1/17
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
General-purpose Operational Amplifiers / Comparators
SIGNATURE SERIES
Operational Amplifiers
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
Description
The Universal Standard family LM 358 / 324, LM2904 /
2902 monolithic ICs integrate two independent
op-amps and phase compensation capacitors on a
single chip
and feature high-gain, low power consumption, and
an operating voltage range of 3[V] to 32[V]
(single power supply.)
Features
1) Operating temperature range
Commercial Grade LM358/324 family :
0[] to +
70[]
Extended Industrial Grade LM2904/2902 family : -40[] to +125[]
2) Wide operating supply voltage
+3[V] to +32[V] (single supply)
±1.5[V] to ±16[V] (dual sup ply)
3) Low supply current
4) Common-mode input voltage range including ground
5) Differential input voltage range equal to maximum rated supply voltage
6) High large signal voltage gain
7) Wide output voltage range
Pin Assignment
No.11094EBT05
SIGNATURE
SERIES
LM358 family LM324 family
Quad
LM2904 famil
y
LM2902 famil
y
LM358DT
LM358PT
LM358ST
LM358WDT
LM358WPT
LM324DT
LM324PT
LM324WDT
LM2904DT
LM2904PT
LM2904ST
LM2904WDT
LM2904WPT
Dual
LM2902DT
LM2902PT
LM2902WDT
LM324WDT
LM324DT
TSSOP8 TSSOP14
LM358DT LM324PTLM358PT
LM358WPT LM2902PT
LM358ST
LM358WDT
LM2904DT LM2904PT
SO package14
SO package8 Mini SO8
LM2904WDT LM2904WPT
LM2904ST LM2902DT
LM2902WDT
OUTPUT 1 1
2
3
4
INVERTING
INPUT 1
Vcc
OUTPUT 2
Vcc
8
7
6
5
NON-INVERTING
INPUT 1 NON-INVERTING
INPUT 2
INVERTING
INPUT 2
1
2
3
4
5
6
7
14
13
12
11
10
9
8
OUTPUT 1
INVERTING
INPUT 1
VccVcc
NON-INVERTING
INPUT 1
NON-INVERTING
INPUT 2
INVERTING
INPUT 2
OUTPUT 2
OUTPUT 4
INVERTING
INPUT 4
NON-INVERTING
INPUT 4
NON-INVERTING
INPUT 3
INVERTING
INPUT 3
OUTPUT 3
Technical Note
2/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Absolute Maximum Ratings (Ta=25[ ])
Parameter Symbol Rating Unit
LM358 family LM324 family LM2904 family LM2902 family
Supply Voltage VDD +32 V
Operating Temperature Range Topr 0 to +70 -40 to +125
Storage Temperature Range Tstg -65 to +150
Input Common-mode Voltage VICM -0.3 to +32 V
Maximum Junction Temperature Tjmax +150
Electric Characteristics
LM358,LM324 family(Unless otherwise specified, Vcc+=+5[V], Vcc-=0[V])
Parameter Symbol
Temperature
range
Limit
Unit Conditions Fig.
No
LM358 family LM324 family
Min. Typ. Max. Min. Typ. Max.
Input Offset Voltage (*1) VIO 25 2 7 7
mV VO=1.4[V],RS=0[]
5[V]< Vcc+<30[V]
0<VIC< Vcc+-1.5[V] 98
Full range 9 9
Input Offset Current (*1) IIO 25 2 30 2 30
nA VO=1.4[V] 98
Full range 100
Input Bias Current (*1) IIB 25 20 150 20 150 nA VO=1.4[V] 98
Full range 200 300
Large Signal Voltage Gain AVD 25 25 100 25 100 V/mV
Vcc+=15[V]
VO=1.4[V] to 11.4[V]
RL=2[k] 98
Supply Voltage Rejection Ratio SVR 25 65 100 65 110 dB RS10[k]
Vcc+=5[V] to 30[V] 98
Full range 65 65
Supply Current (All Amp) ICC
25 0.7 1.2
mA
Vcc+=5[V],No Load
99
25 1.5 3 Vcc+=30[V],No Load
Full range 0.7 1.2 0.8 3 Vcc+=5[V],No Load
Full range 2 1.5 3 Vcc+=30[V],No Load
Input Common-mode Voltage Range VICM 25 Vcc+-1.5 Vcc+-1.5 V Vcc+=30[V] 98
Full range Vcc+-2.0 Vcc+-2.0
Common-mode Rejection Ratio CMR 25 70 85 70 80 dB RS10[k] 98
Full range 60 60
Output Short Circuit Current (*2) Isource 25 20 40 60 20 40 70 mA
Vcc+=15[V],VO=+2[V]
VID=+1[V] 99
Output Sink Current (*2) Isink 25 10 20 10 20 mA
VO=+2[V],
Vcc+=15[V],VID=-1[V] 99
12 50 12 50 μA VO=+0.2[V],
Vcc+=15[V] ,VID=-1[V]
Output Voltage Swing Vopp 25 0 Vcc+-1.5 V RL=2[k] 99
Full range 0 Vcc+-2.0
High Level Output Voltage VOH 25 27 28 27 28 V Vcc+=30[V],RL=10[k] 99
Full range 27 27
Low Level Output Voltage VOL 25 5 20 5 20
mV RL=10[k] 99
Full range 20 20
Slew Rate SR 25 0.6 0.4 V/μs
RL=2[k],CL=100[pF],
Vcc+=15[V]
VI=0.5[V] to 3[V],
Unity Gain
99
Gain Bandwidth Product GBP 25 1.1 1.3 MHz
Vcc+=30[V],RL=2[k],
CL=100[pF]
VIN=10[mV],f=100[kHz] 99
Total Harmonic Distortion THD 25 0.02 0.015 f=1[kHz],AV=20[dB]
RL=2[k]
CL=100[pF],VO=2[Vpp] 99
Input Equivalent Noise Voltage en 25 55 40 HznV/ f=1[kHz],RS=100[]
Vcc+=30[V] 99
Input Offset Voltage Drift DVIO 7 7 μV/
Input Offset Current Drift DIIO 10 10 pA/
Channel Separation VO1/VO2 25 120 120 dB 1[kHz]f20[kHz] 99
(*1) Absolute value
(*2) Under high temperatures, please consider the power dissipation when selecting the output current.
When output terminal is continuously shorted the output current reduces the internal temperature by flushing.
Technical Note
3/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
LM2904,LM2902 family(Unless otherwise specified, Vcc+=+5[V], Vcc-=0[V])
Parameter Symbol
Temperature
range
Limit
Unit Conditions Fig.
No
LM2904 family LM2902 family
Min. Typ. Max. Min. Typ. Max.
Input Offset Voltage (*3) VIO 25 2 7 2 7
mV VO=1.4[V] 98
Full range 9 9
Input Offset Current (*3) IIO 25 2 50 2 30
nA VO=1.4[V] 98
Full range 200 200
Input Bias Current (*3) IIB 25 20 150 20 150 nA VO=1.4[V] 98
Full range 200 300
Large Signal Voltage Gain AVD 25 25 100 25 100 V/mV
Vcc+=15[V]
VO=1.4[V] to 11.4[V]
RL=2[k] 98
Supply Voltage Rejection Ratio SVR 25 65 100 65 110 dB RS10[k] 99
Full range 65 65
Supply Current (All Amp) ICC
25 0.7 1.2 0.7 1.2
mA
Vcc+=5[V],No Lord
99
25 1.5 3 Vcc+=30[V],No Lord
Full range 2 0.8 1.2 Vcc+=5[V],No Lord
Full range 1.5 3 Vcc+=30[V],No Lord
Input Common-mode Voltage Range VICM 25 Vcc+-1.5 Vcc+-1.5 V Vcc+=30[V] 98
Full range Vcc+-2.0 Vcc+-2.0
Common-mode Rejection Ratio CMR 25 70 85 70 80 dB RS=10[k] 98
Full range 60 60
Output Short Circuit Current (*4) Isource 25 20 40 60 20 40 70 mA
Vcc+=+15[V],VO=+2[V]
VID=+1[V] 98
Output Sink Current (*4) Isink 25 10 20 10 20 mA
VO=2[V],Vcc+=+5[V]
VID=-1[V] 99
12 50 12 50 μA VO=+0.2[V],
Vcc+=+15[V] ,VID=-1[V]
Output Voltage Swing Vopp 25 0 Vcc+-1.5 V RL=2[k] 99
Full range 0 Vcc+-2.0
High Level Output Voltage VOH 25 27 27 28 V Vcc+=30[V],RL=10[k] 99
Full range 27 28 27 Vcc+=30[V],RL=10[k]
Low Level Output Voltage VOL 25 5 20 5 20
mV RL=10[k] 99
Full range 20 20
Slew Rate SR 25 0.6 0.4 V/μs
RL=2[k],CL=100[pF],
Unity Gain
VI=0.5[V] to 3[V]
Vcc+=1.5[V]
99
Gain Bandwidth Product GBP 25 1.1 1.3 MHz
Vcc+=30[V],RL=2[k]
CL=100[pF]
VIN=10[mV] 99
Total Harmonic Distortion THD 25 0.02 0.015
f=1[kHz],AV=20[dB]
RL=2[k]
CL=100[pF],
Vcc+=30[V],VO=2[Vpp]
99
Input Equivalent Noise Voltage en 25 40 HznV/ f=1[kHz],RS=100[]
Vcc+=30[V] 99
Input Offset Voltage Drift DVIO 7 7 μV/ -
Input Offset Current Drift DIIO 10 10 pA/ -
Channel Separation VO1/VO2 25 120 120 dB 1[kHz]f20[kHz] 99
(*3) Absolute value
(*4) Under high temperatures, please consider the power dissipation when selecting the output current.
When the output terminal is continuously shorted the output current reduces the internal temperature by flushing.
Technical Note
4/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM358 family
(*)The data above is ability value of sample, it is not guaranteed.
0
200
400
600
800
0 25 50 75 100
AMBIENT TEMPERATURE : Ta []
POWER DISSIPATION Pd [mW]
25
25
Supply Current – Supply Voltage
0
Supply Current – Ambient Temperature
3V
32V
5V
Derating Curve
Maximum Output Voltage – Supply Voltage
(RL=10[k])
0
Maximum Output Voltage – Ambient Temperature
(VCC=5[V],RL=2[k])
Output Source Current – Output Voltage
(VCC=5[V])
0
25
70
Output Source Current – Ambient Temperature
(VOUT=0[V])
15V
3V
5V
Output Sink Current – Output Voltage
(VCC=5[V])
0
25
70
Output Sink Current – Ambient Temperature
(VOUT=VCC)
3V
5V
15V
Low Level Sink Current - Supply Voltage
(VOUT=0.2[V])
0
25
Low Level Sink Current - Ambient Temperature
(VOUT=0.2[V])
32V
5V
3V
Input Offset Voltage - Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
0 25
LM358 family
70
70
70
70
LM358 family LM358 famil
y
LM358 family
LM358 family LM358 family LM358 famil
y
LM358 famil
y
LM358 famil
y
LM358 famil
y
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
Fig. 7 Fig. 8 Fig. 9
Fig. 10 Fig. 11 Fig. 12
LM358 famil
y
LM358 family
LM358PT
LM358WPT
LM358ST
LM358DT
LM358WDT
70
[]
Technical Note
5/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM358 family
(*)The data above is ability value of sample, it is not guaranteed.
Input Bias Current – Ambient Temperature
(VCC=30[V],Vicm=28[V],VOUT=1.4[V])
Input Offset Voltage – Common Mode Input Voltage
(VCC=5[V])
Input Bias Current – Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
Input Offset Voltage – Ambient Temperature
(Vicm=0[V], VOUT=1.4[V])
3V
32V
5V
0 25
Input Bias Current – Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
3V 5V
Input Offset Current – Supply Voltage
(Vicm=0[V],VOUT=1.4[V])
0 25
Input Offset Current
– Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
3V
32V
5V
0
25
0
70
25
Large Signal Voltage Gain
– Ambient Temperature
(RL=2[k])
15V
5V
0 25
Common Mode Rejection Ratio
– Supply Voltage
Common Mode Rejection Ratio
– Ambient Temperature
5V 3V
32V
Power Supply Rejection Ratio
– Ambient Temperature
Large Signal Voltage Gain
– Supply Voltage
(RL=2[k])
70
70
70
32V
70
LM358 family LM358 family LM358 famil
y
LM358 family LM358 famil
y
LM358 famil
y
LM358 famil
y
LM358 famil
y
LM358 family
LM358 famil
y
LM358 family LM358 famil
y
Fig. 13 Fig. 14 Fig. 15
Fig. 16 Fig. 17 Fig. 18
Fig. 19 Fig. 20 Fig. 21
Fig. 22 Fig. 23 Fig. 24
36V
[V]
Technical Note
6/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM324 family
(*)The data above is ability value of sample, it is not guaranteed.
0
200
400
600
800
1000
0 25 50 75 100
AM B IENT TEM PER ATUR E : Ta []
POWER DISSIPATION Pd [mW]
25
25
Supply Current – Supply Voltage
0
Supply Current – Ambient Temperature
3V
32V
5V
Derating Curve
Maximum Output Voltage – Supply Voltage
(RL=10[k])
0
Maximum Output Voltage – Ambient Temperature
(VCC=5[V],RL=2[k])
Output Source Current – Output Voltage
(VCC=5[V])
0
25
70
Output Source Current – Ambient Temperature
(VOUT=0[V])
15V
3V
5V
Output Sink Current – Output Voltage
(VCC=5[V])
0
25
70
Output Sink Current – Ambient Temperature
(VOUT=VCC)
3V
5V
15V
Low Level Sink Current - Supply Voltage
(VOUT=0.2[V])
0
25
Low Level Sink Current - Ambient Temperature
(VOUT=0.2[V])
32V
5V
3V
Input Offset Voltage - Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
0 25
LM324 family
70
70
70
70
BA2904 family BA2904 family
LM324 family LM324 famil
y
LM324 famil
y
LM324 family LM324 family LM324 family
LM324 famil
y
LM324 famil
y
LM324 famil
y
Fig. 25 Fig. 26 Fig. 27
Fig. 28 Fig. 29 Fig. 30
Fig. 31 Fig. 32 Fig. 33
Fig. 34 Fig. 35 Fig. 36
LM324 family LM324 famil
y
LM324ST
LM324DT
LM324WDT
70
[]
Technical Note
7/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM324 family
(*)The data above is ability value of sample, it is not guaranteed.
Input Bias Current – Ambient Temperature
(VCC=30[V],Vicm=28[V],VOUT=1.4[V])
Input Offset Voltage – Common Mode Input Voltage
(VCC=5[V])
Input Bias Current – Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
Input Offset Voltage – Ambient Temperature
(Vicm=0[V], VOUT=1.4[V])
3V
32V
5V
0 25
Input Bias Current – Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
5V
Input Offset Current – Supply Voltage
(Vicm=0[V],VOUT=1.4[V])
0 25
Input Offset Current – Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
3V
32V
5V
0
25
0
70
25
Large Signal Voltage Gain
– Ambient Temperature
(RL=2[k])
15V
5V
0 25
Common Mode Rejection Ratio
– Supply Voltage
Common Mode Rejection Ratio
– Ambient Temperature
5V 3V
32V
Power Supply Rejection Ratio
– Ambient Temperature
Large Signal Voltage Gain – Supply Voltage
(RL=2[k])
70
70
70
32V
70
LM324 family LM324 family LM324 famil
y
LM324 family LM324 famil
y
LM324 famil
y
LM324 famil
y
LM324 famil
y
LM324 family
LM324 famil
y
LM324 family LM324 famil
y
Fig. 37 Fig. 38 Fig. 39
Fig. 40 Fig. 41 Fig. 42
Fig. 43 Fig. 44 Fig. 45
Fig. 46 Fig. 47 Fig. 48
[V]
36V
3V
Technical Note
8/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM2904 family
(*)The data above is ability value of sample, it is not guaranteed.
0.0
0.2
0.4
0.6
0.8
1.0
0 10203040
SUPPLY VOLTAGE [ V]
SUPPLY CURRENT [mA]
0.0
0.2
0.4
0.6
0.8
1.0
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
SUPPLY CURRENT [mA]
0
200
400
600
800
0 25 50 75 100 125 150
AM B IENT TEMPER A TUR E : Ta []
POWER DISSIPATION Pd [mW]
0
10
20
30
40
010203040
SUPPLY VOLTAGE [V]
MAXIMU M OUTPUT VOLTA GE [ V]
0
1
2
3
4
5
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
MAXIMUM OUTPUT VOLTAGE [V]
0
10
20
30
40
50
012345
OUTPUT VOLTAGE [V]
O UTPUT S OURCE CURRENT [mA]
0
10
20
30
40
50
60
70
80
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
LOW LEVEL SINK CURRENT [μA]
0
10
20
30
40
50
60
70
80
-50-250 255075100125150
AMBIENT TEMPERATURE []
LOW LEVEL SINK CURRENT [μA]
-8
-6
-4
-2
0
2
4
6
8
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
INPUT OF F SET VOLT AG E [mV]
0
10
20
30
40
50
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
OUTPUT SOURCE CURRENT [mA]
0.001
0.01
0.1
1
10
100
0 0.4 0.8 1.2 1.6 2
OUTPUT VOLTAGE [V]
OUTPUT SINK CURRENT [mA]
0
10
20
30
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
OUTPUT SINK CURRENT [mA]
25
25
125
Supply Current – Supply Voltage
40
Supply Current – Ambient Temperature
3V
32V
5V
Derating Curve
Maximum Output Voltage – Supply Voltage
(RL=10[k])
-40
Maximum Output Voltage – Ambient Temperature
(VCC=5[V],RL=2[k])
Output Source Current – Output Voltage
(VCC=5[V])
-40
25
105
Output Source Current – Ambient Temperature
(VOUT=0[V])
15V
3V
5V
Output Sink Current – Output Voltage
(VCC=5[V])
-40
25
105
Output Sink Current – Ambient Temperature
(VOUT=VCC)
3V
5V
15V
Low Level Sink Current - Supply Voltage
(VOUT=0.2[V])
-40
125
25
Low Level Sink Current - Ambient Temperature
(VOUT=0.2[V])
32V
5V
3V
Input Offset Voltage - Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
-40 25
125
LM2904 family
125
105
105
125
105
125
105
LM2904 family LM2904 famil
y
LM2904 famil
y
LM2904 family LM2904 family LM2904 family
LM2904 famil
y
LM2904 famil
y
LM2904 famil
y
Fig. 49 Fig. 50 Fig. 51
Fig. 52 Fig. 53 Fig. 54
Fig. 55 Fig. 56 Fig. 57
Fig. 58 Fig. 59 Fig. 60
LM2904 famil
y
LM2904 famil
y
LM2904PT
LM2904WPT
LM2904ST
LM2904DT
LM2904WDT
[]
Technical Note
9/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM2904 family
(*)The data above is ability value of sample, it is not guaranteed.
-8
-6
-4
-2
0
2
4
6
8
-50 -25 0 25 50 75 100 125 150
AMBIEN T TEMPER ATURE []
INPUT OF F SET VOLTAGE [mV]
0
10
20
30
40
50
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
INPUT BIAS CURRENT [nA]
0
10
20
30
40
50
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
INPUT BIAS CURRENT [nA]
-10
0
10
20
30
40
50
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
INPUT BIAS CURRENT[nA]
-8
-6
-4
-2
0
2
4
6
8
-1012345
INPUT VOLTAGE [Vin]
INPUT OFFSET VOLTAGE [mV]
-10
-5
0
5
10
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
INPUT OFFSET CURRENT [nA]
40
60
80
100
120
140
010203040
SUPPLY VOLTAGE [V]
COMMON MO DE REJECTION RATIO [dB]
40
60
80
100
120
140
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATU RE [ ]
COMMON MO DE REJECTION RATIO [dB]
60
70
80
90
100
110
120
130
140
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATUR E []
POWER SUPPLY REJECTION RATIO [dB]
Input Bias Current – Ambient Temperature
(VCC=30[V],Vicm=28[V],VOUT=1.4[V])
-10
-5
0
5
10
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
INPUT OF FSET CU RR ENT [nA]
60
70
80
90
100
110
120
130
140
4 6 8 10121416
SUPPLY V OLTAGE [V]
LARGE SIGNAL VOLTAGE GAIN [dB]
60
70
80
90
100
110
120
130
140
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
LARGE SIGNAL VOLT AGE G AIN [dB]
Input Offset Voltage – Common Mode Input Voltage
(VCC=5[V])
Input Bias Current – Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
Input Offset Voltage – Ambient Temperature
(Vicm=0[V], VOUT=1.4[V])
3V
32V
5V
125
-40 25
Input Bias Current – Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
3V 5V
Input Offset Current – Supply Voltage
(Vicm=0[V],VOUT=1.4[V])
-40 25
125
Input Offset Current – Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
3V
32V
5V
-40
25 125
-40
105
25
Large Signal Voltage Gain
– Ambient Temperature
(RL=2[k])
15V
5V
-40
125
25
Common Mode Rejection Ratio
– Supply Voltage
Common Mode Rejection Ratio
– Ambient Temperature
5V 3V
32V
Power Supply Rejection Ratio
– Ambient Temperature
Large Signal Voltage Gain – Supply Voltage
(RL=2[k])
105
125
105
105
32V
105
LM2904 family LM2904 family LM2904 famil
y
LM2904 family LM2904 famil
y
LM2904 famil
y
LM2904 famil
y
LM2904 famil
y
LM2904 family
LM2904 famil
y
LM2904 family LM2904 famil
y
Fig. 61 Fig. 62 Fig. 63
Fig. 64 Fig. 65 Fig. 66
Fig. 67 Fig. 68 Fig. 69
Fig. 70 Fig. 71 Fig. 72
[V]
36V
Technical Note
10/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM2902 family
(*)The data above is ability value of sample, it is not guaranteed.
0.0
0.2
0.4
0.6
0.8
1.0
0 10203040
SUPPLY VOLTAGE [ V]
SUPPLY CURRENT [mA]
0.0
0.2
0.4
0.6
0.8
1.0
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
SUPPLY CURRENT [mA]
0
200
400
600
800
1000
0 25 50 75 100 125 150
AMBIENT TEMPER ATURE : Ta []
POWER DISSIP ATION P d [m W]
0
10
20
30
40
010203040
SUPPLY VOLTAGE [V]
MAXIMU M OUTPUT VOLTA GE [ V]
0
1
2
3
4
5
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
MAXIMUM OUTPUT VOLTAGE [V]
0
10
20
30
40
50
012345
OUTPUT VOLTAGE [V]
O UTPUT S OURCE CURRENT [mA]
0
10
20
30
40
50
60
70
80
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
LOW LEVEL SINK CURRENT [μA]
0
10
20
30
40
50
60
70
80
-50-250 255075100125150
AMBIENT TEMPERATURE []
LOW LEVEL SINK CURRENT [μA]
-8
-6
-4
-2
0
2
4
6
8
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
INPUT OF F SET VOLT AG E [mV]
0
10
20
30
40
50
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
OUTPUT SOURCE CURRENT [mA]
0.001
0.01
0.1
1
10
100
0 0.4 0.8 1.2 1.6 2
OUTPUT VOLTAGE [V]
OUTPUT SINK CURRENT [mA]
0
10
20
30
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
OUTPUT SINK CURRENT [mA]
25
25
125
Supply Current – Supply Voltage
40
Supply Current – Ambient Temperature
3V
32V
5V
Derating Curve
Maximum Output Voltage – Supply Voltage
(RL=10[k])
-40
Maximum Output Voltage – Ambient Temperature
(VCC=5[V],RL=2[k])
Output Source Current – Output Voltage
(VCC=5[V])
-40
25
105
Output Source Current – Ambient Temperature
(VOUT=0[V])
15V
3V
5V
Output Sink Current – Output Voltage
(VCC=5[V])
-40
25
105
Output Sink Current – Ambient Temperature
(VOUT=VCC)
3V
5V
15V
Low Level Sink Current - Supply Voltage
(VOUT=0.2[V])
-40
125
25
Low Level Sink Current - Ambient Temperature
(VOUT=0.2[V])
32V
5V
3V
Input Offset Voltage - Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
-40 25
125
LM2902 family
125
105
105
125
105
125
105
LM2902 family LM2902 famil
y
LM2902 famil
y
LM2902 family LM2902 family LM2902 family
LM2902 famil
y
LM2902 famil
y
LM2902 famil
y
Fig. 73 Fig. 74 Fig. 75
Fig. 76 Fig. 77 Fig. 78
Fig. 79 Fig. 80 Fig. 81
Fig. 82 Fig. 83 Fig. 84
LM2902 famil
y
LM2902 famil
y
LM2902ST
LM2902DT
LM2902WDT
[]
Technical Note
11/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Reference Data LM2902 family
(*)The data above is ability value of sample, it is not guaranteed.
-8
-6
-4
-2
0
2
4
6
8
-50 -25 0 25 50 75 100 125 150
AMBIEN T TEMPER ATURE []
INPUT OF F SET VOLTAGE [mV]
0
10
20
30
40
50
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
INPUT BIAS CURRENT [nA]
0
10
20
30
40
50
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
INPUT BIAS CURRENT [nA]
-10
0
10
20
30
40
50
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
INPUT BIAS CURRENT[nA]
-8
-6
-4
-2
0
2
4
6
8
-1012345
INPUT VOLTAGE [Vin]
INPUT OFFSET VOLTAGE [mV]
-10
-5
0
5
10
0 5 10 15 20 25 30 35
SUPPLY VOLTAGE [V]
INPUT OFFSET CURRENT [nA]
40
60
80
100
120
140
010203040
SUPPLY VOLTAGE [V]
COMMON MO DE REJECTION RATIO [dB]
40
60
80
100
120
140
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATU RE [ ]
COMMON MO DE REJECTION RATIO [dB]
60
70
80
90
100
110
120
130
140
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATUR E []
POWER SUPPLY REJECTION RATIO [dB]
Input Bias Current – Ambient Temperature
(VCC=30[V],Vicm=28[V],VOUT=1.4[V])
-10
-5
0
5
10
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
INPUT OF FSET CU RR ENT [nA]
60
70
80
90
100
110
120
130
140
4 6 8 10121416
SUPPLY V OLTAGE [V]
LARGE SIGNAL VOLTAGE GAIN [dB]
60
70
80
90
100
110
120
130
140
-50 -25 0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
LARGE SIGNAL VOLT AGE G AIN [dB]
Input Offset Voltage – Common Mode Input Voltage
(VCC=5[V])
Input Bias Current – Supply Voltage
(Vicm=0[V], VOUT=1.4[V])
Input Offset Voltage – Ambient Temperature
(Vicm=0[V], VOUT=1.4[V])
3V
32V
5V
125
-40 25
Input Bias Current – Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
3V 5V
Input Offset Current – Supply Voltage
(Vicm=0[V],VOUT=1.4[V])
-40 25
125
Input Offset Current – Ambient Temperature
(Vicm=0[V],VOUT=1.4[V])
3V
32V
5V
-40
25 125
-40
105
25
Large Signal Voltage Gain
– Ambient Temperature
(RL=2[k])
15V
5V
-40
125
25
Common Mode Rejection Ratio
– Supply Voltage
Common Mode Rejection Ratio
– Ambient Temperature
5V
3V
32V
Power Supply Rejection Ratio
– Ambient Temperature
Large Signal Voltage Gain – Supply Voltage
(RL=2[k])
105
125
105
105
32V
105
LM2902 family LM2902 family LM2902 famil
y
LM2902 family LM2902 famil
y
LM2902 famil
y
LM2902 famil
y
LM2902 famil
y
LM2902 family
LM2902 famil
y
LM2902 family LM2902 famil
y
Fig. 85 Fig. 86 Fig. 87
Fig. 88 Fig. 89 Fig. 90
Fig. 91 Fig. 92 Fig. 93
Fig. 94 Fig. 95 Fig. 96
[V]
36V
Technical Note
12/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Circuit Diagram
Measurement Circuit 1 NULL Method Measurement Cond ition Vcc+, Vcc-, EK, Vicm Unit: [V]
Parameter VF S1 S2 S3 LM35 8/LM324 family LM2904/LM2902 family Calculation
Vcc+ Vcc- EK Vicm Vcc+ Vcc- EK Vicm
Input Offset V oltage VF1 ON ON OFF 5 t o 3 0 0 -1.4 0 5 t o 3 0 0 -1.4 0 1
Input Offset Current VF2 OFF OFF OFF 5 0 -1.4 0 5 0 -1.4 0 2
Input Bias Current VF3 OFF ON OFF 5 0 -1.4 0 5 0 -1.4 0 3
VF4 ON OFF 5 0 -1.4 0 5 0 -1.4 0
Large Signal Voltage Gain VF5 ON ON ON 15 0 -1.4 0 15 0 -1.4 0 4
VF6 15 0 -11.4 0 15 0 -11.4 0
Common-mode Rejection Ra tio VF7 ON ON OFF 5 0 -1.4 0 5 0 -1.4 0 5
VF8 5 0 -1.4 3.5 5 0 -1.4 3.5
Supply Voltage Rejection Ratio VF9 ON ON OFF 5 0 -1.4 0 5 0 -1.4 0 6
VF10 30 0 -1.4 0 30 0 -1.4 0
Calculation
1. Input Offset Voltage (VIO)
2. Input Offset Current (IIO)
3. Input Bias Current (IIB)
4. Large Signal Voltage Gain (AVD)
5.Common-mode Rejection R ation (CMRR)
6. Supply Voltage Rejection Ration (SVR)
Fig.98 Measurement circuit 1 (Each Op-Amps)
Fig.97 Circuit Diagram (each Op-Amp)
OUTPUT
INVERTING
INPUT
NON-INVERTING
INPUT
Vcc
+
Vcc
-
Vcc
+=25V
PSRR
20×Log Vcc
+×(1+Rf/Rs)
VF10 - VF9 [dB]
VF8-VF7 Rs)Rf
/
(1+
Log
CMRR 3.5× [dB]
20×
VF6 - VF5
/Rs)R
f
(1+
Log20×
10×
AV
[dB]
Rf / Rs) (1+ Ri VF3
VF4 -
Ib [A]
/ Rs)R
f
(1+Ri VF1VF2 -
Iio [A]
[V]
/RsR
f
1+
VF1
Vio
50[]
50[]10[k]
10[k]
50[k]
50[k] 500[k]
500[k]
VOUT
R
f
EK
S1
S2
S3
Ri
Ri
Rs
Rs
R
f
RL
Vicm DUT
Vcc+
Vcc-VF
0.1[μF]
0.1[μF]
1000[pF]
+15[V]
-15[V] V
Technical Note
13/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Measurement circuit2 Switch condition
SW No. SW
1 SW
2 SW
3 SW
4 SW
5 SW
6 SW
7 SW
8 SW
9 SW
10 SW
11 SW
12 SW
13 SW
14 SW
15
Supply Current OFF OFF OFF ON OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF
High level Output Voltage OFF OFF ON OFF OFF OFF ON OFF OFF ON OFF OFF OFF ON OFF
Low level Output Voltage OFF OFF ON OFF OFF OFF ON OFF OFF OFF OFF OFF OFF ON OFF
Output source current OFF OFF ON OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON
Output sink current OFF OFF ON OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON
Slew Rate OFF OFF OFF ON OFF OFF OFF OFF ON ON ON OFF OFF OFF OFF
Gain band width product OFF ON OFF OFF OFF ON ON OFF OFF ON ON OFF OFF OFF OFF
Equivalent input noise voltage ON OFF OFF OFF ON OFF ON OFF OFF OFF OFF ON OFF OFF OFF
Measurement Circuit3 Channel S eparation
Fig.99 Measurement circuit2 (Each Op-Amps) Fig.100 Slew Rate Input Waveform
Fig.101 Measurement Circuit3
Vcc +
Vcc -
V
SW1 SW2 SW3
SW11 SW12 SW13
A
VIN- VIN+ RL
SW10
SW7 SW8 SW9
CL
SW15
VVOUT
RS
SW6
SW5
SW4
R1
R3
R2
SW14
SR
ΔV / Δt
Input voltage
t
Input waveform
3[V]
0.5[V]
t
Output waveform
3[V]
0.5[V] Δt
Δ
V
Output voltage
VO1/VO2=20×log 100×VOUT1
VOUT2
VIN V VOUT1
=0.5 [Vrms]
Vcc+=+2.5[V]
Vcc-=-2.5[V]
CH1
R1=1[k]
R2=100[k]
R1//R2
Vcc+
=+2.5[V]
Vcc
-
=-2.5[V]
othe
r
CH
VOUT2
R1=1[k]
R2=100[k]
R1//R2 V
Technical Note
14/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Description of Ele ctrical Characterist ics
Described below are descriptions of the relevant electrical terms
Please note that item names, symbols and their meanings may differ from those on another manufacturer’s documents.
1.Absolute maximum ratings
The absolute maximum ratings are values that should never be exceeded, since doing so may result in deterioration of electrical characteristics or damage to
the part itself as well as peripheral components.
1.1 Power supply voltage (Vcc+/Vcc-)
Expresses the maximum voltage that can be supplied between the positive and negative supply terminals without causing deterioration of the electrical
characteristics or destru ction of the internal circuitry.
1.2 Differential input voltage (VID)
Indicates the maximum voltage that can be supplied between the non-inverting and inverting terminals without damaging the IC.
1.3 Input common-mode voltage range (VICM)
Signifies the maximum voltage that can be supplied to non-inverting and inverting terminals without causing deterioration of the characteristics or damage to
the IC itself. Normal operation is not guaranteed within the common-mode voltage range of the maximum ratings – use within the input common-mode
voltage range of the electric characteristics instead.
1.4 Operating and storage temperature ranges (Topr,Tstg)
The operating temperature range indicates the temperature range within which the IC can operate. The higher the ambient temperature, the lower the power
consumption of the IC. The storage temperature range denotes the range of temperatures the IC can be stored under without causing excessive
deterioration of the electri cal char acteristics.
1.5 Power dissipation (Pd)
Indicates the power that can be consumed by a particular mounted board at ambient temperature (25). For packaged products, Pd is determined by the
maximum junction temperature and the thermal resistance.
2. Electrical characteristics
2.1 Input offset voltage (VIO)
Signifies the voltage difference between the non-inverting and inverting terminals. It can be thought of as the input voltage difference required for setting the
output voltage to 0 V.
2.2 Input offset voltage drift (DVIO)
Denotes the ratio of the input offset voltage fluctuation to the ambient temperature fluctuation.
2.3 Input offset current (IIO)
Indicates the difference of input bias current between the non-inverting and inverting terminals.
2.4 Input offset current drift (DIIO)
Signifies the ratio of the input offset current fluctuation to the ambient temperature fluctuation.
2.5 Input bias current (IIB)
Denotes the current that flows into or out of the input terminal, it is defined by the average of the input bias current at the non-inverting terminal and the input
bias current at the inverting terminal.
2.6 Circuit current (ICC)
Indicates the current of the IC itself that flows under specified conditions and during no-load steady state.
2.7 High level output voltage/low level output voltage (VOH/VOL)
Signifying the voltage range that can be output under specified load conditions, it is in general divided into high level output voltage and low level output
voltage. High level output voltage indicates the upper limit of the output voltage, while low level output voltage the lower limit.
2.8 Large signal voltage gain (AVD)
The amplifying rate (gain) of the output voltage against the voltage difference between non-inverting and inverting terminals, it is (normally) the amplifying
rate (gain) with respect to DC voltage.
AVD = (output voltage fluctuation) / (input offset fluctuation)
2.9 Input common-mode voltage range (VICM)
Indicates the input voltage range under which the IC operates normally.
2.10 Common-mode rejection ratio (CMRR)
Signifies the ratio of fluctuation of the input offset voltage when the in-phase input voltage is changed (DC fluctuation).
CMRR = (change in input common-mode voltage) / (input offset fluctuation)
2.11 Power supply rejection ratio (SVR)
Denotes the ratio of fluctuation of the input offset voltage when supply voltage is changed (DC fluctuation) .
SVR = (change in power supply voltage) / (input offset fluctuation)
2.12 Output source current/ output sink current (IOH/IOL)
The maximum current that can be output under specific output conditions, it is divided into output source current and output sink cu rrent. The o utput sour ce
current indicates the current flowing out of the IC, and the output sink current the current flowing into the IC.
2.13 Channel separation (VO1/VO2)
Expresses the amount of fluctuation of the input offset voltage or output voltage with respect to the change in the output voltage of a driven channel.
2.14 Slew rate (SR)
Indicates the time fluctuation ratio of the output voltage when an input step signal is supplied.
2.15 Gain bandwidth product (GBP)
The product of the specified signal frequency and the gain of the op-amp at such frequency, it gives the approximate value of the frequency where the gain of
the op-amp is 1 (maximum frequency, and unity gain frequency).
Technical Note
15/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Derating curves
Power Dissipation Power Dissipation
Package Pd[W] θja [/W] Package Pd[W] θja [/W]
SO package8 (*8) 450 3.6 SO package14 610 4.9
TSSOP8 (*6) 500 4.0 TSSOP14 870 7.0
Mini SO8 (*7) 470 3.76
Precautions
1) Unused circuits
When there are unused circuits, it is recommended that they be connected as in Fig.103, setting
the non-inverting input terminal to a potential within the in-phase input voltage range (VICM).
2) Input terminal voltage
Applying Vcc- + 32V to the input terminal is possible without causing deterioration of the electrical
characteristics or destruction, irrespective of
the supply voltage. However, this does not ensure normal circuit operation. Please note that the
circuit operates normally only when the input voltage is
within the common mode input voltage range of the electric characteristics.
3) Power supply (single / dual)
The op-amp operates when the voltage supplied is between Vcc+ and Vcc-.
Therefore, the single supply op-mp can be used as a dual supply op-amp as well.
4) Power dissipation (Pd)
Using the unit in excess of the rated power dissipation may cause deterioration in electrical characteristics due to the rise in chip temperature, including
reduced current capability. Therefore, please take into consideration the power dissipation (Pd) under actual operating conditions and apply a sufficient
margin in thermal design. Refer to the thermal derating curves for more information.
5) Short-circuit between pins and erroneous mounting
Incorrect mounting may damage the IC. In addition, the presence of foreign substances between the outputs, the output and the power supply, or the output
and Vcc- may result in IC destruction.
6) Operation in a strong electromagnetic field
Operation in a strong electromagnetic field may cause malfunctions.
7) Radiation
This IC is not designed to withstand radiation.
8) IC handing
Applying mechanical stress to the IC by deflecting or bending the board may cause fluctuation of the electrical characteristics due to piezoelectric (piezo)
effects.
9) IC operation
The output stage of the IC is configured using Class C push-pull circuits. Therefore, when the load resistor is connected to the middle potent ial of Vcc + and
Vcc-, crossover distortion occurs at the changeover between discharging and charging of the output current. Connecting a resistor between the output
terminal and Vcc-, and increasing the bias current for Class A operation will suppress crossover distortion.
10) Board inspection
Connecting a capacitor to a pin with low impedance may stress the IC. Therefore, discharging the capacitor after every process is recommended. In addition,
when attaching and detaching the jig during the inspection phase, ensure that the power is turned OFF before inspection and removal. Furthermore, please
take measures against ESD in the assembly process as well as during transportation and storage.
11) Output capacitor
Discharge of the external output capacitor to Vcc+ is possible via internal parasitic elements when Vcc+ is shorted to Vcc-, causing damage to the internal
circuitry due to thermal stress. Therefore, when using this IC in circuits where oscillation due to output capacitive load does not occur, such as in voltage
comparators, use an output capacitor with a capacitance less than 0.1μF.
0
200
400
600
800
1000
0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
POWER DISSIPATION Pd [mW]
0
200
400
600
800
0 25 50 75 100 125 150
AMBIENT TEMPERATURE []
POWER DISSIPATION Pd [mW]
Fig.103 Disable circuit example
Fig.102 Derating Curves
connect
to Vicm
Vcc+
Vcc-
LM358DR/PWR/DGKR
LM2904DR/PWR/DGKR/VQDR/VQPWR LM324DR/PWR/KDR
LM2902DR/PWR/KDR/KPWR/KQDR/KQPWR
70
LM358ST
LM358DT
LM358WDT
LM2904PT
LM2904WPT
LM2904ST
LM2904DT
LM2904WDT
LM324PT
LM324DT
LM324WDT
LM2902ST
LM2902DT
LM2902WDT
70
LM358PT
LM358WPT
Technical Note
16/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
Ordering part number
L M 2 9 0 2 W D T
Family name
LM358
LM324
LM2902
LM2904
ESD Toleranc e
applicable
W : 2kV
None : Normal
Package type
D : S.O package
P : TSSOP
S : Mini SO
Packaging and forming specification
R: Embossed tape and reel
(Unit : mm)
TSSOP8
0.08 S
0.08
M
4 ± 4
234
8765
1
1.0±0.05
1PIN MARK
0.525
0.245+0.05
0.04
0.65
0.145+0.05
0.03
0.1±0.05
1.2MAX
3.0±0.1
4.4±0.1
6.4±0.2
0.5±0.15
1.0±0.2
(MAX 3.35 include BURR)
S
Order quantity needs to be multiple of the minimum quantity.
<Tape and Reel information>
Embossed carrier tapeTape
Quantity
Direction
of feed
2500pcs
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
()
Direction of feed
Reel 1pin
(Unit : mm)
S.O package14
(Unit : mm)
71
814
(Max 9.0 include BURR) +6°
4°
1.05±0.2
1PIN MARK
3.9±0.1
0.420.04
+0.05
0.22+0.05
0.03
0.515
1.65MAX
1.375±0.075
0.175±0.075
8.65±0.1
0.65±0.15
4°
6.0±0.2
1.27
S
0.08
M
0.08 S
Order quantity needs to be multiple of the minimum quantity.
<Tape and Reel information>
Embossed carrier tapeTape
Quantity
Direction
of feed
2500pcs
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
()
Direction of feed
Reel 1pin
(Unit : mm)(Unit : mm)
S.O package8
0.2±0.1
0.45Min.
234
5678
1
4.9±0.2
0.545
3.9±0.2
6.0±0.3
(MAX 5.25 include BURR)
0.42±0.1
1.27
0.175
1.375±0.1
0.1 S
S
+6°
4°
4°
Order quantity needs to be multiple of the minimum quantity.
<Tape and Reel information>
Embossed carrier tapeTape
Quantity
Direction
of feed
2500pcs
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
()
Direction of feed
Reel 1pin
Technical Note
17/17
LM358DT/PT/ST/WDT/WPT,LM2904DT/PT/ST/WDT/WPT
LM324DT/PT/WDT,LM2902DT/PT/WDT
www.rohm.com 2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
(Unit : mm)
TSSOP14
0.08 S
S
0.08
M
8
7
1
14
(Max 5.35 include BURR)
0.1±0.05
1PIN MARK
1.0±0.2
6.4±0.2
0.245+0.05
0.04
0.65
0.5±0.15
4.4±0.1
1.2MAX
0.145 +0.05
0.03
±44
1.0±0.05
0.55
5.0±0.1
Order quantity needs to be multiple of the minimum quantity.
<Tape and Reel information>
Embossed carrier tapeTape
Quantity
Direction
of feed
2500pcs
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
()
Direction of feed
Reel 1pin
(Unit : mm)
Mini SO8
0.08
M
0.08 S
S
4 ± 4
(MAX 3.35 include BURR)
578
1234
6
3.0±0.1
1PIN MARK
0.95±0.2
0.65
4.9±0.2
3.0±0.1
0.45±0.15
0.85±0.05
0.145
0.1±0.05
0.32
0.525
1.1MAX
+0.05
0.03
+0.05
0.04
Order quantity needs to be multiple of the minimum quantity.
<Tape and Reel information>
Embossed carrier tapeTape
Quantity
Direction
of feed
2500pcs
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
()
Direction of feed
Reel 1pin
R1120
A
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, ofce-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.