http://airpax.sensata.com/
PGFI Series - 15 Amp Plug Series
268
PGFI Series
15 Amp Plug Series GFCI / ELCI
INTRODUCTION
The LineGard™ 15 Amp Plug Series is a ground fault circuit interrupter designed and manufactured by North Shore Safety, Ltd., a
leader in innovated safety products. The PGFP product is rated for 15 amps at 120 VAC and available in either manual (safe start) or
automatic reset configuration.
Standard offerings include products geared for maintenance repair organizations (MRO), original equipment manufacturers (OEM)
or general portable power applications. MRO products are supplied with heavy-duty 12/3 conductor high flex (indoor/outdoor) safety
yellow cable (SJTW type) capable of withstanding heavy trade or industrial use. OEM products are configured with robust 14/3
conductor (indoor/outdoor) black cable (SJTW type) for integration into trade related equipment. All products are industrial/trade
grade tough and are backed by a 2 year manufacturer’s warranty. Note that any cord or equipment updated with this device becomes
OSHA compliant for power usage in a confined space and NEC compliant to NEC 590.6 (a) and (b).
nuisance tripping from rough service
assemblies
SPECIFICATIONS
Listing Type
Rated Supply Voltage 120VAC
Rated Current
and/or cable
Trip Level, Class A
Operating Frequency 60 Hz
Reset Type1Automatic or Manual
Ground Trip Current 4 mA to 6 mA
Overload Current 90 Amps @ 125VAC
Insulation Voltage 1,500 VRMS for 1 minute
Endurance Operations 3000 operations
1. Manual configuration should be specified if automatic start-up after power
restoration of circuit power creates an unsafe condition.
2. Integrated or replacement cable must be indoor/outdoor 3-conductor cable of type
ST, SJT, SE, SJE, SO or SJO
FEATURES
http://airpax.sensata.com/ PGFI Series - 15 Amp Plug Series 269
Electrical wet locations
Power generators
Agricultural equipment
Outdoor electrical equipment
Cement cutting equipment
Portable electric heaters
Submersible pumps
Pipeline heaters
Automotive garages
Industrial part washers
Outdoor signage
Vending equipment
Tri-tap Field wireableOEM Cordset (SJOOW)
RELATED CODES
Confined Space OSHA 29 CFR 1926.404 (b)(1)(ii),
OSHA 29 CFR 1926.405 (a)(2)(ii)(G)
Construction Sites (NEC 590.6)
Commercial Garages (NEC 511.12)
Outdoor Signs (NEC 600.10)
Fountains & Water
Displays
(NEC 680.58)
Spa & Hot Tubs (NEC 680.40)
Marinas & Boat Yards (NEC 555.3)
2 Reset Type
M11 Manual
A11 Automatic
3 Cable Gauge
No designation
No cable required
(field wireable)
0 12 gauge, 3 conductor
1 14 gauge (15 amp)
2 16 gauge (13 amp)
3 18 gauge (10A)
4 Cable Type
No designation
No cable required
(field wireable)
K SJTW (yellow)
J SJ00W (black)
5 Connector
No designation
No cable required
(field wireable)
Y cULus 943 Listed
N No connector
PGFP - M11 0 K Y - ST2
Product Type
1
Note: 1. Manual configuration should be specified if automatic power-up, after power restoration of circuit power, could create an unsafe condition.
2. Integrated or replacement cable must be indoor/outdoor 3-conductor cable of type ST, SJT, SE, SJE, SO or SJO
3. Custom cord sets are available. Please consult Airpax for other options
6 Cable Configuration
No designation
No cable required
(field wireable)
ST2 Single-tap, 2’ yellow cable
TT2 Tri-tap, 2’ yellow cable
ST25 Single-tap, 25’ yellow cable
TT25 Tri-tap, 25‘ yellow cable
ST50 Single tap, 50’ yellow cable
FL __ Flying leads, specify cable
length in feet
(1)
DECISION TABLES
Ground Fault / Equipment Leakage
