SRP600A thru SRP600K
Document Number 88745
10-Oct-05
Vishay General Semiconductor
www.vishay.com
1
Case Style P600
Fast Switching Fast Rectifier
Major Ratings and Characteristics
IF(AV) 6.0 A
VRRM 50 V to 800 V
IFSM 300 A
trr 100 ns, 150 ns, 200 ns
VF1.3 V
IR10 µA
Tj max. 150 °C
Features
• Fast switching for high efficiency
• Low forward voltage drop
• Low leakage current
• High forward current operation
• High forward surge capability
• Solder Dip 260 °C, 40 seconds
Typical Applications
For use in fast switching rectification of power supply,
inverters, converters and freewheeling diodes for
consumer and Telecommunication.
(Note: These devices are not Q101 qualified. There-
fore, the devices specified in this datasheet have not
been designed for use in automotive or Hi-Rel appli-
cations.)
Mechanical Data
Case: P600, void-free molded epoxy body
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads, solder-
able per J-STD-002B and JESD22-B102D
Polarity: Color band denotes cathode end
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter Symbol SRP600A SRP600B SRP600D SRP600G SRP600J SRP600K Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 V
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 55 °C
IF(AV) 6.0 A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM 300 A
Operating junction temperature range TJ - 50 to + 125 °C
Storage temperature range TSTG - 50 to + 150 °C
www.vishay.com
2
Document Number 88745
10-Oct-05
SRP600A thru SRP600K
Vishay General Semiconductor
Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Thermal Characteristics
(TA = 25 °C unless otherwise noted)
Notes:
(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length with both leads equally heat sink
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise noted)
Parameter Test condition Symbol SRP600A SRP600B SRP600D SRP600G SRP600J SRP600K Unit
Maximum
instantaneous
forward voltage
at 6.0 A VF 1.3 V
Maximum DC reverse
current at rated DC
blocking voltage
TA = 25 °C
TA = 100 °C
IR 10
1.0
µA
Maximum reverse
recovery time
at IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr 100 150 200 ns
Parameter Symbol SRP600A SRP600B SRP600D SRP600G SRP600J SRP600K Unit
Typical thermal resistance (1) RθJA 10 °C/W
Figure 1. Forward Current Derating Curves
Ambient Temperature (°C)
Average Forward Current (A)
20 40 60 80100 120 140 160 180
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
I(pk)
I(AV)
=π
1.1 x 1.1" (30 x 30mm)
Copper Pads
Resistive or Inductive Load
CapacitiveLoad
5.0
10
20
=
I(pk)
I(AV)
Figure 2. Forward Current Derating Curve
Lead Temperature °C
Average Forward Current (A)
75 808590 95 100 105 110 115 120 125
0
4
8
12
16
20
1.6x1.6 x 0.04"
(40x40x1mm
)
Copper Heatsinks
L=Lead Length
ResistiveorInductive Load
L=0.12" (3.2mm)
L=0.25" (6.3mm)
L=0.375" (9.5mm)
L = 0.62" (15.9mm)
SRP600A thru SRP600K
Document Number 88745
10-Oct-05
Vishay General Semiconductor
www.vishay.com
3
Package outline dimensions in inches (millimeters)
Figure 3. Maximum Non-Repetitive Peak Forward Surge Current
Figure 4. Typical Instantaneous Forward Characteristics
Peak Forward Surge Current (A)
110 100
100
150
200
250
300
350
400
Number of Cycles at 60 Hz
8.3 ms Single Half Sine-Wave
TJ = 125 °C
TJ = 25 °C
InstantaneousForward Voltage (%)
InstantaneousForward Current (A)
0.6 0.81.0 1.2 1.4 1.6 1.82.0
0.1
1
10
100
TJ = 25 °C
Pulse Width = 300 µs
1% Duty Cycle
Figure 5. Typical Reverse Characteristics
Figure 6. Typical Thermal Resistance
Percent of Rated Peak Reverse Voltage (V)
020 40 60 80100
0.01
0.1
1
10
Instantaneous Reverse Current (µA)
TJ = 100 °C
TJ = 25 °C
TJ = 50 °C
Equal Lead Lengths to Heatsink (Inches)
R
ΘJL
Th
erma
lR
es
i
stance
F
rom
J
unct
i
on
to Lead, °CW
00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80.9 1.0
0
5.0
10
15
20
25
L=Lead Length
Copper
Heatsinks
0.052 (1.32)
0.048 (1.22)
0.360 (9.1)
0.340 (8.6)
DIA.
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
1.0 (25.4)
MIN.
Case Style P600
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
