VS-SD700C..L Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 1Document Number: 93552
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Standard Recovery Diodes,
(Hockey PUK Version), 700 A
FEATURES
• Wide current range
• High voltage ratings up to 4500 V
• High surge current capabilities
• Diffused junction
• Hockey PUK version
• Case style B-PUK (DO-200AB)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
• Converters
• Power supplies
• High power drives
• Auxiliary system supplies for traction applications
ELECTRICAL SPECIFICATIONS
PRIMARY CHARACTERISTICS
IF(AV) 700 A
Package B-PUK (DO-200AB)
Circuit configuration Single
B-PUK (DO-200AB)
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IF(AV)
700 A
Ths 55 °C
IF(RMS)
1310 A
Ths 25 °C
IFSM
50 Hz 7500 A
60 Hz 7850
I2t50 Hz 281 kA2s
60 Hz 257
VRRM Range 3000 to 4500 V
TJ-40 to +150 °C
VOLTAGE RATINGS
TYPE NUMBER VOLTAGE
CODE
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
IRRM MAXIMUM
AT TJ = TJ MAXIMUM
mA
VS-SD700C..L
30 3000 3100
50
36 3600 3700
40 4000 4100
45 4600 4600
VS-SD700C..L Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 2Document Number: 93552
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at heatsink temperature IF(AV)
180° conduction, half sine wave
Double side (single side) cooled
700 (345) A
55 (85) °C
Maximum RMS forward current IF(RMS) 25 °C heatsink temperature double side cooled 1310
A
Maximum peak, one-cycle forward,
non-repetitive surge current IFSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
7500
t = 8.3 ms 7850
t = 10 ms 100 % VRRM
reapplied
6310
t = 8.3 ms 6600
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
281
kA2s
t = 8.3 ms 257
t = 10 ms 100 % VRRM
reapplied
199
t = 8.3 ms 182
Maximum I2t for fusing I2tt = 0.1 to 10 ms, no voltage reapplied 2810 kA2s
Low level value of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.88 V
High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ = TJ maximum 0.99
Low level value of forward
slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.78
m
High level value of forward
slope resistance rf2 (I > x IF(AV)), TJ = TJ maximum 0.73
Maximum forward voltage drop VFM Ipk = 1000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.66 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBO
LTEST CONDITIONS VALUES UNITS
Maximum junction operating
temperature range TJ-40 to +150 °C
Maximum storage temperature range TStg -55 to +200
Maximum thermal resistance,
junction to heatsink RthJ-hs
DC operation single side cooled 0.11 K/W
DC operation double side cooled 0.05
Mounting force, ± 10 % 9800
(1000)
N
(kg)
Approximate weight 250 g
Case style See dimensions - link at the end of datasheet B-PUK (DO-200AB)
RthJ-hs CONDUCTION
CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.011 0.011 0.008 0.008
TJ = TJ maximum K/W
120° 0.014 0.015 0.014 0.014
90° 0.018 0.018 0.019 0.019
60° 0.026 0.026 0.027 0.028
30° 0.045 0.046 0.046 0.046
VS-SD700C..L Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 3Document Number: 93552
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
Fig. 3 - Current Ratings Characteristics
Fig. 4 - Current Ratings Characteristics
Fig. 5 - Forward Power Loss Characteristics
Fig. 6 - Forward Power Loss Characteristics
30
40
50
60
70
80
90
100
110
120
130
140
150
0 100 200 300 400 500
30° 60° 90° 120° 180°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Single Side Cooled)
R (D C ) = 0.11 K/W
th J-hs
Conduction Angle
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0200400600800
30° 60°
90°
180°
DC
120°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Single Side Cooled)
R (D C) = 0.11 K/W
th J-hs
Conduction Period
0
20
40
60
80
100
120
140
160
180
0 500 1000 1500 2000 2500
30° 60° 90° 120° 180°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature ( °C)
Conduction Angle
SD2000C..L Series
(Double Side Cooled)
R (D C ) = 0.031 K/W
th J- hs
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0 200 400 600 800 1000 1200 1400
30°
60°
90°
180°
DC
120°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Double Side Cooled)
R (DC) = 0.05 K/W
thJ- hs
Conduction Period
0
500
1000
1500
2000
2500
0 200 400 600 800 1000
180°
120°
90°
60°
30°
Average Forward Current (A)
Maximum Average Forward Power Loss (W)
RMS Limit
SD700C..L Series
T = 150° C
J
Conduction Angle
0
500
1000
1500
2000
2500
0 200 400 600 800 1000 1200 1400
DC
180°
120°
90°
60°
30°
Average Forward Curre nt (A)
RMS Limit
Maximum Average Forward Power Loss (W)
SD 700 C..L Ser ies
T = 150°C
J
Conduction Period
VS-SD700C..L Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 4Document Number: 93552
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 9 - Forward Voltage Drop Characteristics
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
2000
3000
4000
5000
6000
7000
001011
N um be r O f Eq ua l A m p lit ud e H a lf C y cl e C urr e nt P ulse s (N )
Peak Half Sine Wave Forward Current (A)
SD700C..L Series
Initial T = 150 °C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
At Any Rated Load Condition And With
50% Rated V Applied Following Surge
RRM
1000
2000
3000
4000
5000
6000
7000
8000
9000
0.01 0.1 1
Pulse Train Duration (s)
Peak Half Sine W ave Forward Current (A)
Maximum Non Repetitive Surge Current
SD700C..L Series
50% Rated V Reapplied
No Voltage Reapplied
In itia l T = 15 0 °C
RRM
J
Versus Pulse Train Duration.
100
1000
10000
0.511.522.533.54
T = 25°C
J
Instantaneous Forward Voltage (V)
In stant aneous Forward Current (A)
SD 700C..L Series
T = 150°C
J
0.001
0.01
0.1
1
0111.010.0100.0
Square Wave Pulse Duration (s)
SD700C..L Series
thJ-hs
Transient Thermal Im pedance Z (K/W )
Steady State V alue
R = 0.11 K/W
(Single Side C ooled)
R = 0.05 K/W
(Double Side Cooled)
(D C O peration )
thJ-hs
thJ-hs
VS-SD700C..L Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 5Document Number: 93552
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95246
1
- Diode
2
- Essential part number
3
- 0 = standard recovery
4
- C = ceramic PUK
5
- Voltage code x 100 = V
RRM
(see Voltage Ratings table)
6
7-
L = PUK case B-PUK (DO-200AB)
Device code
51 32 4 6 7
SDVS- 70 0 C 45 L
- Vishay Semiconductors product
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 12-Jul-17 1Document Number: 95246
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
B-PUK (DO-200AB)
DIMENSIONS in millimeters (inches)
58.5 (2.30) DIA. MAX.
53 (2.09) DIA. MAX.
Quote between upper and lower pole pieces has to be considered after
application of mounting force (see Thermal and Mechanical Specifications)
3.5 (0.14) DIA. NOM. x
1.8 (0.07) deep MIN. both ends
0.8 (0.03)
both ends
34 (1.34) DIA. MAX.
2 places
26.9 (1.06)
25.4 (1)
C
A
Note:
A = Anode
C = Cathode
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
