Bulletin PD-20408 07/04 30BQ060PbF SCHOTTKY RECTIFIER 3 Amp IF(AV) = 3.0Amp VR = 60V Description/ Features Major Ratings and Characteristics The 30BQ060PbF surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Characteristics Value Units IF(AV) Rectangular waveform 3.0 A VRRM 60 V IFSM @ t p= 5 s sine 1200 A High frequency operation VF @ 3.0 Apk, TJ = 125C 0.52 V Guard ring for enhanced ruggedness and long term reliability TJ range - 55 to 150 C Small foot print, surface mountable Very low forward voltage drop Lead-Free ("PbF" suffix) Case Styles 30BQ060PbF SMC www.irf.com 1 30BQ060PbF Bulletin PD-20408 07/04 Voltage Ratings Part number VR 30BQ060PbF Max. DC Reverse Voltage (V) 60 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 30BQ IF(AV) Max. Average Forward Current 3.0 Units Conditions A 4.0 50% duty cycle @ T L = 113 C, rectangular wave form Max. Peak One Cycle Non-Repetitive 1200 Surge Current @ TC = 25C 130 EAS Non Repetitive Avalanche Energy 5.0 mJ IAR Repetitive Avalanche Current 1.0 A IFSM 50% duty cycle @ T L = 123 C, rectangular wave form A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 C, IAS = 1.0A, L = 10mH Current decaying linearly to zero in 1 sec Frequency limited by T J max. Va = 1.5 x Vr typical Electrical Specifications Parameters VFM 30BQ Max. Forward Voltage Drop (1) Units Conditions 0.58 V @ 3A 0.76 V @ 6A 0.52 V @ 3A 0.66 V @ 6A TJ = 125 C IRM Max. Reverse Leakage Current (1) 0.5 mA 20 mA TJ = 125 C CT Max. Junction Capacitance 180 pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25C LS Typical Series Inductance 3.0 nH Measured lead to lead 5mm from package body 10000 V/s dv/dt Max. Voltage Rate of Change TJ = 25 C TJ = 25 C VR = rated VR (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 30BQ TJ Max. Junction Temperature Range (*) - 55 to 150 Tstg Max. Storage Temperature Range RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight - 55 to 150 46 C/W DC operation 0.24(0.008) g (oz.) SMC 1 Rth( j-a) C (**) IR3H < C C/W DC operation Device Marking dTj Conditions 12 Case Style (*) dPtot Units Similar to DO-214AB thermal runaway condition for a diode on its own heatsink (**) Mounted 1 inch square PCB 2 www.irf.com 30BQ060PbF Bulletin PD-20408 07/04 100 T = 150C J 125C 10 100C 1 75C 50C 0.1 25C 0.01 0.001 0 1 T J = 150C T J = 125C 60 1000 T = 25C J 0.1 0.1 10 20 30 40 50 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Junction Capacitance - C T (p F) Instantaneous Forward Current - I F (A) Reverse Current - I R (mA) 10 T = 25C J 100 10 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Forward Voltage Drop - VFM (V) 0.9 0 10 20 30 40 50 60 70 Reverse Voltage - VR (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance Z thJC (C/W) 100 10 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM 1 t1 0.1 Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z www.irf.com t2 Notes: thJC 10 100 Characteristics (Per Leg) 3 30BQ060PbF Bulletin PD-20408 07/04 2.5 150 140 Average Power Loss (Watts) Allowable Lead Temperature (C) 160 DC 130 120 80% Square Wave (D = 0.50) 110 100 90 80 see note (2) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 2 1.5 RMS Limit 1 DC 0.5 70 0 0 1 2 3 4 5 Average Forward Current - I F(AV) (A) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current 1000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge Non-Repetitive Surge Current - I FSM (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature 100 10 100 1000 10000 Square Wave Pulse Duration - T p (Microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ V R1 = 80% rated VR 4 www.irf.com 30BQ060PbF Bulletin PD-20408 07/04 Outline Table Device Marking: IR3H 2.75 (.108) 3.15 (.124) 5.59 (.220) 6.22 (.245) CATHODE 6.60 (.260) 1 7.11 (.280) ANODE 2 .152 (.006) .305 (.012) 1 POLARITY 2.00 (.079) 2.62 (.103) 2 PART NUMBER .102 (.004) 0.76 (.030) 1.52 (.060) .203 (.008) 7.75 (.305) 8.13 (.320) Outline SMC Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IR3H VOLTAGE CURRENT IR LOGO PYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free" www.irf.com 5 30BQ060PbF Bulletin PD-20408 07/04 Tape & Reel Information Dimensions in millimetres and (inches) Ordering Information Table Device Code 30 B Q 060 TR PbF 1 2 3 4 5 6 1 - Current Rating 2 - B = Single Lead Diode 3 - Q = Schottky Q Series 4 - Voltage Rating (060 = 60V) 5 - y none = Box (1000 pieces) 6 - y TR = Tape & Reel (3000 pieces) y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/04 6 www.irf.com