICATIONS SYMBO L PARAMETER Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink TEST CONDITIONS TJ -40 to +150 TStg -55 to +200 RthJ-hs DC operation single side cooled 0.11 DC operation double side cooled 0.05 Mounting force, 10 % Approximate weight Case style See dimensions - link at the end of datasheet C K/W 9800 (1000) N (kg) 250 g B-PUK (DO-200AB) RthJ-hs CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE 180 0.011 0.011 0.008 0.008 120 0.014 0.015 0.014 0.014 90 0.018 0.018 0.019 0.019 60 0.026 0.026 0.027 0.028 30 0.045 0.046 0.046 0.046 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note * The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC Revision: 11-Jan-18 Document Number: 93552 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-SD700C..L Series www.vishay.com SD700C..L Series ( Single Side Cooled) R th J-hs (DC) = 0.11 K/W 140 130 120 110 100 C o ndu ct io n A ng le 90 80 70 30 60 90 60 120 50 40 180 30 0 100 200 300 400 500 Maximum Allowable Heatsink Tem perature (C) Maxim um Allowable Heatsin k Tem perature (C) 150 Vishay Semiconductors 150 140 130 120 110 100 90 80 70 60 50 40 30 20 SD700C..L Series (Double Side Cooled) R thJ- hs (DC) = 0.05 K/W Co n duc tio n Pe rio d 30 60 90 120 180 DC 0 Average Forward Curren t (A) 600 800 1000 1200 1400 Fig. 4 - Current Ratings Characteristics 2500 150 140 130 120 110 100 90 80 70 60 50 40 30 20 SD700C..L Series ( Single Side Cooled) R th J-hs (D C) = 0.11 K/W Maxim um Average Forward Power Loss (W ) Maxim um Allowable Heatsin k Tem perature (C) 400 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics C o ndu ctio n Pe rio d 30 60 90 120 180 DC 0 200 400 600 180 120 90 60 30 2000 1500 Co n duc tio n An g le 500 SD700C..L Series TJ = 150C 0 0 800 120 C o nd uctio n A ng le 80 30 60 60 90 40 120 180 20 0 0 500 1000 1500 2000 600 800 1000 Fig. 5 - Forward Power Loss Characteristics 2500 Average Forward Current (A) Fig. 3 - Current Ratings Characteristics Maxim um Average Forw ard Power Loss (W ) 140 100 400 2500 SD2000C..L Series (Double Side Cooled) R th J- hs (DC) = 0.031 K/W 160 200 Average Forward Current (A) Fig. 2 - Current Ratings Characteristics 180 RM S Lim it 1000 Average Forward Current (A) Maxim um Allowable Heatsin k Tem perature ( C) 200 DC 180 120 90 60 30 2000 1500 RM S Lim it 1000 C o nd uctio n P erio d 500 SD 700C..L Series TJ = 150C 0 0 200 400 600 800 1000 1200 1400 Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics Revision: 11-Jan-18 Document Number: 93552 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-SD700C..L Series www.vishay.com Vishay Semiconductors 9000 At Any Rated Load Con dition And W ith 50% Rated V RR M Applied Followin g Surge In itial TJ = 150 C 6000 @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Peak Half Sin e W ave Forward Current (A) Peak Half Sine W ave Forward Cu rrent (A) 7000 5000 4000 3000 SD700C..L Series 2000 1 10 Maxim um Non Repetitive Surge Curren t V ersus Pulse Train Duration. In itial TJ = 150 C No Voltage Reapplied 50% Rated V RR MReapplied 8000 7000 6000 5000 4000 3000 2000 SD700C..L Series 1000 0.01 100 0.1 1 Pulse Train Duration (s) N um be r O f Eq ual A m p lit ude H alf C y cle C urre nt P ulse s (N ) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled In stant aneous Forward Current (A) 10000 TJ = 25C T = 150C J 1000 SD 700C..L Series 100 0.5 1 1. 5 2 2.5 3 3.5 4 Instan tan eous Forward Voltage (V) Fig. 9 - Forward Voltage Drop Characteristics T ran s ie n t T h e rm a l Im p e d a n c e Z thJ-hs (K / W ) 1 S t e a d y S t a te V alue R thJ-hs = 0 .1 1 K /W ( S in g le Sid e C o o le d ) 0 .1 R thJ-hs = 0 .0 5 K /W ( D o ub le Sid e C o o le d ) ( D C O pe ra tio n ) 0 .0 1 S D 7 0 0 C ..L S e rie s 0 .0 0 1 0 .0 01 0 .01 0 .1 1 10 S qu a re W a v e P ulse D u r at io n ( s) Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Revision: 11-Jan-18 Document Number: 93552 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-SD700C..L Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- SD 70 0 C 45 L 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Diode 3 - Essential part number 4 - 0 = standard recovery 5 - C = ceramic PUK 6 - Voltage code x 100 = VRRM (see Voltage Ratings table) 7 - L = PUK case B-PUK (DO-200AB) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95246 Revision: 11-Jan-18 Document Number: 93552 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors B-PUK (DO-200AB) DIMENSIONS in millimeters (inches) 58.5 (2.30) DIA. MAX. 3.5 (0.14) DIA. NOM. x 1.8 (0.07) deep MIN. both ends 0.8 (0.03) both ends 34 (1.34) DIA. MAX. 2 places 25.4 (1) 26.9 (1.06) C A 53 (2.09) DIA. MAX. Note: A = Anode C = Cathode Quote between upper and lower pole pieces has to be considered after application of mounting force (see Thermal and Mechanical Specifications) Revision: 12-Jul-17 Document Number: 95246 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-SD700C36L VS-SD700C30L VS-SD700C45L