MBR2030CTLG Switch-mode Dual Schottky Power Rectifier Features and Benefits * * * * * * * * * * www.onsemi.com Highly Stable Oxide Passivated Junction Very Low Forward Voltage Drop (0.4 Max @ 10 A, TC = 150C) High Junction Temperature High dv/dt Capability Excellent Ability to Withstand Reverse Avalanche Energy Transients Low Power Loss/High Efficiency High Surge Capacity 175C Operating Junction Temperature 20 A Total (10 A Per Diode Leg) This Device is Pb-Free and is RoHS Compliant* SCHOTTKY BARRIER RECTIFIER 20 AMPERES, 30 VOLTS 1 2, 4 3 MARKING DIAGRAM Applications * Power Supply - Output Rectification * Power Management - ORING * Instrumentation 4 TO-220 CASE 221A STYLE 6 Mechanical Characteristics * * * * * * Case: Epoxy, Molded Epoxy Meets UL 94 V-0 @ 0.125 in Weight: 1.9 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Sec ESD Rating: Human Body Model 3B Machine Model C 1 2 AYWW B2030LG AKA 3 A Y WW B2030L G AKA = Assembly Location = Year = Work Week = Device Code = Pb-Free Package = Diode Polarity ORDERING INFORMATION Device Package Shipping MBR2030CTLG TO-220 (Pb-Free) 50 Units/Rail *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2015 January, 2015 - Rev. 5 1 Publication Order Number: MBR2030CTL/D MBR2030CTLG MAXIMUM RATINGS (Per Leg) Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 30 V Average Rectified Forward Current (TC = 167_C) Per Diode Per Device IF(AV) Non-repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 A Peak Repetitive Forward Current (Square Wave, 20 kHz, TC = 166C) IFRM 10 A Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz) IRRM 1.0 A TJ *65 to +175 C Storage Temperature Tstg *65 to +175 C Voltage Rate of Change (Rated VR) dv/dt 1000 V/ms Rating A 10 20 Operating Junction Temperature (Note 1) Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from Junction-to-Ambient: dPD/dTJ < 1/RqJA. THERMAL CHARACTERISTICS (Per Leg) Characteristic Symbol Value Unit Maximum Thermal Resistance, Junction-to-Case (Min. Pad) RqJC 2.0 C/W Maximum Thermal Resistance, Junction-to-Ambient (Min. Pad) RqJA 60 C/W ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 2) (iF = 10 Amps, TJ= 25C) (iF = 10 Amps, TJ = 150C) (iF = 20 Amps, TJ = 25C) (iF = 20 Amps, TJ = 150C) vF Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TJ = 25C) (Rated dc Voltage, TJ = 100C) (Rated dc Voltage, TJ = 125C) iR Min Typ Max - - - - 0.45 0.32 0.51 0.41 0.52 0.40 0.58 0.48 - - - 0.11 10 - 5.0 40 75 Unit V mA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle 10%. www.onsemi.com 2 i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 100 TJ = 175C 10 150C 100C 25C 1.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 100 TJ = 175C 10 25C 1.0 0.1 0.0 I , REVERSE CURRENT (mA) R TJ = 150C TJ = 100C I TJ = 25C 5 10 15 20 VR REVERSE VOLTAGE (VOLTS) 25 30 0.5 0.6 0.7 0.8 0.9 1.0 18 dc RqJA = 16 C/W RqJA = 60 C/W (NO HEATSINK) 14 12 SQUARE WAVE dc 8.0 6.0 4.0 2.0 25 50 75 100 125 1.1 20 18 dc 16 14 12 SQUARE WAVE 10 8.0 6.0 4.0 2.0 0 140 145 150 155 160 165 170 175 180 Figure 4. Current Derating, Case Per Leg P , AVERAGE FORWARD POWER DISSIPATION (WATTS) F (AV) , AVERAGE FORWARD CURRENT (AMPS) F (AV) I 0.4 TC, CASE TEMPERATURE (C) RATED VOLTAGE APPLIED 0 0.3 Figure 2. Maximum Forward Voltage 20 0 0.2 Figure 1. Typical Forward Voltage Figure 3. Typical Reverse Current 10 0.1 vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 10000 4000 2000 1000 400 200 100 40 20 10 4 2 1 0.4 0.2 0.1 0.04 0.02 0.01 0 16 100C 150C vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) , AVERAGE FORWARD CURRENT (AMPS) 0.1 0.0 F (AV) i , INSTANTANEOUS FORWARD CURRENT (AMPS) F MBR2030CTLG 150 175 TA, AMBIENT TEMPERATURE (C) 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 TJ = 175C SQUARE WAVE dc 0 Figure 5. Current Derating, Ambient Per Leg 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 6. Forward Power Dissipation www.onsemi.com 3 MBR2030CTLG 10K TJ = 25C f = 1 MHz C, CAPACITANCE (pF) 5000 3000 2000 1000 500 300 200 100 0.5 1 2 3 5 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Capacitance www.onsemi.com 4 30 50 MBR2030CTLG PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AH -T- B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 N STYLE 6: PIN 1. 2. 3. 4. ANODE CATHODE ANODE CATHODE ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MBR2030CTL/D